Https not work in java1.6

I have created a java application that communicates with a Server via HTTPS.
I use both jdk and jre 1.4 application work find not error message but
I use jdk 1.6 application not work and application have error message
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.
provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
at HttpClient.execute(HttpClient.java:82)
at HttpClient.main(HttpClient.java:254)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertP
athBuilderException: unable to find valid certification path to requested target
at sun.security.validator.PKIXValidator.doBuild(Unknown Source)
at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
at sun.security.validator.Validator.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
... 14 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to reques
ted target
at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(Unknown Source)
at java.security.cert.CertPathBuilder.build(Unknown Source)
... 20 more
I set certificate by code
System.setProperty("javax.net.ssl.trustStore", "certificate.cer");
I don't understand error message
Help me please.....

Hello
I connection by code
System.setProperty("javax.net.ssl.trustStore", "certificate.cer");
               Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
                 // override default hostname verifier, ignore hostname mismatch error
                 HostnameVerifier hnv = new HostnameVerifier() {
                      public boolean verify (String urlHostname, SSLSession session)
                         if (!urlHostname.equalsIgnoreCase(session.getPeerHost()))
                              if(DEBUG){
                             System.out.println("WARNING: Hostname mismatch (" +
                                                  urlHostname + "), certificate Hostname is "
                                                  + session.getPeerHost());
                         return true;
              HttpsURLConnection.setDefaultHostnameVerifier(hnv);
               URL url = new URL("https","URL",443,"FILE");
System.out.println("Opening connection: " + url);
URLConnection conn = url.openConnection();
            conn.setRequestProperty("username", "USERNAME");
            conn.setRequestProperty("userpassword", "PASSWORD");
            conn.setRequestProperty("Content-Encoding", "gzip");
            conn.setDoOutput(true);
            conn.setDoInput(true);
            GZIPOutputStream out = new GZIPOutputStream(conn.getOutputStream());
            Properties requestProp = new Properties();
              try
                   requestProp.load(new FileInputStream("request.properties"));
                    System.out.println("HttPClient : Properties (request.properties) loaded.");
              catch (IOException ioe)
                   System.out.println("HttPClient: Failed loading properties: request.properties");
            System.out.println("sending contents..");
            requestProp.store(out, "Client Request");
            System.out.println("closing output");
            out.finish();
            out.close();
            // getting response
            GZIPInputStream input = new GZIPInputStream(conn.getInputStream());
            Properties responseProp = new Properties();
            responseProp.load(input);
            if (responseProp != null)
                 responseProp.store(new FileOutputStream("response.properties"), "response from server");
System.out.println("Exiting...");

Similar Messages

  • Only HTTPS requests are working for SOAP Sender and HTTP not working

    wHi Experts,
    We have enabled our HTTPS port ( SSL ) in NWA -- >> Security -- >> SSL and Key stores. So understanding is HTTPS port is now enabled on top of HTTP. So PI should be able to cater requests at both ports.
    Now, we have developed a synchronous SOAP to RFC scenario and downloaded WSDL file. This file has both links -
    a. http:<host>:<port>
    b. https:<host>:<port>
    We intend to make a PI system where both ports can work. Now questions.
    1. When we test web service exposed from PI using SOAPUI tool, only HTTPS works fine and gets the response back. If we try HTTP URL, an error is encountered - HTTTPS scheme is required.
    2. Is this whole understanding that both ports  ( HTTP, HTTPS ) should be able to operate simultaneously correct ? Or this is not at all possible ?
    3. In SOAP Sender, we tried selecting all 3 options - 1. HTTP 2. HTTPS without client authentication 3. HTTPS with client authentication.
       None of the options have any effect on testing, Each time, only HTTPS request works and HTTP doesn't.
    Can anyone please provide some hints for troubleshooting ?
    Thanks..
    regards,
    Rajagopal.

