Hyper-V Error when selecting Disk for a new VM

Hello.
I just got a new HP Server with the following entry level specs - for a small project:
1 x HP DL380e Gen8
1 x QC Processor
8GB Memory
2 x 1TB SATA HDD LFF in RAID1 running from a B120i Controller
OS Running: Windows 2008 R2 Standard on the Host.
I proceeded to install the Hyper-V Role and then created a new VM - which will also be running Windows 2008 R2 Standard (with specs as 2-core, 3GB memory, 2HDDs (OS + DATA)
I started the VM and mounted the ISO - and started the install process till I had to select on which disk to install.  As stated above, I added 2 HDDs in the VM Setting - but I keep getting the message: "No
device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK"
I've checked the BIOS settings of the server and virtualiazation is set as enabled, and also hdd virtualiazation.
Any ideas on how to get around this? I tried going to HP Support but they told me it was a Windows issue and had to seek info from them.
Thanks for any replies.

Thanks Tim for replying.
Actually the solution was quite simple - I reloaded the Windows 2008 ISO from another USB Port.
And the installation completed successfully.  Don't know really what this means though! But at least I'm up and running.
Cheers

Similar Messages

  • Error when select sheet for Excel file from Excel 2013 with visual basic

    Dim AppXL As Object
    Dim MyWorkBook as Object
    Set AppXL = CreateObject("Excel.Application")
    Set MyWorkBook = AppXL.Workbooks.Open("E:\MyFile.xls)
    AppXL.Sheets("Sheet1").Select
    The above code run with no problem when use in machines with Excel 2007 and Excel 2010.
    But when run in machine with Excel 2013,  error with "Out of Range" occur. Kindly advise for any solution.
    TS Lim

    With your highlight on the AppXL.Workbooks.Open, I have solved the problem by re-position the statements.
    Below are the 2 situation which works in for Outlook 2007, 2010 and 2013
    Situation 1, work for Outlook 2007 and 2010 but d not 2013
    With AppXL  
        Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFile.xls")
    Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
      WorkBookFrom.Activate
        .Sheets("Sheet1").Select
        .Range("A1:IV65536").Select
        .Selection.Copy
            WorkBookTo.Activate
        .Sheets("Sheet1").Select
        .Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
        .Range("A1").Select
          WorkBookTo.Save
    End With
    Situation 2, work for Outlook 2007 and 2010 and  2013
    With AppXL  
        Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFiel.xls")
      WorkBookFrom.Activate
        .Sheets("Sheet1").Select
        .Range("A1:IV65536").Select
        .Selection.Copy
    Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
            WorkBookTo.Activate
        .Sheets("Sheet1").Select
    .Range("A1").Select
        .Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
          WorkBookTo.Save
    End With
    Thank you for indirectly  help me to solve the problem.
    TS Lim

  • Error when selecting volume

    Hello,
    I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
    Now it does but I get an error when selecting the volume for Time Machine. The error says:
    "The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
    Does anybody have a clue what I need to do to get my Time Machine working again?
    Thanks!
    BB

    Bauke Boezeman wrote:
    Hello,
    I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
    Now it does but I get an error when selecting the volume for Time Machine. The error says:
    "The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
    Hi, and welcome to the forums.
    I'm not sure if that's the same message, but it sounds like a common permissions problem.
    Try this: Open the Terminal app (in your Applications/Utilities folder).
    In Terminal, the prompt looks like this: user-xxxxxx:~ <your name>$
    (where <your name> is your short user name). It's followed by a non-blinking block cursor (unless it's been changed via Terminal > Preferences).
    At the prompt, type the following exactly as shown, substituting the name of your TM drive exactly, including any spaces, between the quotes:
    sudo chmod 644 /volumes/"TM drive name"/.0011246f8842
    Press Return. You'll get some warnings and a request for your Administrator's password. Type it in (it won't be displayed) and press Return again.
    Then try a +Back Up Now.+

