Human reaction time interface problem

While waiting for some random window to open I usually carry on doing my work, which involves CAD (lots of mouse inputs). When suddenly another window opens on top of my work, I frequently and accidentally click on its contents because my reaction time (best
human average >250ms) is not enough to halt my mouse input. This results in time loss since I end up running software or opening new windows that I need to close. This is also valid for error or popup windows of any sort inside a program or web browser.
Windows should incorporate some detection between front window activation and mouse or keyboard input, and if that time is less than a certain minimum reaction time, then that command should be ignored, meaning that mouse click or keyboard input was certainly
not meant to be applied on that window. Is this feature already available? How can I get it?
I am running windows 8-64.
Thanks

Hi,
It seems that we cannot implement your idea/

Similar Messages

  • Interface Problems in Yosemite

    Problem shows up when using software other than the native OS X apps.
    If I attempt to close a window behind the app that has focus by clicking the red x part of the semaphore buttons (top left on every window) it will not work unless I change focus to that app by clicking the bar at the top.
    As an example if I'm using Byword to view a document while composing an email in Airmail once I finished and move on to viewing, say a receipt, in Airmail and want to make a copy of that receipt and place it on the desktop. I'm done with Byword and it is covering the desktop so why not close it and get it out of the way. I move the mouse pointer over the red X part of the semaphore buttons and click, nothing happens. I have to bring Byword into focus by clicking the title bar, then click the red x to finally close the window. If the app below Airmail happened to be Safari the red X works properly.
    On my Mac Mini using Yosemite this works properly for all apps.
    This is only a slight problem but I have been having the odd quirky interface problems for the past while and I'm worried that something has gone south and these may end up adding together to make a very large problem.  Initially I had problems with PopClip which seemed to be screwing around with the interface buttons in Rapidweaver 6. I removed the app to clear that problem using AppDelete.
    While trying to diagnose this problem I have removed all the auto login apps that I can and rebooted several times to no avail.
    Any help would be greatly appreciated!
    EtreCheck version: 2.1.8 (121) log:
    EtreCheck version: 2.1.8 (121)
    Report generated February 5, 2015 at 12:32:53 PM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                Empty 
            BANK 1/DIMM1
                Empty 
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
            iMac 2048 x 1152
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:0:46
    Disk Information: ℹ️
        APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
                Core Storage: disk0s2 120.99 GB Online
                Core Storage: disk1s2 999.35 GB Online
        APPLE SSD SM128E disk0 : (121.33 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Boot OS X (disk0s3) <not mounted> : 134 MB
            Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
                Core Storage: disk0s2 120.99 GB Online
                Core Storage: disk1s2 999.35 GB Online
    USB Information: ℹ️
        Verbatim Portable USB 3.0 Drive 1 TB
            EFI (disk3s1) <not mounted> : 210 MB
            Verbatim HD (disk3s2) /Volumes/Verbatim HD : 999.86 GB (31.06 GB free)
        Apple Inc. FaceTime HD Camera (Built-in)
        Logitech USB Receiver
        Samsung Electronics Co., Ltd. ML-2160 Series
        Wacom Co.,Ltd. Wacom Wireless Receiver
        Razer Razer 1600dpi Mouse
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Transmit.app
        [not loaded]    com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Click for support]
            /Applications/VMware Fusion.app
        [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
        [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
        [not loaded]    com.vmware.kext.vmnet (0231.47.74) [Click for support]
        [not loaded]    com.vmware.kext.vmx86 (0231.47.74) [Click for support]
        [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
