Http to RFC or SOAP to RFC (synchronous)

Hi,
I need to connect PHP with RFC via XI/PI
Request will be send from php developed web pages to R/3 (RFC) to get data back to web page.
I think to resolve this scenario 1u2019ve two options
1: SOAP to RFC (synchronous)
2: HTTP to RFC (synchronous)
Can you please suggest me the scenario?
Thanks for you time
Regards,
Farrukh Ghani

Hi Ghani,
The two options you mentioned we can use,but it depends on how PHP web site going to send data,if it is going to send webserive then use SOAP adapter,you are expecting response ,the RFC wil work as synchronous.
If it is not Web Service other option is HTTP,receiver would be RFC only.
How to configure SOAP->XI>RFC or HTTP->XI-->RFC scenarios,simple search in sdn will give many blogs,search in sdn,
if you unable to find right one let me know..
Regards,
Raj

Similar Messages

Synchronous RFC to SOAP scenario (RFC or XI adapter?)

Hi there,
i have following functional requirement from my customer, SAP is going to send some data (3 fields) to XI and XI has to send them to an appl that will return a status. This status has to be sent back to SAP.
As the appl deals with xml messages, the nonSAP side is going to be integrated via receiver synchronous SOAP CC.
But question is, which of the following is the best integration approach (adapter to use) in the SAP side??
At first i thought sRFC and XI adapters would fit these requirements but i have several doubts:
1)how the RFC is to be implemented to be able to export the data and finally, import the status received from the external appl.???
2)how could we do this with the XI adapter??? Does it support synchronous messages? Is there any step by step guide on the sdn showing ?
Thanks in advance and best regards,
David

Dear,
I have created an interface like the below url.
http://www.****************/Tutorials/XI/RFCtoSOAP/page2.htm
but i am not getting Response, why it is happening.
IR, ID test configuration success. but when i am triggering data. not showing in moni.
please suggest me
Regards,
Kiran Polani

RFC -- XI --- SOAP synch scenaio

Hi Experts,
My current scenario is RFC<> XI <-> SOAP. Rfc sending request and getting responce back from WebService, current scenario is working fine. Now i want to modify existing scenario, I want to send WebService response to RFC and Receiver Mail adapter also, please advice me what should i modify in my scenario. i do not want to change my existing RFC.
Thanks
Dhanush.

Hi Gaurav,
May i know why do we use BPM at the beggining for receiving request from R3 to XI,
is it possible to do the same like below steps.
1) RFC sends the request to XI ,
2) XI sends the request to Webservice
3) webservice gives the response back to XI
after receiving the response to XI from webservice, is it possible to use BPM in this step to send the response to RFC and Receiver Mail adapter. instead of using BPM at the beginning.
can any one help me how to do useing this approach.
other than this approach: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Thanks,
Dhanush.

RFC - XI -SOAP problem

Hi,
I am doing RFC -XI -SOAP scenario in which I am sending PO no. from R/3 using RFC --> call the webservice using SOAP --> get response back in RFC response.
in this all the test is successful, there is no error in SXMB_MONI or RWB (all successful) , but I can't get the data back as Response from Webservice (no payload in sxmb_moni) , and webservice guy told me that my message even can't reach to webservice host server.
Pl. suggest any resolution urgent, (or how to trouble shoot)
I allready visited most blogs of SOAP (3387/3408,trouble shooting) . but if it give any error then I can cure, here it is not giving any error and not giving response aslo.

Hi,
Check this two links complete walk throug RFC-XI-SOAP.
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Regards,
Phani

Public URL for Synchronous SOAP to RFC scenario

Hello Everyone,
I have synchronous SOAP to RFC scenario.
i have created the http URL for testing environment through sender agreement.
However, now the user wants a public URL and that too secured one ... means ( https ) in production.
i tried this blog, but Service registry is not configured in our landscape.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/23725
is there any other way ..?
Regards,
Ravi

The process of creating the wsdl will remain same. The url in your case will start with HTTPS instead of HTTP. Note that the port at which HTTPS data would be received will be different than HTTP port and thererfore you need to change that as well. You don't have to set any client authentication unless there is a business requirement. You may simply use certificates for SSL.
In some cases, if PI always receives data through web-dipatcher (ask your network team), then the data hostname and port of web-dispatcher should be used.
Regards,
Prateek Raj Srivastava

RFC-to-SOAP webservice using HTTPS

Hi experts,
I have a RFC-to-SOAP (sync) and the URL of the webservice is using HTTPS. I'm not the owner of the webservice.
Encountered these errors
- for sender comm :
com.sap.aii.af.ra.ms.api.DeliveryException: Peer sent alert: Alert Fatal: illegal parameter
- receiver comm :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Peer sent alert: Alert Fatal: illegal parameter: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
We are not using certificate authentication so I don't think that's the cause.
Have checked that the https is running ok for ABAP but I don't think that got anything to do with the errors. Is there something wrong with SSL setting for J2EE? If yes, how may I check?
Are there some parameters to be set up? In the RFC sender comm & SOAP receiver comm, I do not find any special settings for https.
I have read this link : http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm. Is it necessary to set the Exchange Profile Parameters? My BASIS colleague is now checking it.
Thanks for reading and will appreciate any advice!

