HTTP Get healthprobe with AD user authentication

Hi,
I'm throwing this one out there to the ACE module Load-balancing experts!
how do I configure a request method get url for google.co.uk so that it authenticates a healthprobe AD user with a Bluecoat proxy appliance?
The objective here is to have a probe run a http get to google to test our bluecoat proxy appliance and then failover to another real server (or bluecoat appliance)
Thanks

Hi Matthew,
This would partially depend on the authentication type defined on your Bluecoat proxy.
For most of the setups, it should be enough to configure the credentials to be used under the probe parameters with the "(config-probe-http)# credentials " command.
If this doesn't work, you may also try inserting an authentication header inside the request. Again configured under the probe parameters.
For more details on the available options, please refer to http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/probe.html#wp1031398
Regards
Daniel

Similar Messages

Need help with external user authentication

Hello,
I need some help to set up an external user authentication in Oracle DB 10g. Using the documentation at
http://www.oracle-base.com/articles/misc/OsAuthentication.php
I added the user alex to my linux system and checked the parameter os_authent_prefix:
SQL> show parameter os_authent_prefix
NAME TYPE VALUE
os_authent_prefix string ops$
SQL>
I created the oracle user alex using
CREATE USER alex IDENTIFIED EXTERNALLY;
as well as
CREATE USER ops$alex IDENTIFIED EXTERNALLY;
The parameters in the sqlnet.ora are set to
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES = (ALL)
Being the local user alex on the linux server I can login:
$ sqlplus /
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Aug 30 08:56:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
SQL>
Now using a Windows Client:
C:\>sqlplus alex@<netservicename>
SQL*Plus: Release 10.2.0.1.0 - Production on Di Aug 30 10:31:37 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Kennwort eingeben:
ERROR:
ORA-01017: invalid username/password; logon denied
- So, what's wrong?
- Do I always have to create oracle users with the prefix "ops$" to the local username? How do these users login - with or without the prefix 'ops$'?
- I read that kerberos authentication is only available through oracle advanced security addon. What about authentication through ldap?

Obviously it doesn't work from any remote system.
For this to happen the parameter remote_os_authent would have been set to true.
Warning: this poses a security risk.
As far as I know you should have been logged in as alex on the client, and using sqlplus /
However, from 10g onwards Oracle comes with Oracle Wallet, which stores the password encrypted outside the database in a file, called wallet, and which is accessible from anywhere.
You would better use that.
Sybrand Bakker
Senior Oracle DBA

Order not getting saved with RFC user

Hi CRM experts,
We have custom report to update payment card details in CRM order. For an error order when I try to update the card details in CRM it successfully deactivates the "Contains Error(I1030)" status and saves the order.
Whereas the same error order when I try to update the card details through external system, the user is RFC user, the program does not deactivates the status I1030 and the order gets saved with error.
Initially I thought it is an authorization issue with RFC user, so I tried applying SAP_ALL access to RFC user but it did not work.
Kindly suggest the possible solution.
Thanks in advance
Meenu.

Hi Meenu,
The standard one order framework works in such a way that when any changes to any object like PARTNER , HEADER , ITEMS , CARDS etc take place, then after changes done, the system checks for any inconsistency for that particular object and displays error messages accordingly.
At the next change, the check runs again and the messages are removed. The checks are run through the standard event framework of BEFORE and AFTER. So in case the error messages are not getting removed, it means that these events are not getting triggered properly. I think that you are using individual FM for changing the details which could be something like CRM*CARD*MAINTAIN*OW*, you can try using CRM_ORDER_MAINTAIN, as this FM triggers all events correctly.
/Hasan

Can you make a HTTP GET request with JSC form element?

It seems the form element in JSC make a HTTP POST request by default, but is it possible to make a HTTP GET request by the form element in JSC?
(It is worth to mention here that HTTP GET request has its distinctive advantages like you can embed the parameters in a URL and bookmark it)
Thank you very much.

Jim,
I am doing the sameway as you suggested to MISS_DUKE
But have you face any problems in doing so? In otherwords its the page rendering correctly?
On requesting the same page multiple times, Every time I get the page that was rendered for the first time.
To see the correct results, I need to close the browser and check it .
see my previous queries here
http://swforum.sun.com/jive/thread.jspa?threadID=54379&messageID=208223#208223
http://swforum.sun.com/jive/thread.jspa?threadID=56440&messageID=214302#214302
http://swforum.sun.com/jive/thread.jspa?threadID=56676&messageID=214987#214987
http://swforum.sun.com/jive/thread.jspa?threadID=56390&messageID=214139#214139
And I am still expecting the answer from experts. But nobody turn arround
Thanks,
Sudhakar

How to use https inside flex with 2-way authentication

I've got a Flex app which provides a front-end for doing basic CRUD db operations. The app is served up from a Tomcat/Blaze server using 2-way authentication and uses Java objects to do the server-side db work. Serving the app works fine. The problem arises when the data components in the app try to call back to the server to pull data from the db. The HttpService template needs to be https://... but the call cannot complete because Flex does not provide a certificate to the server as the browser does.
Using http://... works fine but then the db data is sent in the clear (which is very bad).
What is the standard way to solve this problem? Is there a way to get Flex to use the same cert that the browser provided?
Thanks for any assistance!
[ RHEL5, Apache Tomcat 5.5.23, JDK 1.5, IE/Firefox browsers]