            /Library/Extensions
        [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
        [loaded]    com.avatron.AVExFramebuffer (1.7 - SDK 10.9) [Click for support]
        [loaded]    com.avatron.AVExVideo (1.7 - SDK 10.9) [Click for support]
        [loaded]    com.globaldelight.driver.Boom2Device (1.1 - SDK 10.10) [Click for support]
        [loaded]    com.logitech.manager.kernel.driver (4.10.1 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) [Click for support]
        [loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
        [loaded]    com.eltima.SyncMate.kext (0.2.5b15) [Click for support]
        [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
        [loaded]    com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Click for support]
        [not loaded]    com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Click for support]
            /System/Library/Extensions/Soundflower.kext
        [not loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
        [running]    com.logitech.manager.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.realvnc.vncserver.peruser.plist [Click for support]
        [not loaded]    com.realvnc.vncserver.prelogin.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    at.obdev.littlesnitchd.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.barebones.authd.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.realvnc.vncserver.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    com.sharpcast.xfsmond.plist [Click for support]
        [loaded]    com.sheepsystems.CocoaPrivilegedHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
        [loaded]    de.appgineers.Mountain.Helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [running]    com.ecamm.printopia.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.pia.pia_manager.plist [Click for support]
        [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
        [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
        [failed]    ws.agile.1PasswordAgent.plist [Click for support] [Click for details]
    User Login Items: ℹ️
        WD Quick View    Application  (/Library/Application Support/WDSmartware/WDQuickView.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1Password
        Clip to DEVONthink
        Choosy
        Ember
        Save to Pocket
        Stache
    3rd Party Preference Panes: ℹ️
        AirServer Preferences  [Click for support]
        Backblaze Backup  [Click for support]
        Choosy  [Click for support]
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Hazel  [Click for support]
        Java  [Click for support]
        Logitech Control Center  [Click for support]
        Logi Preference Manager  [Click for support]
        Printopia  [Click for support]
        WacomTablet  [Click for support]
        WDQuickView  [Click for support]
        Web Sharing  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 1.11 TB Disk used: 848.39 GB
        Destinations:
            Verbatim HD [Local]
            Total size: 999.86 GB
            Total number of backups: 101
            Oldest backup: 2013-11-22 16:26:50 +0000
            Last backup: 2015-02-05 15:55:38 +0000
            Size of backup disk: Too small
                Backup size 999.86 GB < (Disk used 848.39 GB X 3)
    Top Processes by CPU: ℹ️
            12%    mds
             2%    WindowServer
             0%    loginwindow
             0%    fontd
             0%    mds_stores
    Top Processes by Memory: ℹ️
        292 MB    mds_stores
        172 MB    SophosScanD
        172 MB    InterCheck
        155 MB    SophosAntiVirus
        120 MB    Finder
    Virtual Memory Information: ℹ️
        3.32 GB    Free RAM
        2.72 GB    Active RAM
        1.40 GB    Inactive RAM
        1.15 GB    Wired RAM
        1.56 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 5, 2015, 12:30:03 PM    Self test - passed
        Feb 4, 2015, 10:59:58 PM    /Library/Logs/DiagnosticReports/RapidWeaver 6_2015-02-04-225958_[redacted].cpu_resource.diag [Click for details]
        Feb 3, 2015, 03:07:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0717_[redacted].crash
        Feb 3, 2015, 03:02:23 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0223_[redacted].crash
        Jan 15, 2015, 08:04:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-15-200441_[redacted].panic [Click for details]

