I am having problems w/ FCE-HD accepting M4Ps

I am having problems w/ FCE-HD accepting M4Ps. iMovie has no problem importing M4Ps yet FCE and Sound Track does not seem to be recognising the format. Am I doing something wrong or do you need to convert the files?
Thanks-

welcome,
have a look here, this should help.
http://discussions.apple.com/thread.jspa?messageID=2942095&#2942095
m.

Similar Messages

NEW IN THE FORUM - HAVING PROBLEMS WITH FCE

Hi everyone!
My name is Mauricio and I am having problems in figure out how to use the FCE. I can copy my AVCHD files from my Sony CX100 but once I input it in the time line I can't(or can not find how) edit the frames and also how to mix music tracks with the original sound.
Please, could someone help a FCE beginner???
Thanks a lot for the time and attention.
Mauricio "Big Mac"

Welcome aboard Big Mac,
but once I input it in the time line I can't(or can not find how) edit the >frames and also how to mix music tracks with the original sound.
Normally you don't edit in the Timeline.
You move a clip from the Browser to the Viewer.
In the Viewer you select _in and out_ points to define exactly which part of the clip is required. If you don't define in/outs the whole clip will be entered.
Then move the clip to the Timeline. A simple method to do this is drag the clip in Viewer to the Edit Insert (yellow panel) Overlay of the Canvas. This will drop the clip at the playhead point in the Timeline.
Al

File Error, or, Why I'm Still Having Problems With FCE-HD

so it's been a few weeks since i've had any problems, so why not have some more?
today, i started importing video, and i've had an error message come up during the middle of the importing, and it says "FILE ERROR". this message causes the tape in the camera to freeze, as well as the image on the screen. then the capture stops, and what i had been capturing is not saved.
has this happened to anyone else? what can be done to remedy this problem, if anything?
please let me know. thank you.

Joe,
Could you provide more info please.
Where are you capturing to? How full is that drive?
Are you using capture clip or capture now?
Have you re-tried the capture?
What "Easy setup" are you using?
etc.

I am not having problems with wifi but ipad will not accept my password in the secure mode. anyone else having the same problem?

I am having problems with the Ipad accepting my password in the secure mode in Wifi. I can get into wifi when the secure mode is off. This only started when I downloaded the lastest update for the Ipad. Anyone else having the same problems? I have rebooted the Rotar and still doesn't work.

I am not.
Which secure mode are you using with your wireless network - WEP or WPA?
Have you tried forgetting this network on your iPad, and/or resetting network settings on your iPad? Both will require rejoining the network and the latter will require rejoining every wi-fi network your iPad has access to when returning within range of the network.

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of so

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of something like .mov or mp4. How can I change the extension after the fact and avoid it in the future?

You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

Am I the only person having problems with Verizon's refurbished Androids?