Nitin,
Kindly go through the below links ...
http://help.sap.com/saphelp_nw04/helpdata/en/1f/7e2441509fa831e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Also, make a search on the SDN as this question has been answered many a times on the forum.
Regards,
Neetesh

"User authentication failed" when connecting with Visual Administrator

Hello,
I am having trouble making a connection to my local J2EE Engine using the Visual Administrator (VA).
I open the VA interface and create a new connection. The default User Name is "Administrator". I put in "localhost" for host, "50004" for port and leave the Transport Layer selection to "Default".
When I try to connect this way I get the following message:
User authentication failed
Next I went into Start|Settings|Control Panel|Users and Passwords and saw that there were several ids created by the Developer Workplace (DW) installation. The ids that I see are: j2eadm,sapadmin,sapinstall and SAPServiceJ2E
I checked all of them to see what groups they're members of and they're all at least members of "Administrators" group.
There are also 3 new groups that must have been created by the DW installation: SAP_J2E_GlobalAdmin, SAP_J2E_LocalAdmin and SAP_LocalAdmin.
The j2eadm id belonged to all 3 new sap groups so I changed its password to something I'd remember and then changed the connection to use that login.
When I tried to connect thru VA using this id and the new password I still get the "User authentication failed" error message.
Can anyone please tell me what I'm doing wrong?
Thanks in advance for any help.
David.

Hi,
During the installation the SAPINST asks for a Administrator Password.. This password is very important.
We had kept same passwords for all userids to start with.
This helped reduce lot of confusion.
Warning: if you enter the wrong password 5 times, the userid 'Administrator' gets locked.
However there is an Emergency password recovery procedures.
Try this link
http://help.sap.com/saphelp_erp2004/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
Hope that helps
Regards,
Siddhesh

Function Module used for user Authentication in B2B webshop

Hi Gurus,
Can someone please help me in finding a Function module which is getting called for the user authentication in B2B webshop and where can i find this class file which is getting called in the NWDS?
Thanks
Saurabh

Depending upon if you are coming from Portal (SSO) or B2B logon screen, one of the following function modules is called to authenticate authorize the B2B application usage.
CRM_ISA_IUSER_LOGIN
CRM_ISA_LOGIN_CHECKS
Easwar Ram
http://www.parxlns.com

User authentication issues when auth by external radius server

We tend to use FF in a corporate environment to manage our networking devices (firewalls/switches/routers etc). Came across a bizarre problem under the following conditions:
ZyXEL Network Switch (GS2200-24) uses external authentication (RADIUS) to allow management and accounting of who makes changes.
When logging into the switch with FF, we get repeated prompts for user authentication. Eventually the user is logged in (and no it's not a typo!). Looking through the dev console in the beta, it seems to get a 401 unauthorised back from the switch once it tries to load another html file.
The browser *should* be presenting the same credentials to each called page within the site, it doesn't seem to :-(
No site added as it's an internal IP address....

We tend to use FF in a corporate environment to manage our networking devices (firewalls/switches/routers etc). Came across a bizarre problem under the following conditions:
ZyXEL Network Switch (GS2200-24) uses external authentication (RADIUS) to allow management and accounting of who makes changes.
When logging into the switch with FF, we get repeated prompts for user authentication. Eventually the user is logged in (and no it's not a typo!). Looking through the dev console in the beta, it seems to get a 401 unauthorised back from the switch once it tries to load another html file.
The browser *should* be presenting the same credentials to each called page within the site, it doesn't seem to :-(
No site added as it's an internal IP address....

Locks getting created with lock owner field ##

Hi
We are using ECC 6.0 system. We are facing a typical pronblem. Locks are getting created with ## in the user name field. Because of which updates are not happening. I solved this problenm by applying note 857439 but the problem again occurs after some days (That is locks getting created with ## in user name field)
Can anybody help me solving this problem permanently
Thanks in advance

There's not enough details to get a good understanding of your scenario, but it sounds like you're using some kind of date control to retrieve the date value and pass it to the report's parameter field at runtime. If this is correct, it sounds like the format of the date value from the control may not be what the report is expecting. To debug, I would first use hardcoded values when you set the report parameter fields to see what works. Then compare that to what the return value is from the control to see if they match. I suspect the formats differ. I did a quick search on the BOBJ kbase and found a couple of articles that may help you. I recommend searching as there are lots of information on how to set parameter fields at runtime. <a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010247&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010247</a><a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010251&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010251</a>-MJ

Reason 413: User Authentication Failed

Hi, I have not used my VPN connection for quite some time but when I did recently try and log on again I get the box to enter in my user name and password, I proceed to enter it, then the box pops up again, I enter it again, and then it pops up a third time, and I enter it a third time. Finally I get a Reason 413: User Authentication Failed message box and I never can connect. Does this sound like a problem with my actual user name and/or password, or could it be something else? I am using Windows8. Thanks

