I am a newbie to labview but have delt with plc's for the last 10 years. I would like to send and recieve certain integer, floating poin
t, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right direction...I am a newbie to labview but have delt with plc's for the last 10 years. I would like to send and recieve certain integer, floating point, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right dir
ection...
t, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right direction...Another option is to talk to the PLC using Modbus. Several versions of Modbus drivers are available online--or I could send you the ones I use.
The big thing to look at is exactly what you want to do in the end. If you are going to be able to use all the features of the DSC, by all means go for it. It will save you a lot of time.
If however, all you want is a remote front panel for the PLC, the DSC might be overkill. Only you can say.
Look at your entire application and where you can see your work going in the reasonable future.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Similar Messages
-
Honestly i really wanna like apple but i keep having these horrible seemly unfixable problems. i have a life and rely on my phone for social activties, school work, my job and relationships so i need it to work 95% of the time but im always let down...
Make the time and take it to the Apple Store. Make an appointment first. Or you can call AppleCare and go for a mail in replacement.
-
I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.
I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/ -
For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
i have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!
Hi
You need to find the format of the drive by looking at its info, my guess would be you are currently in NTFS (windows only) mac can use any mac os journaled or non journaled, or you can use fat32 which is usable on both pc and mac but is unable to move files over 4GB so no good for large file transfers. You will need to re format at some point but this will delete everything currently on the drive.
Hope this helps -
My IPAD2 had a pop up message that an update is available, to close or click on details, so I clicked on details. It took me to an upgrade box, no back up options. I clicked to upgrade it. It downloaded for awhile, then turned off, and when it turned back on, it directed me to plug into my ITUNES with the USB adapter, which I did. When ITunes came up, it said I had to restore it before I could use ITUnes. Again, no other options. I am worried that I just lost everything on my IPAD2 for the last year, apps, photos, documents, settings, email, etc. It is still downloading after 30 minutes. Is everything gone and truly back to factory settings? If so there was no warning for this at all, I'll never get everything back.
I'm not sure what happned either but If you are doing this via iTunes, iTunes should have backed up the iPad first. It can take a good bit of time when you update with iTunes on your computer because iTunes downloads and installs the entire iOS all over again. If you are running iOS 5 on the iPad, and you will be now, you can update OTA via WiFi in the future and the process takes far less time since you will only be downloading an incremental update.
If you are syncing on a regular basis with iTunes, you should have a recent backup. In the worst case scenario, you should be able to restore from the backup. And as stated aboce, you can download all apps again and virtually all purchased content from iTunes (if you live in the U.S.) and you can always sync your iTunes library back to the iPad.
Let the update finish and see where you are then. Come back if you need help. -
For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed. The message then tells me to de-install iTunes and to install the 64 bit version.
Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app. And all the iPhones are inoperative with the 32 bit version I have. I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
Any ideas or suggustions?
Thanks.This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
You have not maintained a rule for the fiscal year variant
1) I have Fiscal Year Variant in the Cube ( it got added along with fiscal year ) but there is no Fiscal year variant in the datasource & when I dont map it Transformation activation prompts error " You have not maintained a rule for the fiscal year variant ".
Can I just delete Fiscal year variant from the cube..does it matter?
2) Fiscal year & Posting Period can be populated from Fiscal Period, is the vice versa possible..? Does the sytem will take care of the conversion..?1. no, you should not delete and you cannot delete fiscal year variant from cube, it's required by fiscal year/ period (compound infoobject), you should add it in your datasource, or you can map with a constant value e.g K4
2. yes, fiscal period can be populated by posting period
some info on time characteristic relationtionship
http://help.sap.com/saphelp_nw70/helpdata/en/44/be8b631c743959e10000000a1553f6/frameset.htm
hope this helps. -
Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?
Sync with the same computer iTunes that you normally sync with.
-
I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not there. How do I add additional options and get my preferred signature style back?
Hi Amanda ,
Which version of Acrobat are you using?
Which signature style are you talking about?
You can go ahead and try uninstalling and reinstalling it and see if that works for you .
Use the cleaner tool to uninstall it .Here is the link.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
You can refer to the following link to re install it .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards
Sukrit Dhingra -
I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?
something other is dowloading somewhere on ipad
-
My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.
Hi there,
You may find the information in the articles below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
-Griff W. -
My credit card and address are registered in the UK. I would like to send an iphoto book to Germany but cannot change the country and therefore the recipient address on iphoto. Why?
https://discussions.apple.com/thread/3590525?tstart=0
-
I have been using FaceTime regularly over the past year or so and suddenly it has stopped working. It seems to dial up and says its connecting and then just switches off. I have a number of other friends who are also having problems with this and also on their iPhones. Does anyone have an answer to this problem?
Make sure all parties are running IOS 7.1.1
http://support.apple.com/kb/TS5419 -
I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?
fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert
Maybe you are looking for
-
How do i change an old apple ID on my phone to my current apple ID?
how do i change an old apple ID on my phone to my current apple ID?
-
Hello! I have an HP Photosmart 7510 all-in-one. I've had it for over a year now, and have never had a problem until recently. It has always printed and scanned just fine. Now I can't get it to scan at all, although it still prints without a probl
-
I cannot print in color from my MacBook Pro
I cannot print in color from my MacBook Pro to my hpdeskjet 6122
-
Need help in Line bar combo chart - line is not prominent in dashboard
Hi All, I face an issue where the line in a line bar combo chart is not prominent in Dashbords. lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness
-
I am trying to open a psa file in adobe photoshop cc. How do I do that?
Does anyone know how to open a psa file in adobe photoshop cc?