Thanks Prateek for the quick reply!
Re HTTPS certificate, do you mean the cert for my XI server or the cert from the web service?
I have tested calling the web service using SOAPUI and it works fine without using the cert given by the web service (which is expired anyway)...

RFC to SOAP Synchronous

Hi all,
Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC. Please explain in detail.
would appreciate your helpful information
Thanks

Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC.
So you mean to say the RFC that you include in the Request of message interface is RFC1 and that in the Response of the same MI is RFC2?
If the sending Business System (SAP) is the same then this should be like any other RFC to SOAP sync scenario.
You may need to mappings RFC1_to_SOAPReq and SOAPResp_to_RFC2
Develop the MI accordingly with the corresponding Messages included and then include the appropriate mappings in Interface Mapping.
Regards,
Abhishek.

Synchronous SOAP to RFC

Hi All,
I have a doubt that in a Synchronous SOAP to RFC/PROXY interface that is it we need to configure the entire Interface and then have to test the Webservice for the response from Altova??
I have configured SOAP at the sender and RFC at the receiver but my Customize BAPI is not yet ready but I want to test the Webservice from Altova,Is it so that i need to configure the whole scenario and test it.
Isnt it enough if I do basic Configuartion??
Thanks & Regards,
R.K

hi,
if u want to test u r WEBSERVICE using altova spy... u need not configure whole scenario.. configure simple soap to file scenario and check u r webservice..
if u want to check syncronous scenario... for the testing use a BAPI which is already existing..
Thanks,
Madhav
Note:Points if useful

Help SOAP to RFC Scenario using BPM (Synchronous communication)

Hi,
I am doing a scenario from SOAP to RFC scenario(Synchronous communication). Here I am creating a PM Notification in the SAP system through a webservice.
I am using three BAPI'S here,
1. BAPI_ALM_NOTIF_CREATE
2. BAPI_ALM_NOTIF_SAVE
3. BAPI_TRANSACTION_COMMIT
I am successful in calling the first BAPI from the Web Service. For this I have not used BPM. But to commit the transaction(PM notification in this case), I have to execute the other two BAPI's as well. I have to pass the output of first BAPI to the second BAPI and then execute the 2nd BAPI. And finally have to execute the 3rd BAPI. FYI, 3rd BAPI is not dependent on any output. It has to be executed independently after execution of the first two BAPI's.
How can I execute this scenario? Do I have to use BPM? If yes please let me know the steps in detail. I have not done any BPM scenario till now. So please answer me in detail.
Thanks in Advance,
Vijay
p.s. reward points are must

Hi Vijay,
Yes, You will indeed need a BPM in this case...
Based on my understanding of the Scenario u have explained, here are the steps that would be needed.
1. Receive With the Sync-Async Bridge open.
2. Transformation Step (Between the source Request and The BAPI_ALM_NOTIF_CREATE Request)
3. Send Synchronous
4. Fork
5. In one Branch of the fork - Transformation (Between the BAPI_ALM_NOTIF_CREATE Response and API_ALM_NOTIF_SAVE Request)
6. In the other branch of the fork - Transformation (Between a Dummy Source and the BAPI_TRANSACTION_COMMIT Request)
7. Send Synchronous (to make the 2nd BAPI Call)
6. Transformation ( BAPI_ALM_NOTIF_SAVE Response and the source Response)
7. Send Asynchronous (to make the 3rd BAPI call)
8. Send the Source Response and close the Sync-Async Bridge.
There might be alternative ways also of doing it...
Also a better design would be to take care of the 2nd and the 3rd BAPI call within the code of the 1st RFC Function Module.
Regards,
Abhy Thomas

SOAP to RFC Scenerio: HTTP 500: Internal Server Error

Hi Experts,
    I am facing HTTP 500:Internal server Error. We have SOAP to RFC Scenerio. Interface is working fine, suddenly we are facing this error in Interface. On XI server side - ABAP and JAVA stack are on same Service Pack(SP 13). There is no change done in WSDL and RFC Structure and Mapping side.
Please suggest to resolve this Issue.