The actual reson of failure can be seen on the external authentication server. If you have a radius server, please go and check what error message are you getting there.
Could be dial-in issue, max-number of session, wrong password, acount locked-out etc
Also let us know what radius are you using?
Jatin Katyal
- Do rate helpful posts -

"Remote Apple Events" User Authentication failure

I will send some Remote Apple-Events from a local machine to a remote Mac Mini (OS X Server 10.5.4) with "eppc://admin:[email protected]". But i get the error message "User Authentication failure -927".
Mounting the remote Volume is no problem with the same user and password strings "afp://admin:[email protected]" so i think that the user and passwort is correct.
I have reset the Keychains and have no further ideas. Any hints?

Have you checked that the account you're using is allowed to send AppleEvents?
(System Preferences -> Sharing -> Remote Apple Events)
I set the access for AppleEvents for all Users on the local machine as well on the remote server. Send AppleEvents from server to the local machine seems working.
Are there special settings on OS X Server for user privileges in the "Workgroup Manager", i'm not very skilled with UID and GID?

OSB proxy for HTTP GET servlet

Hello,
I need to create a proxy in OSB that will accept HTTP/GET requests (with ?param1=value1&param2=value2.... parameters).
My goal is simply to forward this request to another servlet in J2EE instance that will actually serve the request and send back to OSB the text/xml response.
Can you please point me to the correct proxy and business service configuration for this?
Our SOA version is 10.3.6 and we have OSB and J2EE servers in our domain.
Thanks
Edited by: 995036 on May 31, 2013 4:19 AM
Edited by: 995036 on May 31, 2013 4:20 AM

Hello again,
I found the solution so I will share it with you in case someones needs it the future.
I created a business service with Service Type "Messaging service", request message type "none", response message type "text" and Http transport "GET".
I created a proxy service with Service Type "Messaging service", request message type "text", response message type "text". I created a routing node my flow directed to the business service mentioned above. In the routing pipeline request i put the following actions:
1) Assign:
Expression $inbound/ctx:transport/ctx:request/http:query-string/text()
variable queryString
to assign the inbound query string in a variable
2)Insert
expr: fn-bea:inlinedXML('<http:query-string xmlns:http="http://www.bea.com/wli/sb/transports/http"></http:query-string>')
location: as first child
Xpath: ./ctx:transport/ctx:request
in variable: outbound
3)insert
expr: $queryString (created in step 1)
location: as first child
Xpath: ./ctx:transport/ctx:request/http:query-string
in variable: outbound
Now the query string should be redirected properly to your business service/ GET servlet.
George

Developer partner is getting replaced with Current processor

Hi Experts
I have an issue with my Charm Partner function .In my flow whenever the status is got changed to " In Developement" and Developer partner function which is changeable field is getting replaced with my User id (Current processor)
i have checked the thread Partners getting replaced by Current processor in ChaRM and as per that i removed current processor partner function in partner determination procedure for my txn type. But issues is still same
Also AIC_ASSIGN_PROCESSOR = NONE this parameter was already set as None in that table
Also i have tried making the developer field as Non Changeable and it is throwing error while saving mutiple developer names entered and it works if i remvoe my name(current processor) as developer so there also it is taking current processor
Please help me to solve this issue
Regards,
Saravana

Hello
we have the same issue here. We also have the partnerfunctions "Current processor", "Tester" and "Developer" in the "partner functions" oft the transaction. And we want to keep all of them.
Addittionally i have set AIC_ASSIGN_PROCESSOR = AUTO_POPUP_NO2EDIT, which asks the User that switches to Edit-Mode, if he want's to become current Processor. That is our desired behaviour.
Current Processor functionality customizing settings coming with SP5
But we still have the Problem that the other Partnerfunctions get overwritten depending on Status.
Switching to "in Development" overwrites the Partnerfunction "Developer" without question.
Switching to "to be tested" overwrites the Tester.
We want to keep those Partnerfunctions as they were manually filled.
Any Idea's ?
Regards
Rolf

CSM 3.1 local user authentication problem

Hi every one.i have strange problem with local user authentication.in our csm i have configured csm to auhenticate users using TACACS+ from our acs server which every thing is ok about this configurtion but also i have configured fall back authentication for user admin.here is the problem even when connection to ACS server is ok and server can send authentication requests to ACS we can authenticate with ACS and Local admin which i think this is wrong because using local admin is configured as fallback.so what do you think about this problem which CSM authenticates users with ACS and local database same time??

You probably need to go under the system context and create the interface and also allocate vlans to it in CSM before you configure the context itself.
I hope it helps.
PK

User Authentication Failed via http BUT not with Visual Administrator !!?

OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
 security.3.log
 #1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#
 server.0.log
 #1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#
 I tried to connect http://host:port/sld same problem User Authentication Failed
Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?
Thanks in advance
Yves

Hi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves

HTTP Get healthprobe with AD user authentication

Similar Messages

Maybe you are looking for