HTTP pull the data

Hi All,
Could you please let me know "pull" the xml file from URL through SOAP adaptor. I have used only Sender SAOP adaptor. Here I need to use pull data and send it to R3 system. I am bit confuse how I can trigger the receiver SOAP adaptor and sending data to R3 system.
my requirement is SOAP(HTTP)Receiver-R3 sytem (Receiver)
Could you plese share some toughts how i can do this.
thanks,
Venkat

Hi Venkat,
Pulling using SOAP protocol in SOAP adapter is not possible.. check the AXIS functionality of SOAP sender Adapter. For this please search SDN and you will get many hints
Regards
Suraj

Similar Messages

Pull the data from Azure sql and load into the on premises data base

Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Connecting to SQl server ( MS acess front end) and pull the data into BI

Dear all,
i need to extract the data from SQl server ( MS acess front end) and pull the data into BI .
i need to know what are the steps need to follow on this..
can any one help me on this...!
Thanks,
Siva

Hi,
1. login to sql server u2013 with ur server credentials and connect.
2. select ur sql for ex: sap bw
3. Right click u2013 sapbw - task - export data From sql to excel I m exporting So give sql details
4. Destination u2013 select excel.. and browse where u want to save the fileu2026
5. give next
6. select from which table u want to export
7. click on next
8. click on finish
9. close
10. go to desktop and open the xyz.xls file
11. not make it as csv file and load the data to BI as a flat file
Hope it will help you.
Regards,

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

Pull the data from legacy System into report and display with SAP data

Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.

Steps:-
Define the file path on selection screen:-
Selection screen data
    select-options   (s_)
      parameters     (p_)
      radio buttons (r_)
      checkboxes     (x_)
      pushbuttons    (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter:    p_file    type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
    exporting
      filename                = l_fname
      filetype                = 'ASC'
      has_field_separator     = '#'
    tables
      data_tab                = lt_data
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17.
if sy-subrc <> 0.
    message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want.

How to pull the date parameter to appear in the report template?

Hi Gurus, and Experts,
I need to pull the date parameter I selected in BIP to appear in my report template? How to code this in BIP?
Identifier are: dto and dfrom
date fromat string: MM-dd-yyyy
Regards,
JP
Edited by: user10955574 on Nov 10, 2010 2:38 AM
Edited by: user10955574 on Nov 10, 2010 2:39 AM

Declare the parameter in the template as
<?param@begin:param1?>
and use it as <?$param1?>

Pull the data from ORACLE

Hi Guru's,
I would like to know ,How to pull the Data from Oracle tables to BW.
tell me scratch onwards...
regards
sekhar ch

Hi...
In the admin workbench open the modeling tab and select Source Systems
In the right pane, right-click on Source Systems and select Create
A dialog requires you to define the type of source system. Select Database System
Enter a description for the source system
Once you accept the definition of the source system, you have to provide the following information, save and back out:
DBMS: ORA (Oracle)
User Name: Your UID
DB password: Your pwd
Conn. Info: sql*net string
Select Permanent connection if this is the case
If everything went well, you should see the new source system. When you do a right-click and ask for the DataSource overview, the first time you execute it you will be prompted to generate the application hierarchy
In order to test connectivity, right-click on the source system and select Select Database Tables
The following screen shows up. Click on the execute button
any tables or views that you have access through your UID
Select a table or view and click on Edit DataSource
To test data retrieval, click on Display table contents
Designate the application component, determine the type of DataSource (Text, Master data, or Transaction data) then generate the DataSource
with regards,
hari

Pull the data from database.

Hi EveryBody,
I have a requirement in universe if the end user will select the date from (1/8/14 to 10/8/14) then pull the data from the database. but when the end user select the data more than 10 days(e.g 1/8/14 to 15/8/14 etc...) then no need to pull the data from database.
how will write the filter in the universe?
how will achieve this? please help me.
Thank you.

Hi ,
I am assuming you are giving prompt for start date and end date respectively start_date and end_date.
please see the below work around. (below is pseudo code)
1. create one dummy objects as
case when @prompt(end_date) - @prompt(start_date) <= 10 then = 1 end
Remember text used in dummy object should be same as you use it for you date prompts
2. pull this objects in where clause along with your date prompts as
dummy_object = 1
It will work as below :=
your report will be prompted for start_date and end_date .
Same values will be passed to dummy objects.
When dummy object will be executed , it will check for end_date-start_date <=10 or not.
If it is less then 10 then query will executed else it will come out as where clause is not satisfied.
Hope this answers your question :-).
Regards
Jeevan

How to pull the data into smartform after designing layout?

how to pull the data into smartform after designing layout?