    Try un-installing Sophos.
    Sophos Un-install

  • Reaction Time Test

    Hi everybody.
    I've been tearing my hair out trying to program a Reaction Time Test.  I have been trying to search for topics that were like my program, but these programs were based on lights and on-off functions while mine is based on random number generator.
    To explain a bit more in detail, I am creating a program that allows a test subject to choose 2 numbers to add or subtract (from 0-10).  Then the program will randomly generate numbers between 0 and 10 and display it to the subject and the subject will need to react when the displayed number equals the answer in their head. On the programs side, when the number randomly generated equals the true answer the loop will start a timer and when the subject presses the button, the timer stops and displays the time.
    Right now, I'm having a problem with the last sentence.  I can't make heads or tails of how to get a timer started or getting it to properly output. 
    Any ideas?
    Heres the most recent version of my vi
    Solved!
    Go to Solution.
    Attachments:
    ControlReactionTest.vi ‏15 KB

    You can just ignore button reads until the time is right.
    Here's a simple rewrite, see if it makes sense.
    Notes:
    Make sure that all controls have labels. You can hide the label on the front panel, but don't make it an empty string. It makes assigning event, etc. nearly impossible. All controls need a label for code readability.
    Don't maximize the diagram to the screene. That's very annoying.
    Don't trap event structures insude case structures.
    Don't use right-to-left wiring (e.g. for the status)
    Mind your representations. Look at all your red coercion dots. The numbers should be Integers of the same type.
    Watch out for mechanical actions. Your start button is "switch until released" (like a car horn!), making detecting a press hit and miss, epsecially in the presence of long waits.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    ControlTest_MODCA.vi ‏12 KB

  • How to speed up Windows 7's reaction time to my mouse click

    Hi.  We just got new computers at work.  They have approximately 4 gigs of RAM and have Window's 7 on them.  Prior to that we had abysmally old computers running Windows XP.  We have Microsoft Office 365 on them (Not sure how much
    that matters) and it is connected to both an older server and SharePoint.
    I'm positive that there isn't actually a problem with the computer or Windows 7 - it might be really basic harware, however it is brand new.  But everything lags.  Its extremely minor and no one else in the building notices it.  My co-workers
    all say the entire system is faster in every possible way.  However, I get the same problemwith other computers in the building, at least four others.  It lags just slightly when I click on anything, anywhere (Left and Right click).  Letters
    appear to lag behind my key presses, just enough for me to notice and no one else (I do wonder if this is caused by Microsoft Office, since it is so clunky).  I also think the mouse pointer moves slower than the pointers on XP.  Its difficult
    to tell though since I no longer have the old computer to compare. 
    This lag did not exist with the old computers.  My clicks were instantaneously carried out and the appearance of the letters I pressed was immediate.  It might be very minor, but it is driving me insane.  I can't watch the screen when I type
    because it makes me slightly nauseous.  And the click lag slows down my entire process.  I'm pretty sure it isn't actually a problem with Windows 7, I think the OS is just like this.  Is there a way to speed up the reaction time of the mouse
    click and keyboard button presses?
    Thank you for the taking the time.

    1. Use performance monitor for analysis. Without knowing processes that influence response it is hard to give any reasonable advice.
    2. In my experience computers with integrated video card are generally slower. (One such example sits on my desk. It is based on D2700 processor and chipset. 4GB RAM, usable 3.23GB. )
    3. There are several tweek procedures that may increase the response. Start with Win+Pause/Break -> Advances System Settings -> Advance -> Performance -> Performance Options and look here for optimal, disable autotuning, sometimes QoS, prefer
    IPv4 over IPv6 (if you still use IPv4, set bit 5), etc
    4. Perhaps Performance forum is better fit for your problem.
    Regards
    Milos

  • Interfacing problem

    Dear All gurus/experts,
    I need help from you to solve an interface problem. The problem is how to create interface where I want to implement HR application (java) and SAP B1. I am really confusing to the stepwise I must do in creating interface.Do I must define fields/columns, forms, document or report in the SAP B1 side first and then compare to the HR application fields/columnc/forms/documents/reports. The difference between them then fixed and created if required. The main purpose is all the HR process will be handled by HR Application and the data will be sent to SAP B1. The data directly posted to G/L  for example payroll, expenses relate to HR and also pension. is it possible for me to create a template and then the template update to SAP B1 using Data transfer workbench (DTW) ? the application can be updated the data file into CSV, txt, etc. If you have any experience about that, pls share to me.  I appreciate your answer so much.
    TIA.
    Rgds,

    Tks for your answer. Actually it is interfacing other product or solutions, for example human resource solutions or from microsoft dynamics manufacturing module. is it possible to do that ? I appreciate your answer. TIA
    Rgds,

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Time out problem in BPS

    BPS friends,
    We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
    We are on BW-BPS 3.5.
    How can I solve this time out problem? Please respond to me.

