HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized when sending EDI from ICH

Hi
When I try to send an EDI from our ICH-server (SCM) to a R/3-target system via PI-server (v7.0) , I get :
u201Du2026
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
u201C
This error is fetched in the ICH-servers sxmb_moni
I have found several tips and tricks for this situation on SDN.
But, my main-question is:
Which user is not allowed to login?
Is it XIAPPLUSER? I can't find the user in the tracelog for the message. Only the original person who created the EDI. (I'm quite sure that user is not the one the system is complaining about).
Does anybody knows how to analyse this?:
Where can I get clear info on which user that can't login to PI?
Where do I check the password?
Note, the other way around works fine. I.e sending messages from R/3 to ICH via PI.
So, I guess that this has to do be something with the ICH:s configuration.
Appreciated
/Joakim

1) Where can I get clear info on which user that can't login to PI?
Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
2) Where do I check the password?
Check in SU01 if the user is not locked or pwd is OK. Password will be known to basis team. Cross verify with team.
Further,clear adapter engine cache (sxi_cache -> Goto -> Adapter Engine Cache -> Delete cache contents)

Similar Messages

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

When sending job from Final Cut Pro to Compressor using local QCluster

When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
If I use 'This Computer' it works fine.
What gives?
Fresh install of OS and FCS.
Thanks!

I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized

Hi all,
I am having one issue i.e Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
I am doing HTTP to RFC..
Plz anyone can help me on this

Hi,
Check SND search help for more info, mean time you can have a look at these steps..
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Regards,
Sarvesh

Why do I get an error code 5 when sending photos from iPhoto?

why do I get an error code 5 when sending photos from iPhoto?

Read related topic
Thank you & Best regards
syrpimp
=======================================================
“You must continue to gain expertise, but avoid thinking like an expert." -Denis Waitley

Runtime error when sending email from PCUI

Hi,
When sending email from an activity in PCUI, I get runtime error, Line 2201, error, 'Object Expected'.
Any idea?
Thanks,
AR

Hi AR,
This appears to be a javascript error. Could you give some more details about this error.
Regards,
Hemanth

Load x# of messages when sending email from my pop account

Hi
I'm getting a "load x# of messages" when sending email from any address on my pop account. No problem receiving messages from other accounts. Is there a setting that can remedy this?
Thanks

My z10 is going back today, for multiple reasons
Contacts won't sync across
Won't work properly with my car when all previous BBs did
Lots of useful features have disappeared
But most importantly NONE of my email accounts will send mail from it when they all did previously with the Storm2.
A big thumbs down from me for the z10 even if it is a fancy looking phone and the browser is much better. I stuck with BB because I wanted a tool not a toy

SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)

Hello Friends
I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
I keep getting the following error message when I try to access data from IVIEW of portal.
"SAP XI error: 401 Unauthorized"
What may be the reason? If some one can help me, I would really appreciate it.
Thanks
Ram

Thanks Srinivas for your help.
I tried accessing the URL directly and got the error message
"User Credentials not passed via Enterprise Portal. Please contact your Administrator"
Any more suggestions?
Thanks again
Ram

ERR: HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized

Hi All,
     I have a scenario which transfers data from ABAP Proxy(client 200 of XI) to XI(client 100 of XI) IS using the interface "ValueMappingReplicationOut" and the receiver adapter is XI. While executing an ABAP program from client 200 (to trigger the proxy), I'm getting the following error in the receiver side (SXMB_MONI client 100).
"HTTP response contains status code 401 with the description Unauthorized Error when sending by HTTP (error code: 401, error text: Unauthorized)"
XI adapter Settings:
Target :Host XI server IP address
Service :Port Number (8010)
path : /MessagingSystem/receive/JPR/XI
User :XIAPPLUSER
I have gone thru most of the related forum/blogs available. Couldn't figure out the problem.
Looking forward for some help.
Thanks in Advance.
Ajay.

Hi Sudharshan and Udo,
           Thanks for your prompt reply. It was the problem with the Authentication Type. Now it is not showing any error.
    The scenario is to update the data in the run time cache of the IS. But it is not happening.
REPORT ZVALUEMAPPING.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
ls_value_mappings type svmr_value_mapping_replication,
ls_item type svmr_value_mapping_rep_item,
lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123345'.
ls_item-context = 'http://test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'CRM'.
ls_item-identifier-value = '2'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
Use the same guid for another value of the same group
ls_item-group_id = '315286378563858425463215845123345'.
ls_item-context = 'http://test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'R3'.
ls_item-identifier-value = '1'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
call method lcl_value_mapping->execute_asynchronous
exporting
output = ls_value_mappings.
commit work.
catch cx_ai_system_fault into lcl_system_fault.
write: 'Error: ', lcl_system_fault->errortext.
<b>The above mentioned is the program we used</b>.
And when I check for the scheme 'FormOfAddress' and agency 'CRM' in the ID -> Tools -> Value Mapping, there is no value as such. Kindly calrify.
Thanks,
Jothivel.
Message was edited by: Jothivel Sundaram