    The error "HTTPS scheme is required" is normally returned when the HTTP Security Level on the SOAP adapter is not set to "HTTP". I can see you have mentioned you have tried all these, maybe a cache refresh has gone wrong? Could try recreating the channel with just HTTP specified as security level and this should allow HTTP or HTTPS
    I assume you are using a different port number for  your HTTP and HTTPS requests from SOAP UI. Normally the HTTPS port is the same as the HTTP port number but the final zero changed to a 1 i.e. https://<host>:50001 instead of http://<host>:50000.
    You should be able to confirm both HTTP and HTTPS work OK by loading some of the system webpages in a browser over HTTP and over HTTPS i.e. http://<host>:<port>/nwa and https://<host>:<port>/nwa
    Chris

  • Polling over https not working

    Hi,
    How do I change below to make it work with https? I tried with AMFSecureChannel but that did not work. Appreciate any help... thanks!
    <channel-definition id="my-amf-poll" class="mx.messaging.channels.AMFChannel">
        <endpoint
            url="http://{server.name}:{server.port}/{context.root}/messagebroker/amfpoll"
            class="flex.messaging.endpoints.AMFEndpoint"/>
        <properties>
            <polling-enabled>true</polling-enabled>
            <polling-interval-seconds>1</polling-interval-seconds>
        </properties>
    </channel-definition>

    Hi
    I think you don't need to do all these things. With default setting create a HTTPService component and assign the required url to it. You can assign the resultFormat.Call the send() method. Optionally you can pass argument to it.
    Hope this helps
    Rush-me

  • URL Rewrite Rule: HTTP to HTTPS Not Working

    Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
    features.
    I've trolled through the Internet for 2 days now for solutions to my problem, including the ones provided by the TechNet forums and by MVP Scott Forsyth. I've tried over 30 solutions, and none have resolved my issue. Granted some of the solutions I've tried
    may have been repeats of others. After trying so many, I have had a hard time discerning the differences. Does it really matter, for instance if the pattern match for the {HTTPS} input is specified as
    "^off$" or just "off"? I see this discrepancy (among others) everywhere. It seems like there are so many variations out there. It is quite confusing for the uninitiated and the newbies like myself to the
    URL Rewrite technology. I have enabled and consulted my "Failed Request Tracing Rules" logs but cannot make any sense of the cryptic information it is providing.
    I just cannot get my reverse proxy server to redirect http requests from the Internet to https to my internal web server. When a user specifies "https://server1.xxxxx.com". he is able to access the internal server via the reverse proxy (IIS) server.
    But when he specifies "http://server1.xxxxx.com" he receives "Server Error 500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed."
    At this point I am at my wits end, and am even considering configuring the protocol translation on our firewall. But this not my preference as it presents another layer of complexity, and device to troubleshoot later on. Below I've pasted my entire web.config
    file with my most current version of the rule in question (in bold) for your review. I started to paste just the specific rule, but thought you might need to see the entire file in case something else may be conflicting with the rule.
    Thank you in advance for your help.
    Dave Robinson
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration>
        <system.webServer>
            <rewrite>
                  <rules>
                    <clear />
    <rule name="HTTP to HTTPS Redirect" enabled="true" stopProcessing="true">
                    <match url="(.*)" />
                   <conditions>
                      <add input="{HTTPS}" pattern="off" />
                    </conditions>
                      <action type="Redirect" url="https://{HTTP_HOST}/{REQUEST_URI}" redirectType="Found" />
                    </rule>
    <rule name="ReverseProxyInboundRule1" stopProcessing="true">
                        <match url="(.*)" />
                        <conditions logicalGrouping="MatchAll" trackAllCaptures="false">
                            <add input="{CACHE_URL}" pattern="^(https?)://" />
                        </conditions>
                        <serverVariables>
                            <set name="HTTP_X_ORIGINAL_ACCEPT_ENCODING" value="{HTTP_ACCEPT_ENCODING}" />
                            <set name="HTTP_ACCEPT_ENCODING" value="" />
                    </serverVariables>
                        <action type="Rewrite" url="{C:1}://server1.xxxxx.com/{R:1}" />
                    </rule>
                </rules>
                <outboundRules>
                    <rule name="RestoreAcceptEncoding" preCondition="NeedsRestoringAcceptEncoding">
                    <match serverVariable="HTTP_ACCEPT_ENCODING" pattern="^(.*)" />
                    <action type="Rewrite" value="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" />
                    </rule>
                    <rule name="ReverseProxyOutboundRule1" preCondition="ResponseIsHtml1">
                        <match filterByTags="A, Form, Img" pattern="^http(s)?://server1.xxxxx.com/(.*)" />
                        <action type="Rewrite" value="http{R:1}://server1.xxxxx.local/{R:2}" />
                    </rule>
                    <preConditions>
                        <preCondition name="ResponseIsHtml1">
                            <add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
                        </preCondition>
                        <preCondition name="NeedsRestoringAcceptEncoding">
                            <add input="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" pattern=".+" />
                        </preCondition>
                    </preConditions>
                </outboundRules>
            </rewrite>
            <tracing>
                <traceFailedRequests>
                    <add path="*">
                        <traceAreas>
                            <add provider="ASP" verbosity="Verbose" />
                            <add provider="ISAPI Extension" verbosity="Verbose" />
                            <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module,FastCGI,WebSocket"
    verbosity="Verbose" />
                        </traceAreas>
    <failureDefinitions timeTaken="00:00:00" statusCodes="404" />
                    </add>
                </traceFailedRequests>
            </tracing>
            <httpErrors errorMode="Custom" />
            <httpRedirect enabled="false" destination="" exactDestination="false" childOnly="false" httpResponseStatus="Permanent" />
        </system.webServer>
    </configuration>