Hi Subbu,
   I have found this error in adapter monitoring??.. Please find my finding of XI server related to this below:--
*Error categaory - XI_J2EE_MESSAGING_SYSTEM
Error Code - CALL_ CONSUMER _ERROR
Error :Returning synchornous error notification to calling application:com.sap.aii.af.ra.ms.api.RecoverableException: RecievedHTTP Response code 500:internal Server Error.*
   I have refresh the cache already, but problem still exists.
   Please suggest how to resolve this error.

Soap to RFC synchronous scenario

Dear experts,
i am doing a SOAP to RFC(BAPI_INTERNALORDER_GETDETAIL) sync scenario and the rfc returns a structure with the records as well as the BAPIRET2 records .
Do i need to use fault message types here ?
If yes what would be its purpose in this scenario ?
Ravi

Hi,
if you have BAPIRET2 then all the errors will be over there
so I guess there is no need to use a fault message
Regards,
Michal Krawczyk

SOAP to RFC synchronous scenario with File

Hi,
My scenario is
Java application is sending SOAP message to PI and PI should route that message (after converting SOAP message to XI message) to RFC.
2) After receiving the response from RFC PI should send the response to java application. Now here comes the little tweak, we need to map RFC response to File as well apart from sending SOAP response message (which is generated after mapping RFC response message to Java application response structure) back to Java application.
Is it possible without BPM?

Without BPM you can try below approach, but i would recommend you to use BPM.
Develop SOAP---->PI(rfc look up) -
> SOAP/JAVA application
map RFC loop up response to SOAP receiver and JAVA application/.
Regards,
Raj

ABAP.INTERFACE_REGISTRATION_ERROR while run SOAP - PI - RFC - R3 scenario.

Hi all,
My scenario is a third party send a request (through SOAP message) to PI, then PI will made RFC call to R3 system to retrieve data. (call BAPI_CUSTOMER_DISPLAY).
At IR i've created.
Namespace: http://send
1. Data type: DT_request (which include customer number )
     Data type: DT_response
2. Message type for 2 data types above.
3. Message Mapping for request: MT_request => BAPI_CUSTOMER_DISPLAY and for response: BAPI_CUSTOMER_DISPLAY.response => MT_response.
4. Service Interface: SI_BAPI_CUSTOMER_DISPLAY_REQUEST: Outbound, stateless and synchronous.
    Operator Mapping: which mapping SI_BAPI_CUSTOMER_DISPLAY_REQUEST and SI_CUSTOMER_DISPLAY_RESPONSE (please see 6).
At business system B (on R3 WS ABAP).
Namespace: http://rec
5. Importing BAPI_CUSTOMER_DISPLAY rfc.
6. Inbound Service Interface: SI_BAPI_CUSTOMER_DISPAY_RESPONSE: Inbout, statelss and synchronous (corresponding to 4.)
And then, at ID I've created:
7. SOAP communication channel (cc) for business system A. This cc is sender.
8. RFC communication channel for business system B. This cc is receiver.
9. Sender agreement, receiver determination...
10. Generate WSDL and got the ws url is: http://sapsrv:50100/sap/xi/engine?type=entry&version=3.0&Sender.Service=BVI&Interface=http%3A%2F%2Fsend%5ESI_BAPI_CUSTOMER_DISPLAY_REQUEST
Then, I tried to test with XML spy but get this error:
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context/>
                         <code>ABAP.INTERFACE_REGISTRATION_ERROR</code>
                         <text>No implementing class registered for the interface (ABAP interface, request message SI_BAPI_CUSTOMER_DISPLAY_REQUEST, request message, namespace http://send)</text>
PS: - I've generated all proxy at r3 system. (via tcode Sproxy)
         - And Sxmb_adm I've set Business System is Application System.
Please help me to fix this error.
Many thanks.

>>ABAP.INTERFACE_REGISTRATION_ERROR
You did not complete proxy objects coding yet.

RFC - XI - SOAP ERROR.

