Need help in Line bar combo chart - line is not prominent in dashboard

Hi All,
I face an issue where the line in a line bar combo chart is not prominent in Dashbords.
lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness. But this scenario does not happen always. if i scroll down or up the browser(here i am using IE8) some of the reports displays line in the charts and some does not display the line. when i click on the report then the line will be displayed.
please suggest whether this is a browser issue ror something to deal with OBIEE itself.
Thanks in advance.

Hi,
It's a bug in obiee11g. kindly download the patch file from My Oracle Support and delpoye it
OBIEE 11g: Line Bar Combo , With Stacked Chart , The Bar Width Gets Affected [ID 1369493.1]
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Symptoms
When the chart type is changed from Standard or Default line-bar to Stacked line-bar chart, the bars are reducing their width.
Line-bar should keep the width of the previous bars.
However, when vertical Bar is changed to stacked vertical, the bar width remains the
same. But when a regular Line-Bar is changed to stacked vertical, the width
changes (reduces, in this case it becomes half the original width)
Cause
For dual Y stacked bar graph, the bar width was half of the regular bar width
because the series assigned to Y2 was given the half of the space also. This is not needed if the marker type for Y2 is not bar.
The following bugs have been opened to handle this issue
Reference Bug:
Bug 12931660 - line bar combo with stacked chart changes its width
BUG:12931660 - LINE BAR COMBO WITH STACKED CHART CHANGES ITS WIDTH
BUG:12947990 - BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Bug Ref:
e.x: applying patch file refer the below file
http://obieeelegant.blogspot.com/2011/11/how-to-apply-patches-using-opatch.html
Thanks
Deva

Similar Messages

I need help importing navigation bars and rollover buttons from fireworks?

I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
Thanks

In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O.

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far.

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!

Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

HT5622 I need help trying to figure out why I'm not able to purchase anythi iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

I need help trying to figure out why I'm not able to purchase anything on iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

I need help trying to figure out why I'm not able to purchase anything on iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

Line Bar Combo chart with Bar-stack in OBIEE

Hi,
I want to create a Line Bar chart with only the Bar as stacked elements.
The bars should be on the Y1 axis and the Lines on the Y2 axis. Different scale on Y1 and Y2.
If I try this in OBIEE 11.1.1.5 answers, all elements (Bars and Lines) will be stacked.
Can anybody help me?
Thanks for response.
M

Line-Bar issue on 11g is not a bug. It’s part of the upgrade - Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
I have not found the workaround yet. If you find it please post on the blog.
Thanks

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

Controlling lines vs bars in a line-bar combo chart

I created a pivot view with 3 measures, and then selected the line bar chart type.
The first 2 measures show up as bars. The 3rd shows as a line on secondary (right hand dise) axis.
Is there any way to make the 2nd measure also appear as a line on the secondary axis, instead of a bar on the primary axis?

Line-Bar issue on 11g is not a bug. It’s part of the upgrade - Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
I have not found the workaround yet. If you find it please post on the blog.
Thanks

Need help animating line art/paths

Help please...
I am trying to animate a line, to have it tween/morph between a line and a question mark and then back to a line. I've drawn my two shapes in Illustrator as line art (as paths, not as closed shapes), but I'm not seeing the paths as a mask when I paste them into my Solid Layer. The parts of my drawing that have closed shapes come in and form a mask, but not the individual lines/paths, not matter how thick I make them. I can see there is a path in AE if I click on the shape, but it does not come up as a masked area.
Is there a better way to do this, than to animate a mask? Animating masks seems to be the consensus how to do a lot of animation, but I'm stuck trying to get my line appear as part of my mask.
Happy to try another way; I have yet to see a tutorial that does what I'm trying to do, can't be a reveal, since the final shape needs to morph a few times. I am sure this is do-able (and probably not that hard!), but I can't figure it out; in Flash I would just tween between the two shapes, but not seeing how to do that effect in AE.
Thank you!

hi, i took some screengrabs also, so that you can perhaps see what i might be doing wrong...i inlcuded the original shape, from Illustrator, as well as what happens when I paste in AE. for my shape, blends won't work from Illustrator, I need the line to move in a certain way that Illustrator won't do using that feature. thanks very much .

