HTTP_POST call error
Hello.
I developed report program using FM 'HTTP_POST' to parse html page, and it works well on foreground.
But it doesn't work on background.
So I changed rfc destination from SAPHTTP to SAPHTTPA. But it still doesn't work on background. Error message on log is "Connection to
"http://~~~~~~" failed."
In tcode sm59, configuration of SAPHTTPA was correct. It starts saphttp.exe on application server(not frontend). Test connection was also succeed.
So I executed saphttp.exe on application server directly, and got a message "RFC Accept failed".
How can I fix this? I need some help~~
ps. system version is 40B(too old), so it doesn't support ABAP OBJECT..can't use http_client class
Hi,
Pls chk the RFC Connection & settings ?
Regards
CSM Reddy
Similar Messages
-
Cannot turn on iphone cellular calls error
When trying to activate iPhone Cellular Calls, I get the error "cannot turn on iphone cellular calls error, FaceTime and iCloud must be signed in to the same Apple ID to use iPhone cellular calls" I am signed onto the same accounts in both places and cannot figure out what is wrong. Any help would be appreciated! Thank you
If you're trying to make calls from a mac, then you should make sure to enable FaceTime calls from your AppleID (email address) on both the mac and the iPhone. Don't uncheck your phone number, either. FaceTIme should be enabled on both devices with both your phone number and your AppleID.
For some reason, this is what had to be done for me to be able to make phone calls from my mac without receiving this message on my iPhone. I know it isn't ideal because we shouldn't have to enable FaceTime calls via AppleID, especially if we won't be using it with our AppleID, but this is what worked for me. Once you enable FaceTime calling from your AppleID on both the iPhone and your mac (while also keeping the calling enabled via your phone number), then try to turn on iPhone cellular calling on your iPhone. It should work, and then you can try to make a cellular call on your mac.
Some people may think that this isn't a fix because they might think I am talking about FaceTime audio calls. But I'm not. Try this and report back if you can. -
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
Internal error - NUMBER_GET_NEXT call error while craeating new company address
Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
AjayDear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa -
Ecatt script fails due "Error in OLE API method Call" error
Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN. -
*ERROR IN OLE CALL - METHOD CALL ERROR...*
HI ..
When trying to Upload a file using BDC with Vista OS, we are getting the following error..
ERROR IN OLE CALL - METHOD CALL ERROR...
There is no problem with BDC as its working fine with XP & other OS.
Pls help!!Seems that you are working with microsoft files.
Maybe you are using deprecated functions like WS_EXCEL -
Calling error/application logs in CRM inbound proxy
Hi All,
In inbound proxy of CRM, I have to call Error/Application logs (for eg:SLG1) whenever an integration process throws some error. Has anyone worked on this kind of scenario to call different application logs in CRM or R3 side inbound proxy.
If so, please give some ideas on this.
Thanks
DenoHi Deno,
did you have a look at my blog in which I describe it ?
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
Regards,
michal -
Problem with call error / call restart
If during a call with the Bluetooth car speakerphone on and - due to loss of signal, or anything else - I get a call error, in the lock screen there is a message of error with black color font and (!) icon, and until there is nothing strange, right? But next, if I try to unlock the iPhone the lost call restart automatically even if I would not to do it..
Is there anyone with such a problem? Any solutions?I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu -
Got minus one from a read call error in ORACLE 11gr2 RAC
dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once again842949 wrote:
dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once againI am sorry to see that COPY & PASTE are broken for you.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
Handle: 842949
Status Level: Newbie
Registered: Mar 9, 2011
Total Posts: 7
Total Questions: 4 (4 unresolved)
so many questions & without ANY answers.
http://forums.oracle.com/forums/ann.jspa?annID=718
Edited by: sb92075 on Jun 22, 2011 9:45 PM -
Dear experts,
can anybody give me a hint about the error mentioned above?
I found the SAP Note 1049778 but this is not applicable. Yes, we do have this error in some workprocess trace-files and it seems to be produced during printing SAPScript. But it has nothing to do with special print options. I'm now looking for other ideas about the real cause of error.
Regards,
Hans-MartinWell, here are the relevant lines of the trace dev_w1 of the related work process:
S
S Tue Aug 12 09:46:26 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:27 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:33 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:37 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:39 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:44 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:57 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:58 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:47:00 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
Hope this helps.
Regards The specified item was not found. -
Query regarding Call errors in webview
We are running on UCCE 8.x comprehensive setup. On an average in a week we get around 20 call errors in the webview report. Also, I had read a Cisco document stating different scenarios for call errors. I would like to know what will happen to a particular call if it is incomplete, etc and how to minimize the call error by providing high customer satisfaction
Regards,
DassHi Bhargav,
Do one thing just check in tcode - SE01
and enter your TR No. in first tab..
Now in the TR expand and double click on the task no.
Here you will get list of objects to be transported to with this TR..
Just whether you TR includes entry for your screen
<b> OR</b>
Incldue R3T3 PROG <UR_PROG_NAME>
If both the case is not application...then the screen has slipped from the TR and has to be transported in separate request..
Just check TR and let me known ...based on ur response we can move ahead..
Enjoy SAP.
Pankaj Singh -
I keep getting something called error 50 when I am trying to buy some music
I need help regarding somethibg called error 50. I is stoping me buying music from itunes
Check this Apple document out -> iTunes Store: "Error (-50)" when downloading purchased content
Try reconfiguring the security software on your computer.
