Http proxy setting for webservice client.

Hi !
I have set the following option for accessing the webservice through the proxy(webservice
outside the firewall).
I'm using weblogic v7.0 with sp1.
-Dweblogic.webservice.transport.http.proxy.host=xxxx
-Dweblogic.webservice.transport.http.proxy.port=8088
It works fine and my soap client is able to access the webservice lying outside
the firewall.
But when I use the same setting, the soap client fails for accessing the webservice
which are
inside the firewall.
I get "Connection refused".
Is there any option to specify not to use proxy for specific hosts and ports ?
For example http.nonProxyHost
Any pointers will be of great help.
Thanks
Kumar Raj

I have not worked in SoA server, but since it uses weblogic server underlying (I assume), you can try setting the -Dhttp.proxyHost , -Dhttp.proxyPort system properties ( https for secured URL's) to WLS to specify the proxy details. Also the product might not have the capability to pass user credentials for authentication at the proxy. The version of OSB we are using had this problem. To overcome this you might require to add the URL to the proxy free list in your proxy server. This prevents the proxy from prompting for the user name when you access that URL.

Similar Messages

HTTP Proxy setting for SOA server

Hi,
my intention is to enable SOA Server to connect through HTTP Proxy to external services. This occurred when I am trying to connect to Yahoo Mail Server, via User Messaging Service but it keep throwing connection time out. One of the possible solution is to make the service to connect via the HTTP Proxy server in our network.
There are no mention of how to setup HTTP Proxy connection for UMS, as well as SOA Server in any documents.
Please advice or direct me to the relevant solutions.
Appreciate any help rendered :)
yee thian

I have not worked in SoA server, but since it uses weblogic server underlying (I assume), you can try setting the -Dhttp.proxyHost , -Dhttp.proxyPort system properties ( https for secured URL's) to WLS to specify the proxy details. Also the product might not have the capability to pass user credentials for authentication at the proxy. The version of OSB we are using had this problem. To overcome this you might require to add the URL to the proxy free list in your proxy server. This prevents the proxy from prompting for the user name when you access that URL.

HTTP Proxy Connection for sharepoint-webservice endpoint in SMP

hi all,
I want to consume share-point services(soap based) through SMP. for that i am creating HTTP Proxy Connection for sharepoint web service endpoint in
SMP. i have done with creation of proxy connection without any error but while testing (on REST_CLIENT add-ons) it showing following error :
Status Code: 400 <?xml version="1.0" encoding="utf-8"?> <error ><message xml:lang="en">Error occurred while connecting to the Gatewaynull</message> </error>
Can anyone help me....
Thanks in advance.

hii Andrew,
Here are screenshots of proxy connection configuration,
security configuration:
Application creation:
connection white listing :
Error message in Rest Client:
Regards,
SupriyaD

OSB: HTTP digest authentication for WebServices

Hi,
How do I configure HTTP digest authentication for WebServices offered by the OSB (Proxy Services with WS as transport)?
Best regards
Dimo

Did you figure out how to do it.?

NLS_LANG setting for a client with multiple Oracle servers

Hello!
We have a web application which has to connect to one of the Oracle servers with different charactersets. When the NLS_LANG on the client is a single byte encoding and the server has a single byte encoding there are no problems. We have now a server with NLS_CHARACTERSET UTF8 and all special (hungarian accented) character are replaced.
When we set the client to UTF8 the rest of servers does not work.
What is the solution for one client and multiple servers with different encoding?
Is there a special key in connection string?
I tried to change the nls_lang with an alter session statement but without success.
Regards,
emeriqus