  • Error while selecting entity for composantEO

    Hi,
    Briefly, I do an example of displaying a list of components (and already it works properly), but when I added a link to the removal of components I have encountered an error
    Voila details
    function code delete
    public void deleteComposantMethod(String action,String param)
    System.out.println("Now we are inside deleteComposantMethod");
    System.out.println("we search composant with numcomp : "+param);
    ComposantVOImpl inst=getComposantVO1();
    Row row[]=inst.getAllRowsInRange();
    for(int i=0;i<row.length;i++)
    ComposantVORowImpl rowi=(ComposantVORowImpl)row;
    System.out.println("checking the composant ===> "+rowi.getNumcomp());
    if(param.equals(rowi.getNumcomp().toString()))
    try{
    rowi.remove();
    getOADBTransaction().commit();
    System.out.println("Deleting succes");
    catch(Exception ex)
    System.out.println("error : \n"+ex.getMessage());
    return;
    in the browser page component disapru it seems that it works correctly, but nothing changes at data base and voila the error message I get from embedder OC4J server log
    Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.DMLException: JBO-26080: Error while selecting entity for ComposantEO
    thanks
    Please note: although no board code and smiley buttons are shown, they are still usable.
    thanks

    Hi,
    for those who have encountered the same problem as me, you should check that the table name sql query is of the form Name_Schema.Name_Table.
    For this right click on the entity in the workspace> edit entity> Database Objects> Schema Objects and add the schema name before table name( Name_Schema.Name_Table).
    thanks,

  • Error Message: JBO-26080: Error while selecting entity for PoLines

    I'm using JDev 9.0.4.
    i make a VO from two EO at the BC4J level.
    then i create complete struts JSP Application for this VO.
    so i get a page that i can do New/Edit and Delete to each row.
    when i try to do Edit for some lines (not all of them) i get this error :
    Error Message: JBO-26080: Error while selecting entity for PoLines
    Error Message: ORA-01722: invalid number
    What does it mean ? how can i solve it ?
    Thank You

    Un-comment the following lines to display the stack trace
    oracle.jbo.DMLException: JBO-26080: Error while selecting entity for ElcPoLines
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:832)
         at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:4665)
         at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:3845)
         at oracle.jbo.server.EntityDefImpl.findFromDatabase(EntityDefImpl.java:888)
         at oracle.jbo.server.EntityDefImpl.findByPrimaryKey(EntityDefImpl.java:943)
         at oracle.jbo.server.QueryCollection.findByKey(QueryCollection.java:2524)
         at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:2907)
         at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:6019)
         at oracle.jbo.client.JboUtil.getRowFromKey(JboUtil.java:91)
         at oracle.jbo.html.BC4JContext.getRow(BC4JContext.java:307)
         at oracle.jbo.html.struts11.actions.EditAction.populateBC4JFormBean(EditAction.java:160)
         at oracle.jbo.html.struts11.actions.EditAction.edit(EditAction.java:59)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    java.sql.SQLException: ORA-01722: invalid number
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:890)
         at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2407)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:606)
         at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:4665)
         at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:3845)
         at oracle.jbo.server.EntityDefImpl.findFromDatabase(EntityDefImpl.java:888)
         at oracle.jbo.server.EntityDefImpl.findByPrimaryKey(EntityDefImpl.java:943)
         at oracle.jbo.server.QueryCollection.findByKey(QueryCollection.java:2524)
         at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:2907)
         at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:6019)
         at oracle.jbo.client.JboUtil.getRowFromKey(JboUtil.java:91)
         at oracle.jbo.html.BC4JContext.getRow(BC4JContext.java:307)
         at oracle.jbo.html.struts11.actions.EditAction.populateBC4JFormBean(EditAction.java:160)
         at oracle.jbo.html.struts11.actions.EditAction.edit(EditAction.java:59)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)