IDOC to XI : HTTP_RESP_STATUS_CODE_NOT_OK   401 Unauthorized

Hi Guys,
I meet a problem while send idoc from ECC to XI in testing enviroment. I check the messege ID, find red flag with error message
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
I guess something wrong with configuration. Because can not see the port number here. Any one can tell me how to solve this problem? Thanks !!!
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Attribute>
<SAP:Name>SecurityProfile</SAP:Name>
<SAP:Value>securityProfileWSSE</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>addressingMode</SAP:Name>
<SAP:Value>destination</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>authenticationModeBasicAnon</SAP:Name>
<SAP:Value>basicSAP</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value>XI_SUS_RGQCLNT301</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>isMessageSecurity</SAP:Name>
<SAP:Value>0</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonClient</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonLanguage</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonPassword</SAP:Name>
<SAP:Value isPassword="true" />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonUser</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>passHopList</SAP:Name>
<SAP:Value>1</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value />
</SAP:Attribute>

Hi,
This Error - HTTP_RESP_STATUS_CODE_NOT_OK Might also occur because of authorization Check sm59 HTTP destination on R3 that points to the XI integration engine.
Check this
HTTP_RESP_STATUS_CODE_NOT_OK
Regards
Seshagiri

How to send EDI from WCF adapter to WCF service

Hi,
1. I have created an orchestration which is published as WCF service.
2. I have created an orchestration which receives an XML from WCF client and process it.
3. I have created a WCF dynamic send port.
Problem: From this dynamic send port, I want to send EDI file to a WCF service that will receive this EDI file. How can I achieve this. Below are my concerns:
-> For creating this WCF service, I need to know the contract of Biztalk WCF adapter which sends EDI file.
Thanks ...

Hi,
How can we create WCF service to receive the EDI sent by the BTS. What contract should be used for receiving this EDI file in WCF service.
What changes have to be made in the orchestrations to send the EDI file to the WCF send Dynamic port. Below is the code i am using.
EDIOutboundPort(Microsoft.XLANGs.BaseTypes.Address)="URL Address";
EDIOutboundPort(Microsoft.XLANGs.BaseTypes.TransportType)="WCF-basicHttp";
Please correct me if i am wrong
Thanks
"How can we create WCF service to receive the EDI sent by the BTS. What contract should be used for receiving this EDI file in WCF service" - This is two different questions.
"How can we create WCF service to receive the EDI sent by the BTS" - Using BizTalk WCF Services Publishing Wizard, the wizard would ask for the "Create BizTalk receive locations in the following application " for creating
the receive location for the message published to the exposed WCF service. Through this receive port/location, the service would receive the message.
In this case, I am not sure why do you want to expose the Orchestration as WCF Service when you want to send message to this Orchestration/WCF service (which after converting from Orch) through another orchestration. You could either use call/start orchestration
to send message from one to another.
"What contract should be used for receiving this EDI file in WCF service" - may be this question is not correct. You have created a Orchestration which you exposed as WCF service. So while creating the Orch you know the type of message this Orchestration
is bound to, so use the same contract. Or as mentioned in my earlier reply, use "Consume WCF wizard" to consume the WCF service which would create the web message for you.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

HTTP Error: 401 unauthorized when executing a costcenter report.

Hi.
I get this HTTP error when executing an costcenter report.
The steps I do is following.
Call upp the report Y_D02_77000xxx
Under the "kostenstellen:Selection I Fill in this values.
Controlling area
Fiscal Year
From Period
To Period
Plan version
and finally i enter the "Cost Center group"
Then i press "execute" and get the result for differrent Cost Element, i get 2 lines "*Total" and
"**Over/underabsorption"
Now i doubleclick Over/underabsorption and select report "Cost Centers: Actual Line Items"
Now i Should get a new window woth results but instead i get a blank screen with the errormessage:
"HTTP error: 401 unauthorized"
This procedure worked fine until a couple of weeks ago.
Anyone have any ideas about what could be the problem?
Regards Johan

You might want to check all of your connections in SM59. When you get the 401 error, this is sometimes due to a connection failure (bad password and so on) in the RFC connections (this can also happen if you are using the Content Manager).
Hope that helps.
J. Haynes

HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized when sending EDI from ICH

Similar Messages

Maybe you are looking for