    On Wed, 28 Jan 2015 17:53:41 +0000, dwrobins2000 wrote:
    Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
    features.
    Web/IIS related issues are better posted where the IIS experts are:
    http://forums.iis.net
    Paul Adare - FIM CM MVP
    "The equivalent of treating dandruff by decapitation"
    -- Frank Zappa on the Parents Music Resource Center' censorship plans

  • MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

    ENVIRONMENT
    -1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
    -Exchange 2013 public folders
    -Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
    Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover.  Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
    are seen.
    We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate.  We set the security to ntlm, negotiate on the mapi virtual directory.  We reset IIS and enabled mapi over http in
    the org config.  We run in to problems here.
    Outlook 2010 clients appear to be working fine.  We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
    Outlook 2013 clients are having problems.  As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
      This logon prompt should not occur.    We can confirm that it is connecting via MAPI HTTP and Negotiate.
    If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013.  We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
    I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind.  I would think the same issues would occur with Outlook 2010 but they do not.  I am not sure how to resolve this and I am looking for help.

    I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
    working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
    Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
    HTTP enabled all options are grayed out (please correct me if I
    am wrong):
    This is a very annoying thing – does anybody else have the same problem?
    Any suggestions on this?
    Marc

  • CFHTTP with https not working after server IP change (CF 10, Windows Server 2008 R2)

    Hi,
    We noticed that a call to https://www.googleapis.com/ via CFHTTP stopped working after our sysadmin switched the IP of our web server.
    The error from ColdFusion is:
    JSON parsing failure at character 1:'C' in Connection Failure
    After researching, I tried using the keytool ([CF 10 root]/jre/bin/keytool.exe to import the top-level certificate (GeoTrust Global CA), which was exported from Google Chrome 42 in DER format.
    I used the following flags:
    -import -v -alias GAGLOBAL -file [.cer location] -keystore cacerts -storepass [password]
    It appeared to add correctly, as it displayed the owner, issuer, etc. and asked if I wanted to trust the certificate. I replied "yes", and it responded "Certificate added to keystore" [Storing cacerts]. I then restarted the CF 10 application service. The same error persists.
    Please advise.
    Thanks,
    Dave

    Hi,
    According to your description, my understanding is that manually added statics route disappeared after rebooting.
    Try to use command line:
    Route –p add destination mask subnetmask
    gateway metric costmetric if
    interface
    Note:
    Interface indicates the interface number. Type route print, the first column of
    interface list, find the interface number corresponding to the MAC address.
    Routes added by using the -p option are stored in the registry under the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip \Parameters\PersistentRoutes
    You may open registry edit and check to see if the registry entry is added.
    Besides, you may try a work around way to add this route entry in hosts file, which are stored in the local systemroot\System32\Drivers\Etc
    folder.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Java3D not working with java1.4

