SM59 Error in HTTP connections to ABAP Sytems

Hi All,
  My scenario is to connect to XI systems... I need to create a RFC destination (HTTP connections to ABAP Systems) in SM 59 with below details.....
Target host: xyz.abc.com
Service No. : 0000
Prefix path : /sap/xi/engine?type=entry
But SAP GUI is not accepting the character "?" ...
Can any one tell what can be done to avoid this error?

Hi,
it's only a warning -> just press 'Enter' key.
Regards
Patrick

Similar Messages

  • HTTP connection to ABAP Runtime failed : 403 : forbidden

    Hi all,
    I have configured a normal file to file scenario and when i test it in the TEST CONFIGURATION tool in intergration directory, am getting the error.
    HTTP connection to ABAP Runtime failed  
    403: forbidden
    user: PIDIRUSER
    Sugessions plzzz
    Regards
    Arun
    Message was edited by:
            Arunkumar sukumar

    Hi
    Try this
    note 517484
    1) Activated all services
    2) In Integration builder, receiver communication channel make sure you have entered proper
    host service number
    path = /sap/xi/enigne?type = receiver.
    3)Go to SU01 > type PIISUSER and reset the user's pw
    Check out this might be helpful
    http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
    1.Did you maintain Client, userid, password, and lang information in SICF transaction -> sap/xi/engine? Double click on service and check whether you have entered correct information.
    2.Then you might check the roles of the XIISUSER in SU01. In some case there are some double roles, i.e., two times the role SAP_XI_IS_SERV_USER assigned. One might have the date of the last update, the other one might have apparently the older version. Delete the older roles manually and the error should disappear.
    3.to send messages to xi you need a service id / pwd which is specific to your landscape usually its xiappluser. Contact your basis group for password.
    4.
    - Activated all services on the r3 system.
    - Create HTTP connection to XI from r3
    sm59-> http connetons to r3
    - let us say you have created a HTTP connection in the integrationserver_XI, make sure in its settings the prefix path is set to /sap/xi/engine?type=entry. Also check its log on credentials, you can use xiappluser.
    - IN Integration builder, receiver communication channel make sure you have entered proper
    host service number
    path = /sap/xi/enigne?type = receiver.
    5. can you also try the following;
    Visual Admin -> start the service,
    "com.sap.aii.af.ms.app".
    I don't know this Forum no fhats why i copied.
    Thanks

  • Error : HTTP Connection to ABAP Runtime failed

    Hi,
       i am working on xml to flatfile interface.when i am trying to test the scenario from ID - > Tools -> Test configuration option i am getting below error.
    Receiver Determination <Not found>
    Internal Error Http connection to ABAP runtime failed.
    Error : 403 for bidden.
    I have checked in Receiver determination its been configured properly.
    Is it any basis settings problem ?
    Thnx,
    Siva.

    Hi Siva,
    Check this links
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
    Regards
    Ramesh

  • HTTP connection to ABAP Runtime failed. Error: 403 Forbidden

    Hi ALL
    We where testing our scenario using the Test Configuration in Integration Engine.
    We have come across the following error in the second step of Determining the receiver.Here is the error message we received...
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: _http://SAPXDV01.sap.client1.local:8000/sap/xi/simulation?sap-client=150 User: PIDIRUSER
    Please, do let us know ... if you have received similar error & what solution can be applied...
    Your help is greatly appreciated!
    Thank you,
    Patrick

    Hi,
    Go through this thread...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0f00c890-0201-0010-beb2-c96050edc426
    JCO_COMMUNICATION_FAILURE
    Error in XI server: JCO_COMMUNICATION_FAILURE in Message Mapping
    This might help you..
    Regards,
    Divya

  • PI internal error : HTTP connection to ABAP Runtime failed

    Hi Experts,
    From last 3 days,I am geting a SAP PI internal error(PFA for the detail).for that error,previous sucessful scenario also not working.The error I am getting in the 'TEST CONFIGURATION' of the ID:(sometimes i am getting this error in ' Receiver Determination' and sometimes in 'interface determination & mapping')
    [ Receiver Determination
    <Not found>
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: Unexpected end of file from server URL: http://deveppi103:8002/sap/xi/simulation?sap-client=117 User: PIDIRUSER ]
    Please,suggest.
    Regards,
    Raj Tripathy

    Hi Raj,
    We had faced this issue a few days back and there was an entry missing in the table.
    This issue has been discussed on this forum multiple times:
    Prefix number: entry missing for system TST client
    workflow- Prefix number: entry missing for system xxx Client xxx
    Regards,
    Sanjeev.