call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
Check the below Sample code.
FORM label_print.
DATA : g_fm_name TYPE rs38l_fnam,
         g_output TYPE ssfcompop,
         g_control TYPE ssfctrlop,
         g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
         g_dest TYPE rspopname,
         g_printer TYPE rspoptype..
REFRESH : i_out[],i_qals[].
SELECT matnr maktx
         INTO TABLE i_out
         FROM makt
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   spras = sy-langu.
SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
         INTO TABLE i_qals
         FROM qals
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   charg = i_mseg-charg.
*FM to accept the device type and returns the short name of the output device
CALL FUNCTION 'EFG_GET_PRINTER'
    EXPORTING
      x_no_dialog = ' '
      x_obligatory = 'X'
    IMPORTING
      y_tddest     = g_dest
    EXCEPTIONS
      cancelled    = 1
      failed       = 2
      OTHERS       = 3.
*device type name for the output device
SELECT SINGLE patype                                  "#EC CI_NOFIELD
         FROM tsp03d
         INTO g_printer
         WHERE padest = g_dest.
*printer setting
g_control-no_dialog = 'X'.
g_output-tdarmod = '1'.
g_output-tdcopies = '001'.
g_output-tddest = g_dest.
g_output-tdprinter = g_printer.
g_output-tdnewid = 'X'.
g_output-tdimmed = 'X'.
CLEAR wa_mseg.
LOOP AT i_mseg INTO wa_mseg.
    READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
check for the status and filter the records
    CLEAR : wa_qals.
    LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                AND charg = wa_mseg-charg.
      CALL FUNCTION 'STATUS_TEXT_EDIT'
        EXPORTING
          objnr            = wa_qals-objnr
          spras            = sy-langu
        IMPORTING
          line             = l_status
        EXCEPTIONS
          object_not_found = 1
          OTHERS           = 2.
      IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
        DELETE i_qals.
      ENDIF.
    ENDLOOP.
    SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
    IF i_qals IS INITIAL.
      l_msg = text-002.
    ELSE.
      READ TABLE i_qals INTO wa_qals INDEX 1.
      SELECT prueflos vbewertung
             INTO TABLE i_qave
             FROM qave
             WHERE prueflos = wa_qals-prueflos
             AND   kzart = 'L'.
      IF sy-subrc <> 0.
        l_msg1 = text-003.
      ENDIF.
      SORT i_qave.
      CLEAR : wa_qave.
      IF NOT i_qave IS INITIAL.
        READ TABLE i_qave INTO wa_qave INDEX 1.
        IF wa_qave-vbewertung = 'A'.
          l_msg = text-002.
        ELSEIF wa_qave-vbewertung = 'R'.
          l_msg1 = text-003.
        ELSE.
          l_msg1 = text-003.
        ENDIF.
      ENDIF.
    ENDIF.
    CLEAR : wa_ser03.
    READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
*Calling Smartform
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = g_form
      IMPORTING
        fm_name            = g_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
*Calling FM generated from the smartform
      DATA : l_date(10) TYPE c,
             l_date1(10) TYPE c,
             l_date2(10) TYPE c,
             l_date3(10) TYPE c,
             l_hyphen(1) TYPE c VALUE '-'.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDLOOP.
    IF sy-subrc <> 0.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDIF.
ENDLOOP.
IF sy-subrc = 0.
    MESSAGE i000(zm).
ENDIF.
ENDFORM.                    " label_print

How to pull the data using READ_TEXT

Hi,
I was trying to use the READ_TEXT function module to pull the data from the sales order, but i am not sure what are the values exactly i need to pass.
ID
LANGUAGE
NAME
OBJECT
Since the above parameters are mandatory to get the text from sales order ... can you please suggest me. We are using customized screen ... if user enteres the data in the long text field in the customized screen - it should be updated in the sales order... how can i achieve... can any one suggest me
regards
jaya

Hi,
In that text TC --> come to change mode >menu goto->header.
There you find all info.
aRs

Is there anyway to pull the data from an iPhone/iTunes backup file?

Is there anyway to pull the data from an iPhone/iTunes backup file so it can be read and imported into a DROID phone. Have a customer with a dead iPhone and they went out and purchased a DROID as a replacement and would like all their contacts to be imported into the DRIOD. Is there any software out there that can do this?

Here is one that can at least get at the data: iPhone Backup Extractor
There may well be others of better value. Google is your friend.
You'll probably need to do something with the data you can extract, like add it to Outlook, rather than being able to send it directly to the driod.
tt2

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Forms Builder - form not pulling the data from the DB into the datablock

I'm working on a school project, and I'm not sure if I'm doing something wrong, or if something is wrong with my setup.
I created a basic form, 3 fields, and ID, firstname and lastname
the wizard connected fine, pulled the three fields into forms builder
I setup a canvas - type content with the a form format layout of the three fields.
saved the form.
When I run the form and it's displayed, nothing gets pulled into the fields (all blank).
Shouldn't it pull at least the first row from the table?
it says it's on record 1/1
XP, Oracle 10g, Form builder 10.1.2,
I'm not getting any errors
I want to get this basic form working first, before I start adding to it, and it doesn't seem to want to cooperate.
I've done the same steps as in the tutorials....

I did find that, if I put data in the ID, first and lastname on the form, and click Execute & Save on the Menu, it does add it to the database.
Maybe what I'm missing, is how do I get the form to read from the database when it starts up?

HTTP pull the data

Similar Messages

Maybe you are looking for