    My program worked fine with Java 1.3.1_03 running Java3D 1.2.1_03. Then I recently installed Java 1.4.2_01 with Java3D 1.3.1 OpenGL version
    j2sdk-1_4_2_01-windows-i586.exe
    java3d-1_3_1-windows-i586-opengl-sdk.exe
    I got these messages from my program everytime it gets mouse input or object transform changes.
    [java] wglMakeCurrent Failed: The handle is invalid.
    [java]
    [java] extensionStr == null
    [java] wglCreateContext Failed: The handle is invalid.
    So then I installed same old Java3D 1.2.1_03 into Java 1.4, same thing happening. I also tried the demo that it came with.
    Demos that gave same error:
    AWT_Interaction
    PickTest
    Morphing
    Demos that worked:
    ConicWorld
    HelloUniverse
    TickTockPicking
    It's definitly not my program. I tried installing same stuff on another machine, also running window 2000, same graphics driver, and everything works fine. The only difference is this one has NVidia GeForce4 Ti 4200, the other one (working one) has GeForce256. But my co-worker said he also has GeForce4 and was able to run the program with Java1.4, though I dont know which version exactly.
    Anyone seen similar problem before?

    that worked, i also didnt realize i had to uninstall the other version, thought they just override each other...
    thanks

  • NetConnection.proxyType not works

    Hi,
    I need a solution for this: when the port 1935 is closed, the NetConnection switch rtmpt (port 80). The NetConnection class built in function: proxyType="HTTP" not works or I use not rightly.
    In the FLVPlayback class works this function, but I don't know how...
    Please help me!
    Thank's!

    Thank's for the patience:-)
    Say if 1935 is not blocked - your rtmp connection is going through fine? It's fine
    Now when 1935 is blocked - if you try rtmpt directly does the connection go through.  It's fine, but much slower compared to rtmp: connect, sharedObject read-write, etc...is it normally???
    if you don't set up proxyType property at all - what results do you see. The rtmp not works, but the rtmpt works. (if port 1935 closed)
    Also have you configured FMS to listen to 80? Yes.

  • Weblogic Http Apache Plugin not working

    Hi,
    I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
    http://e-docs.bea.com/wls/docs103/plugins/apache.html
    but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
    http://localhost:80/weblogic/
    Here is my httpd.conf
    Include "C:/bea/alui/plumtreeconf/"
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned. 
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which httpd.exe is located
    # will be used by default.  It is recommended that you always supply
    # an explicit drive letter in absolute paths to avoid confusion.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk.  If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_alias_module modules/mod_authn_alias.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule disk_cache_module modules/mod_disk_cache.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule filter_module modules/mod_filter.so
    #LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    #LoadModule ldap_module modules/mod_ldap.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    #LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule version_module modules/mod_version.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule weblogic_module modules/mod_wl_22.so
    <IfModule mod_weblogic.c>
      WebLogicHost localhost
      WebLogicPort 7001
    </IfModule>
    <Location /weblogic>
      SetHandler weblogic-handler
      PathTrim /weblogic
    </Location>
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch. 
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User daemon
    Group daemon
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName localhost:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features. 
    ProxyRequests On
    <Directory />
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.2/mod/core.html#options
        # for more information.
        Options Indexes FollowSymLinks
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        AllowOverride None
        # Controls who can get stuff from this server.
        Order allow,deny
        Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
        DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "logs/error.log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        CustomLog "logs/access.log" common
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #CustomLog "logs/access.log" combined
    </IfModule>
    <IfModule alias_module>
        # Redirect: Allows you to tell clients about documents that used to
        # exist in your server's namespace, but do not anymore. The client
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://localhost/bar
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
        # ScriptAlias: This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #Scriptsock logs/cgisock
    </IfModule>
    # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        TypesConfig conf/mime.types
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #AddType application/x-gzip .tgz
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #AddHandler cgi-script .cgi
        # For type maps (negotiated resources):
        #AddHandler type-map var
        # Filters allow you to process content before it is sent to the client.
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://localhost/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf
    # Language settings
    #Include conf/extra/httpd-languages.conf
    # User home directories
    #Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    #Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
    images shows. Any help is appreciated.
    Thanks