  • HTTP connection to ABAP Error

    What is this error"HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://dst01pi:8001/sap/xi/simulation?sap-client=100 User: PIDIRUSER" ?

    Make sure user PIDIRUSER has role SAP_XI_ID_SERV_USER.
    U may try changing your service user password using SAP Note 721548.
    Regards,
    Prateek

  • HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL

    HI experts,
    I am tsting Test configuration in ID in Quality environment. I am getting below error for all interfaces.
    but same interfaces are working fine in Develoment environment.
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://abcdxi06.abcdk.abcpower.com.sg:8000/sap/xi/simulation?sap-client=300 User: PIDIRUSER.
    thanks
    Srinivas

    Similar problem discussed here:
    HTTP connection to ABAP Runtime failed : 403 : forbidden
    Error testing configuration: "HTTP connection failed"
    Check if the port is defined, as suggested in second link.
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Oct 1, 2009 1:27 PM

  • HTTP connection to ABAP runtime failed

    I am building a scenario where XI picks up a file from a directory and pushes an IDoc to ECC.  I have configured the interface with the Design tool, and I believe my setup in the Configuration tool are correct too, however I am encountering an error when testing the scenario by means of --
    Tools --> Test Configuration.
    The testing tool is giving me the following error upon processing the reciever determination:
    HTTP connection to ABAP Runtime failed.
    Error: 403 Forbidden
    URL: http://serveraddress:port/sap/xi/simulation?sap-client=100
    User: PIDIRUSER
    First of all, I am not sure who the PIDIRUSER is, I assume it's a system user?  Second, given that this error is a HTTP connection error, I am lead to believe that the issue lies somewhere in the RFC connection from XI -> ECC.  I am not sure why exactly it's attempting to connect via HTTP as my communication channel is using the IDoc adapter with an RFC destination to connect to ECC.  Possibly I have configured this incorrectly.  I have read about having to configure a RFC adapter when posting messages from R/3 to XI, does the same apply when posting an IDoc from XI to ECC?  Does anyone have any other thoughts as to why this error may be occuring?  Thanks in advance for your time and help.

    This might help you
    http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
    Regards
    Agasthuri Doss

  • How to solve Error in http connection. Error -1

    urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
    [j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
    [j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
    [j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
    [j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
    [j2mepolish] Generic/DefaultColorPhone: respCode=====-1
    [j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
    Why is this error coming? How to solve it?
    Thanks in advance.
    Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

    I am making a form using an interface. When Activate the Form, I got this error:
    Invalid HTTP connection: ADS
    Message no. FPRUN000
    But I do not know how to solve or config ADS. Any one know how to slove this error ?
    Thanks a lot.

  • Load balance for HTTP Connection to ABAP System (Type H) RFC connection

    Experts,
    For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
    My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
    Thanks in advance.
    Mahesh

    Hi Naga
    Could you check the link below?
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
    https://service.sap.com/sap/support/notes/1040325

  • HTTP Connection to ABAP System - Query String Not Allowed message

    Hi All,
    We are trying to create HTTP Connection to ABAP System on a SAP ECC system.
    Following entries are added
    1 Connection Type: H
    2 Target Host: Host name
    3 Service Number: HTTP Port name
    4 Path Prefix: /sap/XI/engine/?type=entry
    It is not allowing me to enter Path prefix as "/sap/XI/engine/?type=entry". It is throwing a warning message as "Query String Not Allowed message".
    As per the documentation it is mentioned that -<b> If the system displays the Query String Not Allowed message, you can ignore it.</b>
    It is not allowing me to save the entries succesfully . I need to remove the path refix entry then only i am able to save other wise it is not allowing me to proceed at all.
    Please let me know what entry i can put for the same or let me know how can i ignore and proceed by saving the path prefix as "/sap/XI/engine/?type=entry".
    Please provide your valuable help on this.
    Regards,
    Nanda

    Hi Aamir ,
    Thanks for the response.
    Tried both but still same issue .
    Any more inputs .
    Cheers,
    Nanda

