HTTP calls to ABAP system

I am pretty new to ABAP technology and want to know what all do I need to read (links will be helpful) to achieve making HTTP calls to ABAP system?
I want to have some sort of REST based APIs which I can call using say browser to ABAP?
Any example or tutorial will be helpful.
Regards,
Arpit

Hi Aamir ,
Thanks for the response.
Tried both but still same issue .
Any more inputs .
Cheers,
Nanda

Similar Messages

  • Load balance for HTTP Connection to ABAP System (Type H) RFC connection

    Experts,
    For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
    My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
    Thanks in advance.
    Mahesh

    Hi Naga
    Could you check the link below?
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
    https://service.sap.com/sap/support/notes/1040325

  • HTTP Connection to ABAP System - Query String Not Allowed message

    Hi All,
    We are trying to create HTTP Connection to ABAP System on a SAP ECC system.
    Following entries are added
    1 Connection Type: H
    2 Target Host: Host name
    3 Service Number: HTTP Port name
    4 Path Prefix: /sap/XI/engine/?type=entry
    It is not allowing me to enter Path prefix as "/sap/XI/engine/?type=entry". It is throwing a warning message as "Query String Not Allowed message".
    As per the documentation it is mentioned that -<b> If the system displays the Query String Not Allowed message, you can ignore it.</b>
    It is not allowing me to save the entries succesfully . I need to remove the path refix entry then only i am able to save other wise it is not allowing me to proceed at all.
    Please let me know what entry i can put for the same or let me know how can i ignore and proceed by saving the path prefix as "/sap/XI/engine/?type=entry".
    Please provide your valuable help on this.
    Regards,
    Nanda

    Hi Aamir ,
    Thanks for the response.
    Tried both but still same issue .
    Any more inputs .
    Cheers,
    Nanda

  • How to enable HTTPS Port in abap system

    Hello All,
    Hope all are doing great,can any one please tell me the procedure step by step how can i enable https port in my only abap system,is it required to enable ssl also for this?..
    Regards,
    Syed

    Hi,
    For enabling the HTTPS port you need to do alot many things
    At first change the para meters in Rz10
    icm/server_port_0 - PROT=HTTPS, PORT=1443, TIMEOUT=900
    icm/HTTPS/verify_client - 1
    ms/server_port_0 - PROT=HTTPS, PORT=1443
    SE80 - Utilities > Settings > Internet Transaction Sevrer = HTTPS
    and also check SMICM under Services HTTPS is not showing as Active
    and still if you are facing any issue with the port check with the network team/firewall team whether any port is being blocked on the network/firewall.
    Regards
    Mohammed nizam

  • How to call external http client from abap system

    Hi All,
    I have browsed through sdn and google but not found any helpful document ,
    Here my requirement is to call external http client from ecc ,
    Pl suggest..,
    Regards,
    Lokeswar .

    Hi Deepak,
    I have followed the below Reference links :
    Example Program: Executing an HTTP Request - Components of SAP Communication Technology - SAP Library
    http://scn.sap.com/thread/2035765
    but while executing  get http responce i'm facing 'HTTP_COMMUNICATION_FAILURE' error
        CALL METHOD L_HTTP_CLIENT->RECEIVE
          EXCEPTIONS
            HTTP_COMMUNICATION_FAILURE = 1
            HTTP_INVALID_STATE         = 2
            HTTP_PROCESSING_FAILED     = 3.
    Pl suggest ,

  • SM59 - HTTP Connection to ABAP System fails

    I am building an http conn from XI to ECC6 for ABAP proxy
    On Connection Test, I get the error - ICM_HTTP_CONNECTION_FAILED
    On running the trace in SMICM, I get the following:
    [Thr  5] *** ERROR => Connection request from (-1/65535/0) to host: srpidev.srhouse.com, service: 8000 failed (NIEHOST_UNKNOWN)
    [Thr  5] *** ERROR => IcmJ2EEScheduleFunc: Connection to srpidev.srhouse.com:8000 failed - please check host configuration (-8)
    I get the foll on running the report: SPROX_CHECK_HTTP_COMMUNICATION
    HTTP communication contains errors (see long text for diagnosis)
    Message no. SPRX086
    Diagnosis
    The HTTP communication of this application server is not functioning correctly.
    When calling the method
    IF_HTTP_CLIENT=>RECEIVE
    the exception
    HTTP_COMMUNICATION_FAILURE
    was triggered.
    The short text for this exception reads as follows:
    Communication Error
    Procedure
    Contact your system administrator
    Can someone please help?
    Thanks in advance.
    Regards,
    Prasad