    Hi,
    There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
    Regards,
    Dinesh

  • Cisco css http keepalive is not working with GET command

    Dear all
    i have Cisco Css connected to Dell Server (via switch)
    Cisco CSS - 192.168.1.3 and Dell Server - 192.168.1.5
    Dell server is setup with windows 2009R2 and Apache HTTPD is version 2.2
    This server is dedicated to host multiple doamins with Apache lik
    www.abc.co.uk
    www.xyz.co.uk
    Now the clinet wants to setup the http keepalive  with specfic web page like /testpage.html  for all these domains. i have teseed with single URI. it is working the comamnds are
    config)# service serv1
    (config-service[serv1])# ip address 192.168.1.5
    (config-service[serv1])# keepalive type http
    (config-service[serv1])# keepalive method head    ( get i have not used due to hash mismatch with apche server, if i use GET it is not working)
    (config-service[serv1])# keepalive uri "/testpage.html"
    (config-service[serv1])# active
    It is working with single URI.  but how can i do the same thing for multiple doamins ?
    for multiple doamins do i need use script ? or can i use with commands ?
    if i need to use script the script is
    !no echo
    ! Filename: httptag-test
    ! Parameters: HostName WebPage HostTag
    ! Description:
    !       This script will connect to the remote host and do an HTTP
    !   GET method upon the web page that the user has asked for.
    !   This script also adds a host tag to the GET request.
    ! Failure Upon:
    !   1. Not establishing a connection with the host.
    !       2. Not receiving an HTTP status "200 OK"
    if ${ARGS}[#] "NEQ" "3"
            echo "Usage: httptag-test \'Hostname WebPage HostTag\'"
            exit script 1
    endbranch
    ! Defines:
    set HostName "${ARGS}[1]"
    set WebPage "${ARGS}[2]"
    set HostTag "${ARGS}[3]"
    ! Connect to the remote Host
    set EXIT_MSG "Connection Failure"
    socket connect host ${HostName} port 80 tcp
    ! Send the GET request for the web page
    set EXIT_MSG "Send: Failed"
    socket send ${SOCKET} "GET ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
    ! Send the HEAD request for the web page
    set EXIT_MSG "Send: Failed"
    socket send ${SOCKET} "HEAD ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
    ! Wait for a good status code
    set EXIT_MSG "Waitfor: Failed"
    socket waitfor ${SOCKET} "200 OK"
    no set EXIT_MSG
    socket disconnect ${SOCKET}sh w
    exit script 0
    in the script i have not used GET becasue, when CSS send GET request to apache it use hash, but apache is not able to respond with same hash and it shows that website is down. more information- click below url
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.40/command/reference/CmdKeepC.html#wp1139668
    (config-keepalive) method
    I have uploaded in CSS with httptag-test file and applied these commands
    service comp.brit.co.uk-80
      keepalive port 80
      ip address 192.168.1.5
      keepalive frequency 10
    keepalive maxfailure 2
    keepalive retryperiod 10
    keepalive type script httptag-test "192.168.1.5 /testpage.html  www.abc.co.uk
    keepalive type script httptag-test "192.168.1.5 /testpage.html  www.xyz.co.uk
    but this script is not working
    my question is:
    1.do i need use script only to setup http keepalvie with webpage for multiple domains ?
    2.with out using script is there any solution like CICSCO  CSS commands  to setup http uril for multiple domains which are on 1 singl server.
    please help me asap