NLS_LANG is not depending on the database side, it's a CLIENT setting to "let Oracle know what encoding is used on the CLIENT" so that Oracle can do the conversion from the client encoding to the database (NLS_CHARACTERSET) encoding.
for ONE application/client the is only ONE correct NLS_LANG value, regardless of the database NLS_CHARACTERSET
If you web application is really an UTF8 application (check with your vendor) then you can perfectly use a UTF8 client setting and a 8 bit database
Of course, you will be limited to the database side in this case seen the 8 bit characterset does not know all the characters in UTF8
The fact that setting the NLS_LANG to UTF8 "does not work" with your web application is simply the fact your application is not a UTF8 env.
Setting nls_lang to UTF8 will not "magically" make your application UTF8, NLS_LANG is depending on the encoding used in the web server.
But the first thing to ask yourself is if CURRENT data is correctly in the Oracle database.
use SQLdeveloper to check the data, this is a "know good client" that needs no NLS configuration.
You can download it from http://www.oracle.com/technology/products/database/sql_developer/
If the data is displayed correctly in SQLdeveloper then you are sure it's correct in the database.
If data is WRONG in the database then that needs to be corrected first, "trying" different client side configurations will only make matter worse (even if they make the data "look good" )
Regards,
Gunther
Client side notes on mentalink:
Note:158577.1> NLS_LANG Explained (How does Client-Server Character Conversion Work?)
1.2 What is this NLS_LANG thing anyway?
3.2 A detailed example of a wrong nls setup to understand what's going on.
4.2 How can I Check the Client's NLS_LANG Setting?
5.1 My windows sqlplus is not showing all my extended characters.
Note:179133.1> The correct NLS_LANG in a Windows Environment
Note:264157.1> The correct NLS_LANG setting in Unix Environments
Note:229786.1> NLS_LANG and webservers explained.
Note 115001.1> NLS_LANG Client Settings and JDBC Drivers
When using Unicode start here:
Note:788156.1> AL32UTF8 / UTF8 (Unicode) Database Character Set Implications
Setting NLs parameters: <Note:241047.1> The Priority of NLS Parameters Explained.

JRE ignores proxy setting for connections to non-standard web ports

Hi,
I've noticed that JRE would not use the proxy settings if the application tries to connect to a web address on a non standard http port. If port 80, 443, 8080 etc is used, the proxy is used but if it's something like 32938 it's not. Is there anyway to disable this behaviour and just have the proxy used for all HTTP traffic, regardless of destination port. Below a trace snippet that shows the behaviour.
guistyle/1049 (signed jarfile)
Browser Java version 1.7.0_67
in Explorer 5 +
on NT-based Windows
network: Connecting https://www.123.com/guistyle/*JEMSEC11424340585918 with proxy=HTTP @ /10.10.12.11:3128
Using port: 43856
network: Connecting http://www.123.com:43856/ with proxy=DIRECT
Socket connection failed: java.net.ConnectException: Connection timed out: connect
Attempting tunneled connection
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
Receive failed
Unable to make TCP/IP connection
End guistyle (startup failed)
basic: Applet initialized
basic: Starting applet
basic: completed perf rollup
basic: Applet made visible
basic: Applet started
basic: Told clients applet is started

Hi,
I still get the same error:
[12/Nov/2007:14:34:50] failure (16473) rsdts.mycomp.com: for host i78473.mycomp.com trying to GET http:/lidip/, service-http reports: HTTP7765: error reading response header (Server closed connection)
And:
Bad Gateway
Processing of this request was delegated to a server that is not functioning properly.
I don't get any logs on the other side...

HTTP Proxy settings for WIFI

I am trying to access the wifi at work which requires me to use a http proxy.
I can connect to the network in my company from my PC without any issues by giving the url in the lan settings
When I open the browser it asks for the user id and password and once I authenticate it allows me internet access
However I am having trouble mapping this into the iphone I realise I have two options i.e manual and auto
Can someone help me map these settings or direct me to a forum where some has done this successfully
Thanks.

Your post is not going to be seen by the Apple Engineers. This is a users forum. You should contact Apple Technical Services directly.
There is a new version of Apple Configuration Utility that just came out in the last two weeks. Manually setting the proxy settings isn't really very hard to do so I'm not sure what the concern is.