    Hello Michal,
    Thanks for your response.
    Part of this problem has been solved right now...the http port on the R/3 server is 8002 and not 8000!!
    Changing the port solved my problem from XI to R/3.
    But the R/3 to XI error persists with the same behaviour. I have checked with BASIS, no firewall exists in between.
    I have used the ip add while creating the http conn....do I have to change this elsewhere?
    [Thr  6] Wed Jul 23 15:33:25 2008
    [Thr  6] *** ERROR => Connection request from (-1/65535/0) to host: <hostname masked>, service: 8002 failed (NIEHOST_UNKNOWN) {
    [Thr  6] *** ERROR => IcmJ2EEScheduleFunc: Connection to <hostname masked>:8002 failed - please check host configuration (-8) [
    [Thr 13] Wed Jul 23 15:34:13 2008
    [Thr 13] *** ERROR => PlugInHandleNetData: client: premature EOS - header not complete in response [http_plg_mt. 2627]

  • Restricting number of http calls to XI3.0 system

    Hello,
    Is there any way to restrict the number of http calls from a particular source to XI3.0system? For example if client A making 1000 http calls to XI system., I want to restrict the calls of this particular client to only 300 or divide the calls into certain chunks? Please advice.
    Thanks in advance.

    Hi Guys ,
    Because the destination from client 20 to Integration Server is running it can't be a problem with configuration of XI.
    in my opinion it is a network problem or some problems with the Sending ERP System.
    you test also to make a destination from other R/3 systems like CRM right?
    and nothing works?
    Test to send a Message from this server with wfetch, if this will not work.. it must be a network problem.
    Regards,
    Robin

  • SM59 Error in HTTP connections to ABAP Sytems

    Hi All,
      My scenario is to connect to XI systems... I need to create a RFC destination (HTTP connections to ABAP Systems) in SM 59 with below details.....
    Target host: xyz.abc.com
    Service No. : 0000
    Prefix path : /sap/xi/engine?type=entry
    But SAP GUI is not accepting the character "?" ...
    Can any one tell what can be done to avoid this error?

    Hi,
    it's only a warning -> just press 'Enter' key.
    Regards
    Patrick

  • The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL

    Hi
    We are using SRM 5.0. We are facing a strange problem. We are able to see the initial screen of SRM EBP in the browser. But once the user name and password are provided the system goes for a dump with the following error:
    The following error text was processed in the system SS0 : System error
    The error occurred on the application server <Server Name> and in the work process 0 .
    The termination type was: ABORT_MESSAGE_STATE
    The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL
    <b>SM21 Log:</b>
    Short Text
         Transaction Canceled &9&9&5 ( &a &b &c &d &e &f &g &h &i )
         The transaction has been terminated.  This may be caused by a
         termination message from the application (MESSAGE Axxx) or by an error
         detected by the SAP System due to which it makes no sense to proceed
         with the transaction.  The actual reason for the termination is
         indicated by the T100 message and the parameters.
    Transaction Canceled ITS_P 001 ( )
    Message Id: ITS_P
    Message No: 001
    I just checked these threads but did not help much,
    RABAX_STATE  error after loggin into BBPSTART service in SRM 4.
    ITS_TEMPLATE_NOT_FOUND error
    Besides I tried this note: 790727 as well, still I get the same error.
    Any help would be highly appreciated.
    Thanks in advance
    Kathirvel Balakrishnan

    Hi
    <u>Please do the following steps.</u>
    <b>When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Default host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transaction server-->test service/Publish. (BBPSTART , BBPGLOBAL etc)
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (Transaction -  SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.</b>
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Call http url in Abap - Should not open Browser

    Hi Friends,
       I have a requirement where i need to check whether a perticular http service is running or not. For that i need a some code to call http url from abap and it should not open the browser. If that perticular url is not found or time out then i should know that in program...
    Is there any way to do that..

    just run the following url (after changing the values for host,etc) from browser
    http://<abaphost>.<domain>.com:<port>/sap/public/ping
    to get the values for http://<abaphost>.<domain>.com:<port> just go to transaction se80 and choose bsp application option and choose any existing bsp application and then doubl click on a page. on the right side click on the attributes tab and at the end you can find the url
    Regards
    Raja