    Hello Muhammad,
    If you wish to use multiple domains for a URI  keep-alive check, and perform a HEAD request what Daniel mentioned is  correct.  You have to use a scripted keep-alive check on the service.  However, you should not use the default "ap-kal-httptag" script to do so  as it's limited to only 1 website (unless you modify the script).  You're best bet would be using the "ap-kal-httplist" script on the CSS  as it allows the checking of 2 different websites along with a webpage  to check for each site using HTTP HEAD method.
    !no echo
    ! Filename: ap-kal-httplist
    ! Parameters: Site1 WebPage1 Site2 WebPage2 [...]
    ! Description:
    !    This script will connect a list of sites/webpage pairs.  The
    !   user must simply supply the site, and then the webpage and
    !   we'll attempt to do an HTTP HEAD on that page.
    ! Failure Upon:
    !   1. Not establishing a connection with the host.
    !   2. Not receiving a status code 200 on the HEAD request on any
    !      one site.  If one fails, the script fails.
    ! Make sure the user has a qualified number of arguments
    if ${ARGS}[#] "LT" "2"
            echo "Usage: ap-kal-httplist \'WebSite1 WebPage1 WebSite2 WebPage2 ...'"
            exit script 1
    endbranch
    while ${ARGS}[#] "GT" "0"
            set Site "${ARGS}[1]"
        var-shift ARGS
        if ${ARGS}[#] "==" "0"
            set EXIT_MSG "Parameter mismatch: hostname present but webpage was not"
            exit script 1
        endbranch
        set Page "${ARGS}[1]"
        var-shift ARGS
        no set EXIT_MSG
        function HeadUrl call "${Site} ${Page}"
    endbranch
    exit script 0
    function HeadUrl begin
    ! Connect to the remote Host
    set EXIT_MSG "Connect: Failed to connect to ${ARGS}[1]"
    socket connect host ${ARGS}[1] port 80 tcp 2000
    ! Send the head request
    set EXIT_MSG "Send: Failed to send to ${ARGS}[1]"
    socket send ${SOCKET} "HEAD ${ARGS}[2] HTTP/1.0\n\n"
    ! Wait for the status code 200 to be given to us
    set EXIT_MSG "Waitfor: Failed to wait for '200' on ${ARGS}[1]"
    socket waitfor ${SOCKET} " 200 " 2000
    no set EXIT_MSG
    socket disconnect ${SOCKET}
    function HeadUrl end
    Rather  then modify the default "ap-kal-httplist" script on the CSS I would  simply define the arguments within the service configuration itself.   Something like the following (using your service example):
    service dell-192.168.1.5
    ip address 192.168.1.5
    keepalive type script ap-kal-httplist "www.abc.co.uk /testpage.html www.xyz.co.uk /testpage.html"
    active
    As  long as the server is configured to reply to host headers, and the page  is configured to retuen a "200 OK" the above service configuration  should work. If there are any errors simply run "show service  " to view why there was a failure. If there is a  failure, and the output from the command specified shows a line number  run the following command against the script to view at what point  (line) did the failure occur:
    show script ap-kal-httplist line-numbers
    Hope this helps!
    - Jason Espino

  • Blazeds 4.0.0.7548 is not working on Websphere over HTTPS protocol

    Hi All
    Our application is on Blazeds 4.0.0.7548 deployed on websphere 7.0.  While this application works fine on HTTP but it doesn't work consistently on HTTPS.  It throws following exception
    FaultEvent fault=[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Failed"] messageId="C6ABB836-C505-CAFC-F114-0006E0E0305F" type="fault" bubbles=false cancelable=true eventPhase=2.
    Following is the screeshot
    I don't see any exception in the logs as well.
    HTTP works fine, i only see this exception on HTTPS.
    Regards
    Ravi

    As I mentioned earlier, we are using MGCP for that particular fax port and the gateway we use as H323.
    Even I'm not pretty sure about using mixed protocol, I believe this gateway gonna used to support call center calls. SInce MGCP is easy for configs they might have confiugred only the port as MGCP endpoint.
    Now its not working with both the cases, not in mgcp as well as fallback mode. Can you reveiw the debugs and see why I have to remove "modem passthrough" command from voice service voip section which of our standard config and works well with all other gateway of ours. Please help here.