    Hi Pat,
    How many record did you copy ??
    Could you restrict the copy in not 1 package ??
    Package per package ...
    I suggest you ..
    e.g. you have restriction by a 0CALMONTH / something ..
    Then,
    You can copy e.g. for January to March, then March to August, etc.
    You can automate it by planning sequence.
    Hopefully it can help you a lot.
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct-.so why can't I get to my emails then?

    When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct….so why can't I get to my emails then?  I've turned the phone off and on twice....that has fixed it in the past but not this time....

    all fixed ha

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Time offset problems with file i/o

    Hello everyone, I'm having a problem with the file i/o VI's. I require my application to save serial data at constant five minute intervals. The problem I'm currently seeing is that on each save to a file a time offset is being added which eventually becomes seconds, then minutes and so on. Since this application is meant to be run for a whole year this is a serious problem.
    Attached is the VI, an Arduino program simulating how the DAQ sends data and a file showing my time offset problem. 
    Any ideas/suggestions/fixes are appreciated.
    Thanks
    Jose Molina
    P.S.
    To run the VI upload the code to an Arduino, select it's serial port in the popup VI then click on Ok. The VI will wait for a time that is a modulo of 5 then create a folder structure inside the same location as the LLB. Inside this folder structure should be a file with the data which should be saved every five minutes if left at the default averaging time.
    Attachments:
    7-8-2012.txt ‏3 KB
    Daq_Simulator.zip ‏1 KB
    Weather_DAQ.zip ‏117 KB

    Sorry I forgot to mention that the averaging time is configurable in the pop up vi at the start. I tried 20 seconds because it's much faster for testing than 5 minutes. Timing is being done by a simple counter that increments each time data is received. So if I receive data the timer increments by 5 because data is sent every 5 seconds. Once the timer is equal to the averaging time the data is sent to the enqueue function and then the blocking dequeue function on the second loop sends the data to the file save vi which then saves the data to the file. 
    Attachments:
    counter.PNG ‏13 KB

  • Recording user reaction time in Flash

    I am running several visual cognition experiments using
    Flash. See there here:
    http://vacognition.wjh.harvard.edu
    Experiments are by definition interactive, in that I am
    recording data from the people who participate. Currently, I just
    record accuracy (did they answer a question correctly or not). Many
    experiments require getting reaction time -- that is, how long did
    it take them to respond. How accurate can I expect my measurements
    to be? In the lab, they would be accurate to about 2-5
    milliseconds. I know it won't be that good with Flash over the
    Internet, but does anybody have any idea *how* accurate?
    Oh, and please participate in the experiments that are
    currently running. I need many, many people to participate,
    especially for
    this
    experiment

    to be a bit more precise i would use the Date object. the
    following is from flash help:
    Date.getTime();
    "Returns the number of milliseconds since midnight January 1,
    1970, universal time, for the specified Date object. Use this
    method to represent a specific instant in time when comparing two
    or more Date objects."
    the number of milliseconds!!! so it is pretty accurate,
    isn't it? :)
    as you start an exercise you create a Date. as the user
    finishes with the answer you create another Date. after it you can
    substract the two Dates then you get the passed time in
    milliseconds!
    (at start)
    startTime = new Date();
    (when the user finishes)
    endTime = new Date();
    duration = endTime.getTime()-startTime.getTime() //and this
    is in milliseconds
    hope it's clear and accurate enough... ;)
    adam

  • Interface Problems: DBA = Data Pump = Export Jobs (Job Name)

    Hello Folks,
    I need your help in troubleshooting an SQL Developer interface problem.
    DBA => Data Pump => Export Jobs (Job Name) => Data Pump Export => Job Scheduler (Step):
    -a- Job Name and Job Description fields are not visible. Well the fields are there but each of them just 1/2 character wide. I can't see/enter anything in the fields.
    Import Wizard:
    -b- Job Name field under the first "Type" wizard's step looks exactly the same as in Export case.
    -c- Can't see any row under "Chose Input Files" section (I see just ~1 mm of the first row and everything else is hidden).
    My env:
    -- Version 3.2.20.09, Build MAIN-09.87
    -- Windows 7 (64 bit)
    It could be related to the fact that I did change fonts in the Preferences. As I don't know what is the default font I can't change it back to the default and test (let me know what is the default and I will test it).
    PS
    -- Have tried to disable all extensions but DBA Navigator (11.2.0.09.87). It didn't help
    -- There are no any messages in the console if I run SQL Dev under cmd "sqldeveloper\bin\sqldeveloper.exe
    Any help is appreciated,
    Yury