  • JBO-26080: Error while selecting entity for VIEW

    When I use the LOV, it brings up all values, except when I search for the letters "wy". It returns nothing, and when I deleted these letters and search again nothing appears and I get this error. Can anyone help, I've been looking at this for a week and have come up with nothing.
    oracle.jbo.DMLException: JBO-26080: Error while selecting entity for IraPtsSponsorVw
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:888)
         at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:5267)
         at oracle.jbo.server.EntityImpl.populate(EntityImpl.java)
         at oracle.jbo.server.EntityImpl.merge(EntityImpl.java:4746)
         at oracle.jbo.server.EntityCache.add(EntityCache.java:525)
         at oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1710)
         at oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2136)
         at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1037)
         at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java)
         at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2650)
         at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:1871)
         at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:1772)
         at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1256)
         at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3206)
         at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2755)
         at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2610)
         at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:2850)
         at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:1941)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:689)
         at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:769)
         at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:706)
         at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3361)
         at gov.fda.cber.pts.controller.strutsactions.LovBimsSponsorAction.prepareModel(LovBimsSponsorAction.java:75)
         at oracle.adf.controller.struts.actions.DataAction.prepareModel(DataAction.java:486)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:105)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)
         at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
         at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    java.sql.SQLException: ORA-00904: "SPONSOR_COUNTRY": invalid identifier
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:181)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:661)
         at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:951)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:693)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1057)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2942)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:640)
         at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:5267)
         at oracle.jbo.server.EntityImpl.populate(EntityImpl.java)
         at oracle.jbo.server.EntityImpl.merge(EntityImpl.java:4746)
         at oracle.jbo.server.EntityCache.add(EntityCache.java:525)
         at oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1710)
         at oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2136)
         at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1037)
         at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java)
         at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2650)
         at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:1871)
         at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:1772)
         at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1256)
         at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3206)
         at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2755)
         at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2610)
         at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:2850)
         at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:1941)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:689)
         at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:769)
         at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:706)
         at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3361)
         at gov.fda.cber.pts.controller.strutsactions.LovBimsSponsorAction.prepareModel(LovBimsSponsorAction.java:75)
         at oracle.adf.controller.struts.actions.DataAction.prepareModel(DataAction.java:486)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:105)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)
         at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
         at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)

    Hi Frank thanks for responding,
    I actually figured it out. I thinkt he problem was that the VO didnt not have a primary key to reference a specific row and was throwing an error. I used ROWID and it works fine now.
    Thank you.

  • Error when selecting batch during prod order creation

    Hi Gurus,
    When selecting batch for production orders components, an error prompted 'Invalid batch, does not match the selection criteria in batch determinat.'
    After checking, it is because the classification is not maintained. So I need to re-create in MSC2N.
    The question is, how/where should I change back the configurations on checking the batch classification during prod ord?
    Thank you.

    Kumar,
    Please let me know how many Component items are there in the BOM? Out of which how many are Phantom assembly?
    It looks like when the BOM is copied to the order it is crossing 9999 items.
    I would suggest you to use an intermediate order/material to reduce this number.
    I think there was an OSS notes for this to extend the number of character length for BOM items numbering (POSNR).
    Hope this helps...Reward your points,
    Regards,
    Prasobh

  • Error when selecting the Report Center tab of the Issues web DB

    I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
    You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

    Hi Ben
    Wyer,
    Have you resolved
    your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
    Best Regards,
    Bruce Song [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Error when charging hierarchy for infoObject hieracky for 0MATERIAL

    Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
    I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
    [http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
    [http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
    Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
    [http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
    Any Idea? Thank-you!
    Artur.
    Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
    Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

    For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
    This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
    I hope this helps
    Regards

  • Getting "JBO-26080: Error while selecting entity for myEO" while updating

    Hi All,
    I am using jdev 10.1.3.4. I am having updatable VO. I want to update an attribute of a particular row. I wrote the below code in my BB.
    ViewObject vo = am.getmyVO();
    Key myKey = new Key(new Object[]{6207});
    Row rw= vo.getRow(myKey);
    if (rw!= null ) {             
    rw.setAttribute("ProcessFlag",processFlag);
    am.getTransaction().commit();
    But, I am getting the below error.
    oracle.jbo.DMLException: JBO-26080: Error while selecting entity for myEO
    Can anybody help me regarding this?
    Thanx,
    Abhijit

    I do agree. Bt, what could be the root cause for this error?
    --Abhijit                                                                                                                                                                                       

  • Error when executing statement for table/stored proc

    Hi All,
          I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
         In my stored procedure I have three insert statements to insert rows in to 3 tables.
        This stored procedure is working fine for two insert statements i.e, 
             For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
        when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
    <i><b>Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
    <i><b>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
       Note:- I have run the stored procedure  with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
    <i><b> Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.</b></i>
    I am struck up with the error, can any body resolve this issue.
    Thanks in Advance,
    Murthy