You will need to configure the software to allow the following domains to send and receive data from the Internet.
itunes.apple.com
ax.itunes.apple.com
albert.apple.com
gs.apple.com -
Pure virtual function call error while saving the vi.
Hi everybody,
I'm using LabVIEW 8.6 to create the applications. I got "fatal error: memorymanager.cpp: line 437 and Pure virtual function call error: R6025, while i try to save the vi. Also no DAQ cards are interfaced with my PC.
How can i rectify this error?
Solved!
Go to Solution.Hi solutions,
the simplest solution would be to recreate the VI from scratch. Yes, really!
You can also try to copy the block diagram to a new VI, this might help too. Or to clean up your VI be creating subVIs…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Python sapnwrfc FUNCTION CALL ERROR
Hi everyone,
I am trying an external rfc connection with sapnwrfc-0.05 for Python. I have the latest nwrfcsdk from SAP. It took me a while to figure out the new python module methods, but I am now able to connect successfuly.
I have a function module that I need to call and feed external data to it. This function is writing to a Z table of mine. I have done this successfuly with previous versions of python sapnwrfc module.
Here is my test code:
import sapnwrfc
conn = sapnwrfc.base.rfc_connect({'ashost':'HOSTNAME', 'sysnr':'00', 'client':'900', 'user':'RFCUSER', 'passwd':'PASSWORD' })
if conn :
print "I am connected"
# VBELN = CHAR
# LNUMB = NUMC
# WERKS = CHAR
# GJAHR = NUMC
# HEAT = NUMC
# ZIERA = CHAR
# ZLENG = CHAR
# ZWEIG = CHAR
# ZINDX = CHAR
# ZPDA = CHAR
# ZTIME = CHAR
data = [VBELN+LNUMB+WERKS+GJAHR+HEAT+ZIERA+ZLENG+ZWEIG+ZINDX+ZPDA+ZTIME]
iface = conn.discover("MY_Z_FUNCTION_MODULE")
f = iface.create_function_call()
# MY_Z_FUNCTION_MODULE has a TABLE structure DATA
f.DATA(data)
f.invoke()
print "Done"
conn.close()
When I run this code I get the following ERROR:
File "/usr/lib/python2.4/site-packages/sapnwrfc/__init__.py", line 165, in invoke
return self.handle.invoke()
sapnwrfc.RFCCommunicationError: RFC FUNCTION CALL ERROR: set_table_line invalid Input value type
The same function module was working before, when called with DATA as a single string item in a list.
Any help?
Thank you all.
MenelaosAs I discovered, you need to supply the DATA table structure with a dictionary of its field values:
data = [{'VBELN':VBELN,
'LNUMB':LNUMB,
'WERKS':WERKS,
'GJAHR':GJAHR,
'HEAT':HEAT,
'ZIERA':ZIERA,
'ZLENG':ZLENG,
'ZWEIG':ZWEIG,
'ZINDX':ZINDX,
'ZPDA':ZPDA,
'ZTIME':ZTIME}]
Just make sure that each field has the correct size. The data types in the dictionary should all be strings, but the string contents should match the field types of the DATA table structure....
This is really an improvement over the old method (single string) but some documentation would be helpfull Piers!
Can I help?
Menelaos Maglis
Edited by: Menelaos Maglis on Jul 25, 2008 10:49 AM
A correction on the data field types. -
Please help me Solve Bad Pool Caller Error (Windows 8)
I'm repeatedly getting "Bad Pool Caller Error" on my Windows 8 PC causing it restart again and again. Tried all I knew, nothing worked. However, I'm able to use the PC in Safe Mode (right now I'm on it). Here is the link to dump files (zipped),
-https://onedrive.live.com/?cid=574E051B8481CE34&id=574E051B8481CE34%21231
Thank you in advance,
Anup MehraAM
For starters you need to update to win 8.1 ASAP and you need to either remove or update your PGP (Related to PGPsdk.sys PGP Software Development Kit NT Driver from PGP Corporation.) which is dated 2005 and can not possibly work in win 8.
Then please run driver verifier to find the under lying issue
These crashes were related to memory corruption (probably caused by a driver).
Please run these two tests to verify your memory and find which driver is causing the problem. Please run verifier first
If you are over-clocking anything reset to default before running these tests.
In other words STOP!!!
If you do not know what this means you probably are not
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Wanikiya and Dyami--Team Zigzag
Maybe you are looking for
-
Hi, For a few inbound interfaces for which PI is the middleware, we have found that the messages are stuck in queue in PI. We have also found that the messages are stuck in the queue in PI because one message which has an RFC error (It does a RFC loo
-
Runtime Error when launching itunes after install
I downloaded and install itunes. When I attempt to open itunes I receive the following Runtime error message: The application has requested the Runtime to terminate in an unusual way. Help....
-
Maintainence of views for product catalog
Hi Everyone, I have a requirement where i need to assign products to views. For Ex. If i have 10 products and 2views...The views wil be available when i run a transaction. If i click on any one of the views it wil take me to a screen where we can se
-
Acrobat won't download to mac?
I just downloaded Acrobat Pro and it says it won't open to Macs. WHAT?! How do I solved this, I already paid for a month. Nice they don't mention this until after you buy the product. Any advice would be helpful.
-
Hi, I am trying to activate an activity related to a CAF project, but when i try it, i got these errors: - No prefix found for development component - No prefix found for table file Ok what i´ve done so far: 1 - SLD - created a new name prefix, and s