Report is not pulling the data from multiprovider in BI 7.0
Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK
Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR
Similar Messages
-
Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?
If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability -
Report is not fetching the data from Aggregate..
Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
HariHi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR -
The report can not retrieve the data from the DB
Dear all,
I am facing a problem is that i have ready designed reports in Crystal. While refreshing the report in Crystal, it gives an error that it can not retrive the information from the database. But, if i am using the application which the report is attached, it is giving me the results and showing the report in Crystal. Even, for testing if i add a new field, i have to run it from the application, but directly from the Crsytal Reports, it displays an error.
I hope you will help me in the issue.Could you please provide more information:
What is the database? (Oracle, SQL Server, xml, etc.)
What type of connectivity? (ODBC, Native, OLE DB, etc)
Are application and Crystal Reports are running from the same machine?
What is the error message? Any error numbers? -
Query is not picking the data from multiprovider
Hi All,
i have defined a query on a multiprovider which is made up of three ods one from sales orders, delivery, and billing but when i run the query ...its not picking up order quantity for some sales orders and also its not picking all the items available for that orders...but for some orders its picking up the order quantity but not delivery quantity...
order quantity is coming from sales orders ods and delivery quantity is coming form delivery ods, billing quantity is coming from billing ods...can somebody help me with a suggestion like what could be ther problem...
any sugestions will be highly appreciated.
with regards
harishdear Harish,
multiprovider works as union,
you have order, delivery, billing, e.g the data like
order
orderno orditem customer product ordqty
ORD001 1 a x 10
ORD001 2 a y 20
ORD002 1 b x 30
delivery
delvno delvitem customer product delvqty
DLV001 1 a x 8
DLV002 1 b x 25
billing
billno billitem customer product billqty
BIL001 1 a x 8
multiprovider
orderno-orditem-delvno-delvitem-billno-billitem-customer- product-ordqty-delvqty-billqty
ORD001 1 blank blank blank blank a x 10 blank blank
ORD001 2 blank blank blank blank a y 20 blank blank
ORD002 1 blank blank blank blank b x 30 blank blank
blank blank DLV001 1 blank blank a x 8
blank blank DLV002 1 blank blank b x blank 25 blank
blank blank blank blank BIL001 1 a x blank blank 8
what can you do is remove order no, order item, delivery no, delivery item, billing no, and billing item from query row area.
hope this helps. -
Forms Builder - form not pulling the data from the DB into the datablock
I'm working on a school project, and I'm not sure if I'm doing something wrong, or if something is wrong with my setup.
I created a basic form, 3 fields, and ID, firstname and lastname
the wizard connected fine, pulled the three fields into forms builder
I setup a canvas - type content with the a form format layout of the three fields.
saved the form.
When I run the form and it's displayed, nothing gets pulled into the fields (all blank).
Shouldn't it pull at least the first row from the table?
it says it's on record 1/1
XP, Oracle 10g, Form builder 10.1.2,
I'm not getting any errors
I want to get this basic form working first, before I start adding to it, and it doesn't seem to want to cooperate.
I've done the same steps as in the tutorials....I did find that, if I put data in the ID, first and lastname on the form, and click Execute & Save on the Menu, it does add it to the database.
Maybe what I'm missing, is how do I get the form to read from the database when it starts up? -
Pull the data from legacy System into report and display with SAP data
Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.Steps:-
Define the file path on selection screen:-
Selection screen data
select-options (s_)
parameters (p_)
radio buttons (r_)
checkboxes (x_)
pushbuttons (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter: p_file type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
exporting
filename = l_fname
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = lt_data
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want. -
Hi EveryBody,
I have a requirement in universe if the end user will select the date from (1/8/14 to 10/8/14) then pull the data from the database. but when the end user select the data more than 10 days(e.g 1/8/14 to 15/8/14 etc...) then no need to pull the data from database.
how will write the filter in the universe?
how will achieve this? please help me.
Thank you.Hi ,
I am assuming you are giving prompt for start date and end date respectively start_date and end_date.
please see the below work around. (below is pseudo code)
1. create one dummy objects as
case when @prompt(end_date) - @prompt(start_date) <= 10 then = 1 end
Remember text used in dummy object should be same as you use it for you date prompts
2. pull this objects in where clause along with your date prompts as
dummy_object = 1
It will work as below :=
your report will be prompted for start_date and end_date .
Same values will be passed to dummy objects.
When dummy object will be executed , it will check for end_date-start_date <=10 or not.
If it is less then 10 then query will executed else it will come out as where clause is not satisfied.
Hope this answers your question :-).
Regards
Jeevan -
How we will pull the data from Sap-Bi to sap-Bpc
Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AMTough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection... -
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor
HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPashaHello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
Folder mapping with Unix XI box / XI is not pulling the file from folder
We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex -
Hi Guru's,
I would like to know ,How to pull the Data from Oracle tables to BW.
tell me scratch onwards...
regards
sekhar chHi...
In the admin workbench open the modeling tab and select Source Systems
In the right pane, right-click on Source Systems and select Create
A dialog requires you to define the type of source system. Select Database System
Enter a description for the source system
Once you accept the definition of the source system, you have to provide the following information, save and back out:
DBMS: ORA (Oracle)
User Name: Your UID
DB password: Your pwd
Conn. Info: sql*net string
Select Permanent connection if this is the case
If everything went well, you should see the new source system. When you do a right-click and ask for the DataSource overview, the first time you execute it you will be prompted to generate the application hierarchy
In order to test connectivity, right-click on the source system and select Select Database Tables
The following screen shows up. Click on the execute button
any tables or views that you have access through your UID
Select a table or view and click on Edit DataSource
To test data retrieval, click on Display table contents
Designate the application component, determine the type of DataSource (Text, Master data, or Transaction data) then generate the DataSource
with regards,
hari -
Is there anyway to pull the data from an iPhone/iTunes backup file?
Is there anyway to pull the data from an iPhone/iTunes backup file so it can be read and imported into a DROID phone. Have a customer with a dead iPhone and they went out and purchased a DROID as a replacement and would like all their contacts to be imported into the DRIOD. Is there any software out there that can do this?
Here is one that can at least get at the data: iPhone Backup Extractor
There may well be others of better value. Google is your friend.
You'll probably need to do something with the data you can extract, like add it to Outlook, rather than being able to send it directly to the driod.
tt2 -
Pull the data from Azure sql and load into the on premises data base
Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu
Maybe you are looking for
-
Today I had the unhappy experience of a company or site I visited that installed three programs I didn't want. I uninstalled all of them in windows control panel (]remove programs). This however did not solve my problem.....no matter what I did I cou
-
I bought an ipod2 yesterday and all the photos were from an old computer (that I don't want to synch with) were transferred in the store without synching with it. I was told I could delete any I didn't want later but now find I can't delete any witho
-
MSI K9N2GM-FD unable to set memory voltage.
I just bought a MSI K9N2GM-FD and i'm trying to set the memory voltage but the setting remains at [Auto] and grayed out. No key seems to adjust it, is this feature disabled on this board?
-
How to dynamically include jsp files using jsf el in include tag ?
Hi, I'm trying to get the jsp file name from my backing bean to use it in an include tag but I can't make it work When using this piece of code I can get the generated path <h:outputText value="/_partial/#{myBean.jspName}.jsp"/>whereas in th
-
Lost pictures, how do I retrieve them?
I had a file/folder of pictures on my dock. I attempted to move them from the dock to finder by means of drag and and drop. I dropped it before I go to finder and it disappeared with the poof icon. I can not find them in finder. How do I recover them