  • Calling an ABAP Program from source system in a process chain

    Hi,
    I need to call an ABAP program (Extract program RMBWV308) from R/3 within a Process Chain in BW 3.5
    Your urgent advice please

    Hi,
    check the following link:
    Start an ABAP program in R/3 from a process chain in BW
    regards,
    raju

  • Error when calling R3 backend system

    Hi,
    I have a scenario that sends some data to a Z_Bapi on our R3 system.  The process is failing but I'm SXI_MONI I'm not getting errors reported and I'm not getting the last message from my Inegration Process to my R3 system reported.
    However when I look at the PE and examine the send message synchrounously Work item, I can see the error in the graphic view.  The process runs all the way through my various steps but should then perfrom a transformation before calling the R3 system.  The transformation isn't shown on the graphic and I get an error image which looks like a broken red block on the step which sends the data to the r3 system.
    I realise this is a little cryptic so have provided a trace of the PE manager to see if that helps.  I have checked my adapter (in the adapter monitoring part of the runtime workbench) and that is working fine.  I would be extremely grateful to anyone who was able to help.
    Thanks in advance
    John
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
      <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
      <SAP:MessageId>4395AE1A-A40F-095F-E100-0000AC1E1BAF</SAP:MessageId>
      <SAP:TimeSent>2005-12-06T15:23:10Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Service>BS_CUSTOMER_DATA_TEAM</SAP:Service>
      <SAP:Interface namespace="http://skunkworks.ordnancesurvey.com/custupdate">MI_CUSTOMER_UPDATE_OUTBOUND</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>IPCUSTINTEGRATION</SAP:Service>
      <SAP:Interface namespace="http://skunkworks.ordnancesurvey.com/integration">MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>e+o2Rj6ePbuEqoQgC6bRsg==</SAP:ObjectId>
      <SAP:SWCV>A7YEkB3+EdqlqNjyrB4brw==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      <SAP:Interface namespace="http://skunkworks.ordnancesurvey.com/integration">MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SystemAckRequested="false" SystemErrorAckRequested="false" ApplicationAckRequested="false" ApplicationErrorAckRequested="false" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2005-12-06T15:23:10Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>4395AE1A-A40F-095F-E100-0000AC1E1BAF</SAP:MessageId>
      <SAP:Info>host:ermprot1:8000::remote-addr:172.30.18.12</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2005-12-06T15:23:10Z" wasRead="false">
      <SAP:Engine type="IS">is.00.ermprot1</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>4395AE1A-A40F-095F-E100-0000AC1E1BAF</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2005-12-06T15:23:10Z" wasRead="false">
      <SAP:Engine type="PE" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">PE</SAP:Adapter>
      <SAP:MessageId>4395AE1A-A40F-095F-E100-0000AC1E1BAF</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20051206</SAP:Date>
      <SAP:Time>152310</SAP:Time>
      <SAP:Host>ermprot1</SAP:Host>
      <SAP:SystemId>XID</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>SunOS</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>003</SAP:ProcStatus>
      <SAP:AdapterStatus>001</SAP:AdapterStatus>
      <SAP:User>XIAPPLUSER</SAP:User>
      <SAP:TraceLevel>3</SAP:TraceLevel>
      <SAP:LogSeqNbr>002</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId />
      <SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
      <SAP:PipelineService />
      <SAP:QIdInternal>XBQO$PE_WS90100001</SAP:QIdInternal>
      <SAP:CommitActor>A</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="100">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID">AC1E1BAF09604395ACDE0C4C</SAP:EOReferenceRuntime>
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="MSGID">4395AE1AA40F095FE1000000AC1E1BAF</SAP:EOReferenceOutbound>
      <SAP:MessageSizePayload>605</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>0</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>605</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>526</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>PE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>DEL</SAP:InterfaceAction>
      <SAP:RandomNumber>48</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.348334</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.374455</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.374499</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.537662</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.544475</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.557175</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.557718</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.567097</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.567617</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.5826</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.582648</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.788221</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.794996</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.850987</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.852019</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152310.863395</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="ermprot1">20051206152310.86393</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="end" host="ermprot1">20051206152311.042167</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    - <SAP:OutboundBindingEntry version="30">
      <SAP:OutboundBindingObjectId>43940953D1920960E1000000AC1E1BAF</SAP:OutboundBindingObjectId>
      <SAP:FromPartyName />
      <SAP:FromServiceName />
      <SAP:ToPartyName />
      <SAP:ToServiceName />
      <SAP:ToInterfaceName />
      <SAP:ToInterfaceNamespace />
    - <SAP:OutboundBindingAttributes>
      <SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      </SAP:OutboundBindingAttributes>
    - <SAP:HeaderMapping>
      <SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      </SAP:HeaderMapping>
    - <SAP:ChannelEntry version="30">
      <SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">PE</SAP:AdapterName>
      <SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">00000000000000000000000000000000</SAP:AdapterSWCV>
      <SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">PE</SAP:AdapterEngineType>
      <SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:ChannelDirection xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:FromPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:FromPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:ToPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      <SAP:ToPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
    - <SAP:ChannelAttributes xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
      </SAP:ChannelAttributes>