The best way for me to share my issue, is to submit a copy of a letter I have written to Verizon.
I have been a loyal Verizon customer for many years now. I have enjoyed good service until my most recent phone purchase approximately 18 months ago. I purchased an HTC Android, which did not work properly. It was immediately replaced with a refurbished phone from the manufacturer, which also did not work properly. That phone was replaced with another refurbished phone form the manufacturer that did not work properly, but after being given NO OPTIONS, I learned that I would have to live with a partially functional phone. For approximately a year I learned to live with the fact that my date/time stamp would disappear, that sometimes my phone ringer would not work, that I would never get an alert sound when a text message arrived. The worst part of this phone is that periodically it would dump/erase all my text messages. Since Verizon could not solve the problem and since Verizon blamed the manufacturer, I had no options, had no choices. Part of being with Verizon and my crappy phone was forced upon me with a 2 year contract. I would only have to be miserable for one more year. Then one day my phone erased some very important text messages. At this point, I had already spent hours and hours and hours with your tech support, and I decided I needed to try and force a solution. While talking with one of your tech people, I learned that the last phone I had been sent was sent to me with Beta software. The software was so outdated that the phone was not updating itself. In fact we could not update the phone manually. So, the tech person put me into yet another HTC. That HTC did have up to date software, but I was still having problems texting, date disappearing and other glitchy things. So, then the next tech person put me into a Motorola. Leary of droids, I asked for an Iphone but was refused. The tech person told me that I could use my HTC charger for the Motorola, and that he would not be sending me a Motorola charger for the phone. I understood.
So, I’ve been very patient throughout this. I figured I just had a few more months to get through this misery, wait for my contract to expire, get the Iphone. Well, I had not idea that the WORST WAS YET TO COME! So, the Motorola doesn’t charge. I tried charging that phone for 3 days, and nothing. So, back on the phone with your tech support. By the way, whomever reads this letter, I hope that someday you have to go through the tedious phone trees that I had to, only to get to Tech Level 1 which pre-screens, then you have to explain your story ALL OVER AGAIN to level 2 tech support. Of course, I now realize that Verizon thinks that I have hours and hours of time, that it is more important for me to burn 2-3 hours of my time to save Verizon 10 minutes of their time. I now realize just what a low opinion the company has of its “clients.” I actually can’t refer to myself as a client anymore; I think I am one of Verizon’s chumps.
So, back on the phone, more misery, more trips to the post office. This tech person could not believe that the new Motorola was not charging, and when I asked her if I could just get an Iphone, she said, “If you are returning a functional phone with the idea that you will get an Iphone, we will charge your for the returned phone. They will test the phone when it arrives, and if there isn’t anything wrong with it, we will charge you.” WOW. So, not only have I not had a phone that works properly, but I have wasted hours of my valuable time on the phone and running to the post office returning phones, but now I am being threatened by your employee who was implying that I am a liar. BUT WAIT, IT GETS WORSE!   So, she sends me another Motorola, and this phone wouldn’t take a charge either. DO YOU THINK SHE SHOULD HAVE SENT ME A MOTOROLA CHARGER INSTEAD OF MAKING ME USE MY HTC CHARGER?! How much money did you save here, $3 for a charger? So the new phone doesn’t charge, and of course now I am back on the phone tree with your tech support. BUT WAIT, IT GETS WORSE! CAN YOU BELIEVE THAT THE WORST IS YET TO COME?
So now I’m very angry. At some point, after a company FAILS you over and over, at some point you have to take matters into your own hands. I figured I am at that point. I ask again for a Iphone, and they say No. At this point I figure I may have to file a small claims against Verizon or pay off my contract, something dramatic, something that will solve the problem. I am now writing down employee names etc. This all went down last Friday, August 24th. I talked with Deshanee. Deshanee determines that the problem is the charger, but I explain to her that I have been reassured by two other tech people that my HTC charger is fine. I told her I was leaving town and needed this resolved. She said that I needed to go to a corporate Verizon store, and there she would arrange for a manager to give me a charger and charge the phone. Really!   So during rush hour traffic on a Friday, I get to run to a Verizon store and test something that might not work!!!!! Whomever reads this letter (if it every gets read), I hope that someday you have to go through this hell, frantic, running around, not knowing if I will have this resolved before my trip, and the HUMILIATION of having to do a tremendous amount of footwork, wasted time, wasted hours. You people must really despise your client/chumps to put us through this misery and HELL! I told her that that was unacceptable that I wanted to talk to a supervisor. If I go to a Verizon store during rush hour traffic on a Friday, going on my SIXTH REPLACEMENT PHONE ISSUE, I wanted to know the problem was going to be resolved. I am not a lab rat to be sent around town for an experiment. I asked her to get a supervisor and have him authorize me an Iphone. Deshannee reluctantly consulted with a man by the name of Chad (she refused to give me his last name), and he said, “No.”   