Automatic Proxy Failover for Extend Client Connections

Hi
I looked at the documentation but this is a still unclear to me. We have a C++ application doing continuous puts/putAlls on a Coherence cluster through a set of storage disabled Proxy nodes. (I am guessing this is referred to as 'active' client?)
Clients:
Multiple C++ processes doing puts and putAlls via multiple proxy nodes
Proxies:
6 nodes acting purely as proxies without storage
Servers:
6 Storage nodes
Each client has the addresses of all proxy nodes and ports. We are running a failover test where we kill a proxy node and see if the client fails over to next proxy that is alive. From what we see, this is not happening. Can someone explain what happens when a proxy server fails? I read in one of the forum responses that
"For active client, when a request to proxy failed, the client will automatically connect to the next proxy server. But the reconnection only occurs the next request to proxy. It’s up to the client to retry the failed request."
What does "retry the failed request" mean? - Is it - retry the PUT or PUTALL() that failed or retry getting the instance of the cache in C++ once I catch the socket failure exception in my code?
Any pseudo code you can furnish would be very helpful
Thank you
Sairam

As soon as we kill the proxy server that the client is connected to, we are getting the following socket disconnect exception, although other proxy nodes are up and running. What am I missing?
terminate called after throwing an instance of 'coherence::lang::throwable_spec<coherence::net::messaging::ConnectionException, coherence::lang::extends<coherence::io::pof::PortableException, std::runtime_error>, coherence::lang::implements<void, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>, coherence::lang::throwable_spec<coherence::io::pof::PortableException, coherence::lang::extends<coherence::lang::RuntimeException, std::runtime_error>, coherence::lang::implements<coherence::io::pof::PortableObject, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>, coherence::lang::throwable_spec<coherence::lang::RuntimeException, coherence::lang::extends<coherence::lang::Exception, std::runtime_error>, coherence::lang::implements<void, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>, coherence::lang::throwable_spec<coherence::lang::Exception, coherence::lang::extends<coherence::lang::Object, std::exception>, coherence::lang::implements<void, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>, coherence::lang::TypedHandle<coherence::lang::Object const> >::hierarchy>::hierarchy>::hierarchy>::bridge'
what(): coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@0xf511730{Id=0x0000012D76A6F7DB0A9869A922AC93E0ABB1489FC9E126BAC29CF570C15A218E, Open=1, LocalAddress=NULL, RemoteAddress=PosixRawSocketAddress[family=2]}: socket disconnect
    at virtual coherence::lang::TypedHandle<coherence::net::messaging::Response> coherence::component::net::extend::AbstractPofRequest::Status::getResponse()(AbstractPofRequest.cpp:189)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse()
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse(long)
    at coherence::component::net::extend::PofChannel::request(coherence::lang::TypedHandle<coherence::net::messaging::Request>, long)
    at coherence::component::net::extend::PofChannel::request(coherence::lang::TypedHandle<coherence::net::messaging::Request>)
    at coherence::component::net::extend::RemoteNamedCache::BinaryCache::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>, long, bool)
    at coherence::component::net::extend::RemoteNamedCache::BinaryCache::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>)
    at coherence::util::WrapperCollections::AbstractWrapperMap::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>)
    at coherence::util::ConverterCollections::ConverterMap::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>)
    at coherence::component::net::extend::RemoteNamedCache::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>)
    at coherence::component::util::SafeNamedCache::put(coherence::lang::TypedHandle<coherence::lang::Object const>, coherence::lang::TypedHolder<coherence::lang::Object>)
    at CoherenceCache::insertData(std::string const&, std::string const&, std::string const&, unsigned long)
    at SessionManager::executeCacheOperation(int, std::string const&, std::string const&)
    at KeyPublisher::publishCycle()
    at VECLFunctor<KeyPublisher>::operator()()
    at VEThread::_run(void*)
    <stack frame symbol unavailable>
    on thread "Thread-1"
Caused by: coherence::io::IOException: socket disconnect
    at virtual coherence::lang::size32_t coherence::net::Socket::readInternal(coherence::lang::octet_t*, coherence::lang::size32_t)(Socket.cpp:333)
    at coherence::net::Socket::readInternal(unsigned char*, unsigned int)
    at coherence::net::Socket::SocketInput::read(coherence::lang::SubscriptHandle<coherence::lang::Array<unsigned char>, unsigned char, unsigned int>, unsigned int, unsigned int)
    at coherence::io::BufferedInputStream::fillBuffer()
    at coherence::io::BufferedInputStream::read()
    at coherence::component::util::TcpInitiator::readMessageLength(coherence::lang::TypedHandle<coherence::io::InputStream>)
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify()
    at coherence::component::util::Daemon::run()
    at coherence::lang::Thread::run()
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"See below our proxy and client configs
Client:
<remote-cache-scheme>
      <scheme-name>extend-dist</scheme-name>
      <service-name>ExtendTcpCacheService</service-name>
      <initiator-config>
        <tcp-initiator>
          <remote-addresses>
            <socket-address>
              <address system-property="tangosol.coherence.proxy.address">10.152.105.169</address>
              <port system-property="tangosol.coherence.proxy.port">9099</port>
            </socket-address>
          </remote-addresses>
         <remote-addresses>
            <socket-address>
              <address system-property="tangosol.coherence.proxy.address">10.152.105.171</address>
              <port system-property="tangosol.coherence.proxy.port">9099</port>
            </socket-address>
          </remote-addresses>
         <remote-addresses>
            <socket-address>
              <address system-property="tangosol.coherence.proxy.address">10.152.105.170</address>
              <port system-property="tangosol.coherence.proxy.port">9099</port>
            </socket-address>
          </remote-addresses>
         <remote-addresses>
            <socket-address>
              <address system-property="tangosol.coherence.proxy.address">10.152.105.172</address>
              <port system-property="tangosol.coherence.proxy.port">9099</port>
            </socket-address>
          </remote-addresses>
         <remote-addresses>
            <socket-address>
              <address system-property="tangosol.coherence.proxy.address">10.152.105.173</address>
              <port system-property="tangosol.coherence.proxy.port">9099</port>
            </socket-address>
          </remote-addresses>
          <connect-timeout>10s</connect-timeout>
        </tcp-initiator>
        <outgoing-message-handler>
          <request-timeout>5s</request-timeout>
        </outgoing-message-handler>
      </initiator-config>
    </remote-cache-scheme>
Proxy:

    <proxy-scheme>
      <service-name>ExtendTcpProxyService</service-name>
      <thread-count system-property="tangosol.coherence.extend.threads">25</thread-count>
      <acceptor-config>
        <tcp-acceptor>
          <local-address>
            <address system-property="tangosol.coherence.extend.address">localhost</address>
            <port system-property="tangosol.coherence.extend.port">9099</port>
          </local-address>
        </tcp-acceptor>
        <outgoing-message-handler>
          <request-timeout>10s</request-timeout>
        </outgoing-message-handler>
      </acceptor-config>
      <autostart>true</autostart>
    </proxy-scheme>
...Thanks
Sairam
Edited by: SKR on Jan 12, 2011 3:09 PM

Http proxy setting

Hi everyone,
I'm new to the forum but not new to Blackberry family. Currently am an proud owner of a bb z10 and runnng latest 10.2.1 this update rocks that is all i have to say but ofcourse there are some improvements need to be done.
Anyway, what i wanted to do is to setup a http proxy settings on my z10 (when using my data service LTE on FIDO) like how it is done on BB playbook (WIFI then add my proxy information). Is there somewhere on the phone setting i can do this or a thirdparty software to achive this. Oh, by the way my phone is unlocked if you wondered.
Thanks for reading.
"BlackBerry: For Getting Things Done (TM)"

I have not worked in SoA server, but since it uses weblogic server underlying (I assume), you can try setting the -Dhttp.proxyHost , -Dhttp.proxyPort system properties ( https for secured URL's) to WLS to specify the proxy details. Also the product might not have the capability to pass user credentials for authentication at the proxy. The version of OSB we are using had this problem. To overcome this you might require to add the URL to the proxy free list in your proxy server. This prevents the proxy from prompting for the user name when you access that URL.

Http proxy authentication for JDev 10.1.3

Hi,
I found the http proxy settings in the "tools->preferences->Web Browser and Proxy" but there are no settings for the username and password. Is there some other way that I can add these.
The problem is that whenver JDeveloper wants to do some http stuff it (or something else is doing it) asks me for the proxy user name & password - this happens over and over again. If JDev is doing this then surely it should remember the username & password.
I sometimes get a JDeveloper dialog "waiting for the connection" come up over the proxy auth dialog and I have to cancel the function so I can authenticate, then re-request the function.
I wish I didn't have the proxy authentication but I have no choice in this dev environment. I do get to choose JDeveloper at least.
Regards,
Simon.