  • Parameter is not working in HTTP( XML FEED) dataset in bi publisher 11g

    Hi,
    I have used parameter in BI Publisher 10g for HTTP(XML Feed) dataset to have dynamic url which worked by using ${p_url} where p_url is the parameter.
    The same procedure when I use in BI Publisher 11g is not working.It does not consider the parameter ${p_url} and throws the following exception
    *oracle.xdo.dataengine.datasource.plugin.DataAccessException: java.lang.Exception: java.net.MalformedURLException: no protocol: ${p_url}*
    Has anyone faced this issue?
    Please let me know if am doing something incorrect here.
    Thanks &Regards,
    Balaji

    Thanks for your reply.
    In BI Publisher 10 g we are using it this way ${p_url}.
    p_url is the parameter which gives us the entire URL for the XML feed.
    e.g. p_url=http://rss.news.yahoo.com/rss/topstories
    The p_url takes the entire url.
    Please let me know if this can be done the same way in 11g.
    Thanks,
    Balaji

  • JSPs and Servlets do not work on Apache HTTP- Procesor Intel P4

    Computer description: Intel Pentium 4 processor with 20GB HD
    drive, 1GB RAM, Windows 2000Pro, Service pack II
    Before installation:
    We created a temporary directory on our Intel Pentium. 4
    processor server (e.g. \TEMP).
    Copied the contents of the Oracle* Server CD to the temporary
    directory.
    Renamed each copy of the SYMCJIT.DLL to SYMCJIT.OLD.
    Set the java_compiler=none environment variable.
    Installation:
    We run the SETUP.EXE from the \TEMP\install\win32 directory and
    install Oracle 8.1.7 EE Rel 3 Typical
    Configuration tool Net8 Configuration Assistant succeeded
    Configuration tool Oracle Database Configuration Assistant
    succeeded
    Configuration tool Starting Oracle HTTP service: 7 times error
    message (java.exe has generated errors and will be closed by
    Windows, You will need to restart the
    program, An error log is being created)
    HTTP server responses.
    All Java programs do not respond (e.g. IsItWorking does not work)
    After installation:
    Open the jserv.conf file chack that ApJServManual is set to Off.
    set ApJServLogLevel debug (will give more informative errors for
    debugging)
    set ApJServDefaultHost www.in.oracle.com (to your machine name
    with the
    domain name or IP address)
    set ApjServDefaultPort 80000
    Open the jserv.properties files and make the following changes:
    bindaddress=www.in.oracle.com (Same name as ApJServDefaultHost
    in jserv.conf)
    port=80000 (same port as in the jserv.conf)
    Enable all log options in jserv.properties:
    log=true
    log.file=/usr/local/apache/var/log/jserv.trace
    log.timestamp=true
    log.dateFormat=[yyyyMMdd HHmmss:SSS]
    log.channel.init=true
    log.channel.terminate=true
    log.channel.serviceRequest=true
    log.channel.authentication=true
    log.channel.requestData=true
    log.channel.responseHeaders=true
    log.channel.signal=true
    log.channel.exceptionTracing=true
    log.channel.servletManager=true
    Java servlets and JSP still do not redspond.
    If we try to start HTTP server from Windows service, we always
    get message: unable to locate dll: The dynamic link
    library Perl.dll could not be found in the secified path (our
    path: C:\oracle\ora81\bin;C:\oracle\ora81\Apache\Perl\5.00503
    \bin\mswin32-x86;
    C:\Program Files\Oracle\jre\1.1.7
    \bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;) and
    error message: Could not start
    OracleOraHome81HTTPServer service on local computer. The service
    did not respond to the start or control request in a
    timely fashion.
    Starting Oracle HTTP service from Start/Programs/Oracle: 7 times
    error message (java.exe has generated errors and will be closed
    by Windows, You will need to restart the
    program, An error log is being created)
    We tested also modifications of oraparam.ini
    a. Copy only the install directory from the CD to the hard
    disk ,say, e:\temp.
    b. Open oraparam.ini and make the following modifications
    (Assuming CD
    drive is f:)
    * Change the "SOURCE=" line to use the full path to the CD
    instead of a
    relative path. (i.e., SOURCE=f:\stage\products.jar)
    * Change the "JRE_LOCATION" line to use the full path to the CD
    instead of a
    relative path. (i.e.,
    JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1
    \DataFiles\Expanded)
    * Change the "OUI_LOCATION" line to use the full path to the CD
    instead of a
    relative path. (i.e.,
    OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1
    \DataFiles\Expanded
    * Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
    first argument.
    (i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
    ^^^^^^
    * Other entries should remain the same
    c. Launch setup.exe from the temporary location on your hard
    drive (i.e.
    e:\temp\install\ win32\setup.exe). This will use the modified
    oraparam.ini and pick up the information from the CD since the
    absolute
    locations are specified.
    After that modification of oraparam.ini, the HTTPServer does not
    respond at all.
    So we undo changes on oraparam.ini and reinstall HTTP.
    We copied SYMCJIT.DLL and jvm.dll from JDK 1.1.8_008 to
    Apache\jdk\..
    Since then at least the demo IsItWorking responses, but database
    connection can not be established. But jsp demo still do not?
    THX in advance
    Neja