      </SAP:ChannelEntry>
      </SAP:OutboundBindingEntry>
      </SAP:OutboundBinding>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <Trace level="1" type="B" name="CL_HTTP_PLAIN_INBOUND">
      <Trace level="1" type="T">server-protocol HTTP/1.1</Trace>
      <Trace level="1" type="T">content-type text/xml</Trace>
      <Trace level="1" type="T">user-agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; (R1 1.5); .NET CLR 1.1.4322)</Trace>
      <Trace level="1" type="T">host ermprot1:8000</Trace>
      <Trace level="1" type="T">content-length 605</Trace>
      <Trace level="1" type="T">remote-addr 172.30.18.12</Trace>
      </Trace>
      <Trace level="1" type="T">COMMIT is expected by application !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
      <Trace level="3" type="T">Getting type of XMB...</Trace>
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="2" type="T">XMB kind = CENTRAL</Trace>
      <Trace level="3" type="T">Start pipeline found</Trace>
      <Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
      <Trace level="3" type="T">No triggers found. OK.</Trace>
      </Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="3" type="T">system-ID = XID</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 4395AE1AA40F095FE1000000AC1E1BAF</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">QOS = EO</Trace>
      <Trace level="3" type="T">Message-GUID = 4395AE1AA40F095FE1000000AC1E1BAF</Trace>
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">Generate prefixed queue name</Trace>
      <Trace level="1" type="T">Queue name : XBTI0013</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0013</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="3" type="T">Setup qRFC Scheduler</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="3" type="T">Call qRFC .... MsgGuid = 4395AE1AA40F095FE1000000AC1E1BAF</Trace>
      <Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
      <Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
      <Trace level="3" type="T">OK.</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Version number = 000</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 001</Trace>
      <Trace level="3" type="T">Message version 000</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
      <Trace level="2" type="T">Increment log sequence to 001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = XID</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Start without given receiver</Trace>
      <Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
      <Trace level="2" type="T">...valid Receiver w/o Condition: - IPCUSTINTEGRATION</Trace>
      <Trace level="2" type="T">Number of Receivers:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) IPCUSTINTEGRATION MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="2" type="T">got property produced by receiver determination</Trace>
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTO0___0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 012</Trace>
      <Trace level="3" type="T">Message version 001</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 001</Trace>
      <Trace level="2" type="T">Increment log sequence to 002</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = XID</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping 7BEA36463E9E3DBB84AA84200BA6D1B2</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping 03B604901DFE11DAA5A8D8F2AC1E1BAF</Trace>
      <Trace level="1" type="T">Interface Mapping http://skunkworks.ordnancesurvey.com/integration IM_CUSTOMER_UPDATE_CONFIRMATION</Trace>
      <Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_CUSTOMER_UPDATE_CONFIRMATION_</Trace>
      <Trace level="3" type="T">Dynamic configuration is empty</Trace>
      <Trace level="2" type="T">Mode 0</Trace>
      <Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_CUSTOMER_UPDATE_CONFIRMATION_.</Trace>
      <Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_CUSTOMER_UPDATE_CONFIRMATION_</Trace>
      <Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_CUSTOMER_UPDATE_CONFIRMATION_ completed. (executeStep() of com.sap.xi.tf._MM_CUSTOMER_UPDATE_CONFIRMATION_</Trace>
      <Trace level="3" type="T">Dynamic configuration is empty</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
      <Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
      <Trace level="2" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
      <Trace level="2" type="T">-BS_CUSTOMER_DATA_TEAM</Trace>
      <Trace level="2" type="T">-IPCUSTINTEGRATION</Trace>
      <Trace level="2" type="T">http://skunkworks.ordnancesurvey.com/integration.MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE</Trace>
      <Trace level="2" type="T">create outbound binding for Process Engine</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
      <Trace level="1" type="Timestamp">2005-12-06T15:23:10Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS =</Trace>
      <Trace level="3" type="T">P_IFNAME =</Trace>
      <Trace level="3" type="T">P_METHOD =</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Channel for Process Engine: PE</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = PE</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_CALL_BPE</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
      <Trace level="3" type="T">determined process: WF task WS90100001</Trace>
      <Trace level="3" type="T">......extracting from header: ConversationId = ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: SenderParty = ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: SenderPartyAgency = ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: SenderPartyScheme = ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: SenderService = BS_CUSTOMER_DATA_TEAM ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: Interface = MI_CUSTOMERUPDATE_CONFIRMATION_RESPONSE ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">......extracting from header: InterfaceNamespace = http://skunkworks.ordnancesurvey.com/integration ,</Trace>
      <Trace level="2" type="T">......extracting values found: 1</Trace>
      <Trace level="3" type="T">created BPE proxy for message 4395AE1AA40F095FE1000000AC1E1BAF</Trace>
      <Trace level="3" type="T">inserted message into pipeline PE_ADAPTER</Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:11Z CET qRFC raised on XBQO$PE_WS90100001</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:11Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
      </Trace>
      <Trace level="3" type="T">Async processing: skip mapping of response</Trace>
      </Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Async processing completed OK.</Trace>
      <Trace level="3" type="T">system-ID = XID</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2005-12-06T15:23:11Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 003</Trace>
      <Trace level="3" type="T">Message version 002</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description />
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>