Hi,
I get it when I 'check for updates' and I get it again when I 'go to JavaDoc' - and this is the one where the "waiting for connection dialog" pops on top of the proxy log in and I have to cancel it to log in. Then all subsequent 'go to JavaDoc' requests go straight through.
I would prefer it if I could just configure (in proxy preferences) the username and password so it never asks me. I dont care if it less secure storing the password since I think authenticating proxies are a dumb idea anyway. If the password is not supplied then JDev can ask for it like it does now to keep the security-paranoid people happy.
Also, this morning I got this Exception which appeared at the same time I got a proxy auth window. When JDev finally started all my previously open windows were lost. No real problem but unexpected. Here is the stack dump:
java.lang.NullPointerException
     at oracle.jdevimpl.webdav.api.DAVAuthenticator.getPasswordAuthentication(DAVAuthenticator.java:79)
     at java.net.Authenticator.requestPasswordAuthentication(Authenticator.java:300)
     at sun.net.www.protocol.http.HttpURLConnection$1.run(HttpURLConnection.java:267)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.privilegedRequestPasswordAuthentication(HttpURLConnection.java:263)
     at sun.net.www.protocol.http.HttpURLConnection.getHttpProxyAuthentication(HttpURLConnection.java:1427)
     at sun.net.www.protocol.http.HttpURLConnection.resetProxyAuthentication(HttpURLConnection.java:1246)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:950)
     at oracle.ide.net.HttpURLFileSystemHelper.exists(HttpURLFileSystemHelper.java:191)
     at oracle.jdevimpl.webdav.net.WebDAVURLFileSystemHelper.exists(WebDAVURLFileSystemHelper.java:423)
     at oracle.ide.net.URLFileSystem.exists(URLFileSystem.java:498)
     at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:126)
     at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
     at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
     at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1758)
     at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
     at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
     at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
     at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
     at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:353)
     at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1824)
     at oracle.ide.layout.Layouts.activate(Layouts.java:758)
     at oracle.ide.layout.Layouts.activateLayout(Layouts.java:179)
     at oracle.ideimpl.MainWindowImpl$2.runImpl(MainWindowImpl.java:734)
     at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Where is the http proxy setting?

I need to set a proxy setting in order to browse internet over a wifi connection. I searched over the settings but couldn't find where to set the proxy. Where is the setting located?
System: ZTE Open, Firefox OS 1.1 stock.

hello rolando, the proxy settings are available under'' firefox > options > advanced > network > connection''.
[[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

Just bought ATV. hope http proxy setting will be in UI instead of via apple configurator

i just bought apple TV and loaded latest firmware 5.2.
from the knowledge base, understand that http proxy can be setup via apple configurator after ver 5.1.
it can only be installed in MAC.
i am really hope your developer team could bring the said function out to user interface instead of going through all the hassle.
looking forward for your early reply

Thanks for the idea. I had already thought about using aliases but that wouldn't stop the Application folder showing a looooooooooong list o applications. As I said, having things clear is just a crazy habit of mine. Now that I know the trick I will just "survive" having FCS applications in their default location. I know I'm the only one here doing things differently. It's just that I have never had that problem with any other application and it was turning me crazy.
By the way, if anyone would like to use aliases, using an underscore as the first characters help having things on top of the list. For instance, the alias "_Multimedia" would appear before "Adobe".

Proxy setting for Internet Explorer

Recently purchased new CPU with Windows 8.1. I am not able to access Explorer. I get an error message about proxy settings. How do I change this?

Hi,
To change proxy server settings.
Click the Tools button, and then click Internet Options.
Click the Connections tab, and then click LAN settings.
uncheck the Use a proxy server for your LAN check box..
Sudheer MCP,MCSA(Server 2012)

My wife can't watch movie because of http proxy setting how do I find it?

? my wife can't watch movie because of proxy setting

The proxy setting is located in the WiFi network details. Go to Settings > WiFi and touch the "i" to the right side of your network to see what they are.

Http proxy setting for webservice client.

Similar Messages

Maybe you are looking for