I get a difficult error now, following is the error.
my scerio is rfc -> xi -> soap.
http://90.3.9.11:7001/axis/DocumentService.jws?wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:intf="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:message name="exportFileBySapIDRequest">
<wsdl:part name="userID" type="xsd:string" />
<wsdl:part name="mySingleID" type="xsd:string" />
<wsdl:part name="sapID" type="xsd:string" />
</wsdl:message>
- <wsdl:message name="exportFileBySapIDResponse">
<wsdl:part name="exportFileBySapIDReturn" type="xsd:string" />
</wsdl:message>
- <wsdl:portType name="DocumentService">
- <wsdl:operation name="exportFileBySapID" parameterOrder="userID mySingleID sapID">
<wsdl:input message="impl:exportFileBySapIDRequest" name="exportFileBySapIDRequest" />
<wsdl:output message="impl:exportFileBySapIDResponse" name="exportFileBySapIDResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="DocumentServiceSoapBinding" type="impl:DocumentService">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="exportFileBySapID">
<wsdlsoap:operation soapAction="" />
- <wsdl:input name="exportFileBySapIDRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://DefaultNamespace" use="encoded" />
</wsdl:input>
+ <wsdl:output name="exportFileBySapIDResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://90.3.9.11:7001/axis/DocumentService.jws" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="DocumentServiceService">
- <wsdl:port binding="impl:DocumentServiceSoapBinding" name="DocumentService">
<wsdlsoap:address location="http://90.3.9.11:7001/axis/DocumentService.jws" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Design **************************************
DT_exportFileBySapIDRequest
--> exportFileBySapIDRequest
     -> userId
     -> mysingleId
     -> sapId
DT_exportFileBySapIDResponse
--> exportFileBySapIDResponse
     -> exportFileBySapIDReturn
exportFileBySapIDRequest(Message Types)
exportFileBySapIDResponse(Message Types)
MI_RFC_TO_Webservice (Synchronous Inbound)
exportFileBySapIDRequest
exportFileBySapIDResponse
MM_RFC_TO_Webservice_Req
Z_XI_FI_MAILTEST <----> exportFileBySapIDRequest
MM_RFC_TO_Webservice_Resp
exportFileBySapIDResponse <-----> Z_XI_FI_MAILTEST.response
IM_RFC_TO_Webservice
Z_XI_FI_MAILTEST     MI_RFC_TO_Webservice
Configuration ************************************
Communication Channel
sender : SAP_Sender_RFC_SEP
receiver : RFC_TO_Webservice
              target url : http://90.3.9.11:7001/axis/DocumentService.jws
sxmb_moni Trace ************************************
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sscxidev:8001</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 90.3.9.13</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - MYS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) MYS MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping BA9D2B14DB953699A6F72BB0C992416E</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping CAB00A010BF111DBCC73F1B85A1E0C79</Trace>
<Trace level="1" type="T">Interface Mapping http://xi.mySingle.draft.send IM_MYS</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_MYS_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_MYS_ completed. (executeStep() of com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">http://xi.mySingle.draft.send.MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Channel found: - MYS - FS_MysEmpty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://sscxidev:50100/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Async processing: skip mapping of response</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks.

Have you cheked this blogs?
If you havenot,
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

MAPPING JCO_COMMUNICATION_FAILURE (SOAP to RFC scenario)

Hi,
Our system is PI 7.1 EHP1 and the scenario is to SOAP to RFC (Synchronous). I have imported the RFC into ESR and used it as data type for Outbound interface for SOAP.
Initially i havent created any mapping because all Interface fields are same (name and type) with RFC because i have used RFC as data type. When we have tested the integration via SOAPUI we have seen that the request message wasn't transferred to RFC but the response was transferred from RFC to SOAP response. Could it be a bug? or is it normal behaviour?
Later, i have created a graphical mapping without any data conversion etc.. It is just mapping. This time it transferred the request and response as well.
When we have started stress test on a PI system (6000 SAPS), the PI JAVA stack started to use %100 of CPU. We have processed 100 message per minute. After 20 minutes, Java stack of PI has crashed and restarted.
Our plan is to process message more then this test numbers. Possibly it is approx 400 message per minute.
I have found below errors on RWB (approx 250 message have below errors).
How this high CPU consumption can be resolved?
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67</SAP:Stack>
</SAP:Error>
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'loopback:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. connection to partner 'loopback:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th</SAP:Stack>
</SAP:Error>
Kind regards,
Altuğ Bayram

Hi,
Connection between ABAP and JAVA has been broken...thats the reason for the JCO_COMMUNICATION Error
you need to either restart the java or have a look at the RFC Connection JCO_AI_CONNECTION...
re you making use of AAE for this scenario..which can improve the performance than using classic scenario.
performance depends on the hardware of the server also...
Check the sizing Guide of the PI 7.1 on SDN.
Check the below link it may help you..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0b96675-87cf-2c10-b489-dee0ac03f782
HTH
Rajesh

Http to RFC or SOAP to RFC (synchronous)

Similar Messages

Maybe you are looking for