    Hi John,
    Pls check in SXI_CACHE to verify that the BPM(active in Integration Repository) has the latest version active on the ABAP stack.(I am saying this because you mentioned that a mapping step was missing..is it not..)
    go to SXI_CACHE --> Integration Processes(double click), in the list that you get verify that the return code is 0.
    Thanks & Regards,
    Renjith.

  • Error while trying to call a ABAP webdynpro appl. as a link on html form

    Hi,
      When I am trying to call a ABAP Webdynpro aplication as a link on html form. I get the following error
    Error when processing your request
    What has happened?
    The URL http:///sap/bc/webdynpro/form_ap/ (Path of ABAP webdynpro application) was not called due to an error.
    Note
    The following error text was processed in the system DRD : Error in Web Dynpro Runtime System
    The error occurred on the application server DRD_06 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_REQUEST_INPLUG_PARAMETERS of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP 
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DRD in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DRD_06 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server DRD_06 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 102 -u:  -l: E -s: DRD -i: DRD06 -w: 0 -d: 20081002 -t: 032939 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Any help will be greatly appreciated.
    Thanks
    RM

    RM,
    url clearly shows that it is unable to get host and port.check how you are building that url in html page
    Thanks
    Bala Duvvuri

  • Error while Installing the Java Add-In for an Existing ABAP System

    Hi all,
    I need help, i am Installing the Java Add-In for an Existing ABAP System
    SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
    These are the last few lines on the sapinst.log.
    INFO 2009-05-21 12:35:12
    Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:18
    Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:19
    Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc\tbx.
    INFO 2009-05-21 12:35:21
    Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
    INFO 2009-05-21 12:35:22
    Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    INFO 2009-05-21 12:35:23
    Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    FCO-00011  The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
    Thanks in advance for any help.
    Kiran Chebrolu

    Hi,
    Hope this note would solve your issue, please read carefully and validate with your issue
    Note 1032019 - Java Add-In: Error when you create the SCS instance
    below notes give your suffice information.
    Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
    Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
    Note 1025789 - RUNR3CMD generates CPF0006
    regards
    nag

  • SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

    Hi,
    I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
    I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
    Thanks,
    Poonam.

    Dear Poonam,
    the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
    Here's how to book your exam:
    Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
    Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
    Schedule the exam according to the rules of your region - here is the link for the US:
    [http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
    Regards,
    Klaus

Maybe you are looking for