    I'm still having problems with Portal config (as part of 9iAS) on
    a P4 but i have cleared the hurdle of the HTTP listener (i
    think).
    I downloaded and installed the JRE that is P4 compatible from
    www.sun.com (it puts it under c:\program files)
    then overwrote all the files in the jre directories in the cd
    staging area with the files from Sun (i.e. all symcjit.dll
    locations). I also had to put a file "javai.dll" in the same
    directory as the file "java.exe". This got the install all
    working.
    The service will fail first time because the install creates
    another set of incompatible jre files. You must again search for
    symcjit and repeat the above procedure.
    You must also overwrite the files in the c:\program
    files\oracle\inventory\jre directories (sorry cant remember exact
    path).
    Hope this helps.
    Mark Gornicki
    PS if anyone knows why Portal config hangs at 67%
    (before/during/after processing "bulkload.jar" section) please
    let me know :-)

  • I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

    I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Infopath not working After migrating site to HTTPS

    I have infopath installed as client and I publishes it on the server. I dont have infopath on the server and I cannot install there.
    Developed infopath form with a dataconnection via webservice "GetUserProfileByName". It was working fine with HTTP
    After moving to HTTPS I updated all dataconnections URL to HTTPS and published again.
    When I open the form first it gives the following Error "You do not have permissions to access a Web service that provides data required for this form to function correctly."
    In our environment we have SSL certificate on ISA server which is F5. Any request comming as HTTP its changes to HTTPS. SSL is not installed on SP Servers (Both nodes). This URL I refered (http://ikarstein.wordpress.com/2011/07/01/869/) 
    for this issue but as per our network team they told it might not work bcoz our SSL is on F5 not on SP Server.
    When I changed the the infopath form settings in Central Admin by unchecking the "<label>Require SSL for HTTP authentication to data sources</label>" the error changed to "An error occurred while trying to connect to a Web service infopath 2010". I followed
    this link (http://support.microsoft.com/kb/981684) for help but i am not sure how this will work or I am in teh right direction.
    I checked the option mentioned in last step and deleted the form library and and published the form gain. Now I am facing the same issue as mentioned in 3rd step.
    When I deleted the dataconnection of "GetUserProfileByName" Error removed. But I cannot get user information on the form, which i need as a part of requirement :(
    Please help!!!

    After this SSL import I am having a weird scenario.
    Some I come across this issue.
    An error occurred querying a data source.
    click OK to resume filling out the form...
    An error occured while trying to connect to a Web service.
    Correlation ID: 787cabf5-3040-4357-866f-a3891f80046f
    The server farm consists of 6 servers, two of which are load balanced front end servers via an F5.
    We’re using IE6, IE7, and IE8 officially (I am using IE
    The servers do all have Disableloopbackcheck = 1.
    When I try to access within server, It works fine everytime although the request go to f5 first. (i.e. Request come via internet)
    Any Advice!!!

Maybe you are looking for