Need help.. premiere pro cs4 imports video but not the audio!!

i need help before i fkn suicide..
i'm trying to import a .mpg clip its importing it but with out the audio.
the file is fine when i play it in VLC or WMP
i've also imported it before and it imported fine.. video and audio but now i dunno what the fk is goin on!?!?!?!?
i've tried uninstalling cs4 then reinstalling etc... i've tried the 4.0.1 update etc... i've opened it up in another program then changed it into .avi and still nothing!!!!
it must be something i'm overlooking in settings
HEEEEEEEEEEEELP!!!!

try doing a little research on the hundreds of posts exactly like yours.
Its called the ac3dc3dbs2t32cfgh24.dll codec or something, its in encore and you copy it into premiere. I dont know, ask someone who does.

Hi I am receiving thousands, yes thousands of eMails from APPLE Support Communities, In My inBox there is more than 26.000 eMails from these communities, and i Need Help from you, i will appreciate.I am not panicking but i've ever seen this !

Apple Support Communities
HI
I am receiving THOUSANDS, YES THOUSANDS of eMails from ALL Apple Support Communities.I deleted some one thousand but still more than Normal.
Please i need your Help.This is Enormous!!! I've never seen this happening! It should be a huge mistake that everybody from All Apple Support Communities
sending me their complains? I think it is a big Mistake, or Something bigger, i don't Know! I just need Help in this moment. it's been more than three or four days
i saw a number of eMails from Apple Support communities landing in my eMail address, should this be normal? I don't think so.
I appreciate any Help
Kind Regards
& a Happy New Year

Click Your Stuff in the upper right and select Profile. In your profile there is a link to the right to manage email notifications.

Need Help On Apple Game Center Using Iphone 5 "Not Able To Login"

Iam a new user, 1st click on Game Center it ask to key in my apple ID password. After key In it shows "This apple ID has not yet been used in Game Center. Tap continue to set up your account. Then key in the origin place and birth date and it shows the same again and again. NEED HELP !!!
Any Solution !!
Thanks.

I had this same issue and was able to get in after I changed my Safari privacy settings for accepting cookies from Never to Only visited and then trying to login again.

Need help for my old but good Canon D30 (not 30D)

I have bought 2 cables, and still unable to have my Canon software communicate with camera. I want to put my name on it, or rather, be id'd as the owner. I have done this on my EOS 30D and my EOS 60D. Worked like a charm.
Now, what can I do to get this on my Canon D30 ? Am I using the wrong software ? I understand it's backward compatible but I need help. Please help if you can and I thank you.
Best,
casper_zip

Here I am again:
I loaded EOS Utility on my older Dell with Windows XP. It loaded, and when I connected D30 it was looking for the disk that came with it. Unfortunately, that disk I did not have. Had I possessed it, could have completed my task of adding my name to my camera. The comuter recognized that a D30 was connected to it.
Wonder where in the world will I be able to come up with this needed disk ? My older computer works like new, and I really like XPS better than Windows 7 Professional. I will put out a search on the internet and also on ebay and Amizon.
Thanks so much for your wonderful help. Has me excited, now.
Best,
Casper_zip