    Hi Yury,
    a-I see those 1/2 character size text boxes (in my case on frequency) when the pop up dialog is too small - do they go away when you make it bigger?
    b- On IMPORT the name it starts with IMPORT - if it is the half character issue have you tried making the dialog bigger?
    c-I think it is size again but my dialog at minimum size is already big enough.
    Have you tried a smaller font - or making the dialogs bigger (resizing from the corners).
    I have a 3.2.1 version where I have not changed the fonts from Tools->Preferences->CodeEditor->Fonts appears to be:
    Font Name: DialogInput
    Font size: 12
    Turloch
    -SQLDeveloper Team

  • Time consuming problem in Self update rule

    Hi all:
         We have time consuming problem in self update rule.I have ODS ZOMS001,for this we created self update rule.In process chain we include this self update rule and during delta update,it takes 20 to 25 mins even if there is two records or 10000 records.In delta for this self update rule,it takes the whole records in ODS
        EX: If i have 10000 records during initialise and 10 records in Delta update...For the delta self update rule it takes 100010 records..But it only update delta records values.
    we have to reduce the total time consuming for this self update during delta..
    Waiting for your inputs.
    It would be helpful for your valuable reply.
    Rgds
    MSK

    I think retransporting is the only option available to you. You cannot modify anything in your production system.
    IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
    and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
    hope this helps.
    Praveen

  • I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen.

    I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen. Help!

    Hello there, parihargs1.
    To troubleshoot display brightness issues the following article provides 2 key steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Of note is the following:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Display does not adjust brightness automatically
    The ambient light sensor brightens the display when using the iPhone in brightly lit environments, and dims the display in low light. To test this sensor, do the following:
    If the iPhone is in a protective case, remove it from the case. If there is a protective film on the display, remove the film.
    Verify that the Auto-Brightness setting (Settings > Brightness and Wallpaper) is set to ON, and that the Brightness level is set near the middle of the slider.
    Press the Home button to return to the Home screen and then press the Sleep/Wake button to lock the iPhone.
    In a bright environment, cover the top third of the iPhone to block the light, then press the Sleep/Wake button or the Home button to wake the phone. Slide the slider to unlock the phone.
    Notice the brightness of the screen and application icons; they should be somewhat dimmed.
    Remove the cover from the top of the display and in a few moments the display should get brighter.
    If these steps do not resolve your issue please refer to the "Issue not resolved" section for your next step.
    Thansk for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for

  • Mac partition dissappeared !

    hi there, I have been using bootcamp with windows on my macbook for a number of months without issue. I've now got a problem as follows. When I try to boot my macbook it no longer boots at all, after a few minutes I get - - a black screen with a wind

  • Windows Help and Support screen glitch? And keyboard malfunction! Help!

    I have 3 problems. At the log in screen of my hp stream notebook 11, I wasn't able to complete my password due to a malfunction in one of the keyboard keys. I shut down the computer and came back later to try again. It worked but when I logged in, th

  • Editor option is not opening for table object

    Hi Experts, I have installed OWB 11.1 on my table machine. The strange thing what i found out that, the 'open editor 'option of Table is not opening for oracle module in the design centre.for other object (Like mapping ..etc) 'Open Editor' option is

  • Is it possible to turn off the Apple dock completely?

    I was wondering if it was possible to turn off the Apple dock completely without causing irreparable damage to my system. I am considering using Drag Thing, but when I am using it the functionality seems redundant with the Apple dock, also using both

  • Static IP for Mac OS 10.5 -- Help!

    I'm not sure how to set up an static IP for my macbook. It will be using my airport, not my built in ethernet. Can someone provide me a step by step guide? I'm lost. Thanks!