    Hi narasimha,
                      This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
    Regards,
    Pragati

  • Error when loggong on for external ID "": Error during SAML 2.0 logon

    Hi,
    I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
    N  SAML20 SP (client 400): Incoming Response
    N  SAML20 Binding:          POST
    N  SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
    N  SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
    N  SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
    N  SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
    N  *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
    N  {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
    N  *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
    I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
    I have added the identity provider through transaction SAML2, but it does not seem to be working.
    Here is a decrypted SAML assertion:
    <samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
      Version="2.0"
      IssueInstant="2015-04-02T00:21:06.477Z"
      Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
      Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
      InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
      xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
      >
      <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
      <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
      <ds:SignedInfo>
      <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      <ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
      <ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
      <ds:Transforms>
      <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
      <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      </ds:Transforms>
      <ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
      <ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
      </ds:Reference>
      </ds:SignedInfo>
      <ds:SignatureValue>xxxxxxx</ds:SignatureValue>
      <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
      <ds:X509Data>
      <ds:X509Certificate>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</ds:X509Certificate>
      </ds:X509Data>
      </KeyInfo>
      </ds:Signature>
      <samlp:Status>
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
      </samlp:StatusCode>
      </samlp:Status>
    </samlp:Response>

    Hi Brian,
    I am not sure but you could check below thread and couple of sap note.
    Single Sign On - Sharepoint 2010 to SAP using ADFS
    1799402 - Automatic account creation for SAML 2.0 SP
    1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
    It may help you to resolve / identify the cause of the issue.
    BR
    AKJ

  • Oracle.jbo.DMLException: JBO-26080: Error while selecting entity for

    I have an error like this:
    oracle.jbo.DMLException: JBO-26080: Error while selecting entity for ....
    It happened because my application was updating a few attributes in a ViewObject, And there was a message that showed:
    java.sql.SQLException: ORA-00904: "EI_PPN": invalid identifier.
    My entity object for the view object above has the EI_PPN attribute, and so as well as the table in the database. Why it keeps showing that EI_PPN is an invalid identifier?

    Is the column name also uppercase EI_PPN?

  • JBO-26080: Error while selecting entity for SampleEO

    Hi,
    I have a VO based on Entity Object. While I am going to update a record using this VO, its getting updated in the DB table.
    But after that while I am going to execute the VO for displaying the data its giving the below error.
    "oracle.jbo.DMLException: JBO-26080: Error while selecting entity for SampleEO
    Can anyone suggest what could be the reason for this error?
    --Abhijit

    Hi Timo,
    I am using jdev 10.1.3.4 (jsf-ADF BC). I googled the error but didn't find any solution.
    Is there anyhing to do with the EO configuration or property?
    Any help will be appreciated.
    --Abhijit                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Error when select posting level in document type

    Hi,
    Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
    The Error is : GETWA_NOT_ASSIGNED
    Short text
    Field symbol has not yet been assigned.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.

    If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
    If it doesn't not help - open customer message to SAP.
    Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

Maybe you are looking for

  • How can i send email notification from UCM?

    Hi I am new to this technology. I need to send email notification to the user's, whenever file is checked-in. What is the procedure to send an email notification let us take GMAIL from UCM. 1) Now I have installed UCM in my machine. Do I need to inst

  • Error while using APEX_LANG.MESSAGE in French translated application

    We have an multilingual application (item preference) with English as primary language and French and Spanish as translated versions. The application has been seeded, translated and published and it switches correctly between languages. Except when A

  • File Receiver channel, Append issue on Linux FTP server

    Hi, I have a File_ReceiverChannel_FTP_Order that is using the “File Content Conversion” message protocol. I have setup the adapter to use File Construction Mode “Append” When I run this on a windows FTP server, it is working as designed. But when I’m

  • How to Make Fields in Field Catalog Mandatory

    Hi Gurus, I want to Make Some Fields In Field Catalog Mandatory and Some should be Non Mandatory Can u please help me out as soon as u can. Regards Deep Gaur

  • Application won't install or get deleted

    I am stuck... I am in India and internet is super slow so i was trying to download an application using itunes and in around 1 hour the application was done around 70%. I paused it and now it won't finish installation and i don't even have option to