Need help AT LINE SELECTION

Hi Guys,
I need ur help regarding my coding: AT LINE SELECTION.
Here is my codes, but it is not working.
AT LINE-SELECTION.
IF ( wa_list-auart = 'ZCS' AND wa_list-auart = 'ZSA' ).
 IF NOT wa_list-sonum IS INITIAL.
 SET PARAMETER ID 'AUN' FIELD wa_list-sonum.
 CALL TRANSACTION 'VF01' AND SKIP FIRST SCREEN.
 CLEAR wa_list-sonum.
 ENDIF.
ELSE.
 IF NOT wa_list-drnum IS INITIAL.
 SET PARAMETER ID 'AUN' FIELD wa_list-drnum.
 CALL TRANSACTION 'VF01' AND SKIP FIRST SCREEN.
 CLEAR wa_list-drnum.
 ENDIF.
ENDIF.
The requirements are:
1. Data selection on column Item + Magnifying Glass Icon click will direct user to transaction code VF01 ====>>its working, but the problem is when i click the line item no 1, it wasnt work. Line item no 1 only but the rest items its workin.
2. Sales Order No (VBAK-VBELN) will be the default value on document column of VF01 if Sales Order Type (VBAK-AUART) = ZCS or ZSA else Delivery No (LIKP-VBELN) will be the default value on document column of VF01. ===>the problem is when i click the line item, there is no default Sales Order No or Delivery NO on parameter 'AUN' <Document column> based on if statement.
3. Warning Message Select a line item to proceed. will be displayed if no line item selected on magnifying glass icon click. ===> help me on how to codes this one if i click to a non line item, there should be a Warning Message Select a line item to proceed.
Thanks in advance.
zhien.

hi joycee
i think one of the command written by u
:-"IF NOT wa_list-sonum IS INITIAL."
shoud be written like
:- IF wa_list-sonum IS NOT INITIAL.

Need help with line-by-line triggering

We have a Basler L104k-2k digital linescan camera interfaced to a NI PCI-1428 frame grabber. We are writing our own custom software using VB6 and NI-IMAQ. We are trying to trigger the image acquisition off of our table motion so that slowing down the table will slow down the shutter speed, etc. We are controlling motion with a NI PCI-7342 servo card and have a RTSI cable connecting the 7342 and 1428 cards. We have been unable to acquire images by line-by-line triggering via the RTSI signal. We have looked at all of the examples we could find on the NI site and still have not been able to get this to work. We are setting up a signal in IMAQ to trigger off of the encoder and route it over RTSI, with some skiptrigger value (say 8000).
We only seem to be getting one line diplayed in the video image. We have used the basler camera setup tool to set the camera to ExSync, Level Control.
We are only allocating one image buffer in IMAQ. We are assuming that the grame grabber takes all of the individual linescans and composes one image out of them. In MAX, we have set the image height to 2048 lines. Any ideas? We have hit the wall on this.

Attached is an example VI for acquiring images from a line scan camera, triggering the start of each image and the individual lines. This is not the most elegant of examples. You will need to declare the appropriate number of buffers in MAX before using the VI. The image is built in PC memory. For example, if your image is 2048 x 10000, then you will need 10000 buffers. If you have any questions, please feel free to contact Graftek Imaging, cbr 512-416-1099.
-Robert Eastlund
Robert Eastlund
Graftek Imaging, Inc.
Phone: (512) 416-1099 x101
Email: [email protected]
Attachments:
Linescan_-_Trigger_Start_Acquisition_and_Line.vi ‏86 KB

Need help, red lines Insignia 46" TV

Hi all,
I am looking for some help. I am having an issue where every 20 minutes or so a red line flickers on the screen for about 1 second and goes away. It is not a full red line across the whole tv. It is longer horizontally but it is not one row of pixles. It varies in size but it is most of the time on the left side of the screen however it moves up and down for where it will appear.
I don't believe this is a cable issue as its happening on all of my devices (2 HDMI connections 1 Component ). The Tv is also less than a month old.
Any insight would be great
Thanks.

This is a very odd symptom. I would start by disconnecting HDMI inputs an see if it still happens with just the component input connected. Still happening? Make sure cables are fully seated. If issue continues, likely a TV issue (you have a 30day window to exchange). If problem goes away, it may be caused by a bad HDMI cable or one of the HDMI sources. It would be a good idea to make sure the connections are clean (blow out any dust in connector) and fully seated. A loose component cable may cause similar symptom as well, all connections should be checked for a correct & secure connection.
-Agent M
I do currently work for Best Buy but my opinions are my own and do not necessarily reflect Best Buy policy. If you find the info useful, please ‘like’ our Facebook page:
www.facebook.com/geeksquadrecon
www.twitter.com/geeksquadrecon

Need help in Line bar combo chart - line is not prominent in dashboard

Similar Messages

Maybe you are looking for