  • Errors with HTTPS Connection to external server

    I am trying to establish a HTTPS connection to an external web site in transaction SM59,  but I get “ICM_HTTP_CONNECTION_FAILED” errors.  I get the same errors from a bespoke ABAP program.
    I know the request is getting to the web site, but the response is not getting back into SAP. 
    This is not firewall related.
    I have installed and configured the SAPCRYPTOLIB software for SSL support and entered the necessary instance profile parameters.
    I have configured STRUST.
    SM59 is setup for type G (HTTP Connection to Ext. Server) and port no. 8443
    I have started the HTTPS service in SMICM
    I have noticed an odd entry in the SCICM trace file,  but don’t know how to fix.
    <i>ERROR => Connection request from (-1/65535/0) to host: mms-sap.sapmms.com, service: 8000 failed (NIECONN_PENDING)</i>
    Does anyone have any suggestions?

    Thanks for your comments.
    I've tried everything in SM59. 
    SAP refers to both protocols as HTTP. 
    I think the error is with the response coming back into SAP.  SAP doesn't know what to do.  It might be DNS related or I might need to configure the ICM somewhere.  Oddly the response comes back into sap on port 8000 (which is HTTP).  It went out on port 8443 (which is HTTPS).

  • File To Proxy Error ICM HTTP CONNECTION FAILED

    Dear All ,
    Iam Doing File to Proxy Scenario.
    XML File is picked by XI Adapter is Properly and if i go and Check in SXMB_MONI,
    It is Showing Status is Scheduled for outbound processing and if i see in  Que Status  is stop with red symbal .If I Click on QueueID it is opening the inbound qRFC Monitoring ,there if click on Queue Name it is showing Status :SYSFAIL,If I Click on SYSFAIL it is Showing the XI Error CLIENT_RECIVE_FAILED.INTERNAL:Que Stop, If I Click on QueueName it is showing while Executing the Functiomodule SXMS_ASYNC_EXE It is having prob i thik showin Error Text :CLIENT_RECIVE_FAILED.INTERNAL:Que Stop,If I Click on Quename it is showing a program RSXMB_SELECT_MESSSAGES is Similar to our SXMB_MONI ,here it is showing the Status Falg Red ,If I Click on that message it is opening the pipeline steps , here while calling Adapter Showing red symbal  giving the Error Message ICM_HTTP_CONNECTION_FAILED
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Please help me its urgent.
    Regards
    Kumar

    hi
    This is the problem relleated to the HTTP connections, since using the proxy theXML travels to the destination, on your receiveing system make sure HTTP service are active.
    in R/3 run this report :SPROX_CHECK_HTTP_COMMUNICATION  you will get the error then proceed with the below steps to fix it.
    YOur HTTP seriveces on the R/3 have some problem.....
    Goto SMICM>goto>servicess you should see the HTTP service running with the ABAP port entry, if this is up then check
    SICF--->press f2 you should not have any proxy check there.....
    if these are fine then problem is with the Sproxy configuration........

  • Http connection to ABAP problem

    Hey Gurus,
    I have a problem with the configuration of a http connection to an ABAP system (type H ). Due to the PI Development Book I shall set up a connection called "XI_Integrationserver".
    The target host is: saptest8 , port 50000.
    The path prefix is: /sap/xi/engine/?type=entry
    client
    user: PIAPPLUSER
    When I test the connection I get an 404 (Not found) error. But it should be an 500 (internal server error). In transaction SICF the engine is started. I don't know how to solve this problem. Please help me!
    I'm using PI 7.01!!!
    Thanks for any reply.

    Hi,
    the name does not matter, but "XI_Integrationserver" is missleading because the target is an application system, better would be "INTEGR_ENG_SAPTEST8"
    Assumedly the port is wrong. Did you put the port of the ABAP WAS? Transaction SMICM / GoTo / Services
    Regards,
    Udo

  • Class not found error over HTTPS connection

    Problem: Facing problem in downloading signed JAR file over HTTPS connection.
    While downloading the jar file over a https connection, i get a certificate with following message
    " Do you want to accept the certificate from web site <server name> for the purpose of exchanging encrypted information? "
    If i accept the ceritificate immediately without any delay, all goes fine. The jar file gets downloaded and the applet runs withoput any problem. But if we accept the certificate after some delay say after one or two minutes i get "Class not found error"
    Has anybody come across any such issue ?
    Thanks in advance.
    Rohit

    I got the same error. I believe the ssl connection has a short timeout.
    But I don't think this is a bug because there is no sense in letting a ssl connection open in the initial state before accepting the server's certificate.

Maybe you are looking for