He did not have any other solution for me other than to run to the Verizon store and test out a new charger. I had visions of me sitting in a Verizon store for 2 hours waiting to see if a phone would charge. At this point I am HATING VERIZON. You have no idea the depth of my anger and resentment towards your company. I wanted to personally talk to Chad, and since it looked like I would have no other choice than to follow my orders from Verizon, I started my way to the Verizon store. By the way, there is a Sprint store within two blocks of that corporate, Verizon store.
So Chad is not available but Denshanee connects me with a very nice supervisor by the name of Mary. Both Denshanne and Mary were courteous and professional, and I do not blame them for anything. I BLAME VERIZON for not giving them any customer service tools to work with. After all I have been through, figure out a way to resolve the problem once and for all. I had to come up with the idea terminating my contract, paying the $200 penalty, Verizon crediting me back the $200, and then I would BUY the ****** IPHONE! I suggested this to Mary, and she said that only the Customer Loyalty Dept could authorize that. So, after being on hold for quite a while, she came back to me to tell me that the Customer Loyalty Department would not authorize it. I was left on my own. Since the Corporate Verizon store would not give me a charger for my phone, I had to buy one. They sold me a Verizon, Universal Wall Charger. More to come on this later. Turns out EVEN THIS ISN’T RIGHT! They should have sold me a Motorola charger. It has taken me weeks to figure out why I can’t transfer data!!!!   So, I have spent hours on the phone with Verizon tech support to try and figure out why this ****** phone won’t transfer data. Verizon tech support was NO HELP. THEY DON’T KNOW. So, I had to call Motorola tech support to find out that Verizon’s Universal Wall Chargers are not used for data transfer. If you people were actually trying to drive me crazy, intentionally, I would be afraid for my life. If this is your level of competence when you are trying?
I went on my trip and of course, when I arrived in Europe, my phone did not work. I had to get on your tech support again, and it took 2 hours to trouble shoot the problem. Even though I had called several times to ensure my phone was international ready, to make sure I had a calling plan and a data plan, no one bothered to fill my requests. I believe I should record every phone call to Verizon, document everything. So, even after I got on a data plan, I received alerts that I was mounting over $1,000 in data roaming charges. I had to call Verizon several times from Europe to remedy this. You people just love making things hard. I hate Verizon.
So, my new Motorola does not transfer data to my computer, for a reason I am not sure of, but Motorola claims I have the wrong USB cord. I requested a car charger and was denied that today by your tech support person, Vondra. She said that Verizon only warrants phones, and that we have to buy the chargers and such. Yeah, of course Verizon doesn’t; that would cost you $3? So, I called the Verizon corporate store on La Cienega, the store that refused to give me a charger, that made me buy one (one of your tech people did credit me back for that BTW). I spoke with the manager, Vanessa. She said that they don’t carry Motorola chargers. They sell the phones, but not the chargers. I explained to her about the data transfer problem I was having, and she suggested I buy a memory card reader. GREAT. So, Verizon’s solution is to abandon the idea of having the proper equipment, piece meal a solution and yes, make me pay for it!
So, another item, which your tech support cannot solve, is that the phone does not work while it is being charged.   So, I called tech support again, asked to speak with a Supervisor. I was put on hold for a long time, and the tech support person came back and told me that there were no supervisors available and that one would have to call me back. I asked her the name of the supervisor that is supposed to call me back, and she said, “Alvin.”
So, a day has gone by and no call from Alvin. I doubt he will call. Your company is obviously going through some rough times. I am sure that within a few months, Verizon’s incompetence and failings will start to be reflected in your ratings
I have visited the Sprint store, and I am familiarizing myself with what they have to offer. Early next year my contract expires, and most likely I will leave Verizon. I should take you to small claims court! Most of all, I so much regret all the people I referred to you, dozens. I talked up your network, I told everyone how happy I was with the service. I was your advocate. No longer, and I am not putting the same effort into letting people know how horrific Verizon has been with me during these last 18 months. I am counting the months until my contract expires. I will limp along with this broken phone until my contract expires, just has I have done with all the other defective phones Verizon has provided me with. For a year my HTC phone ran on the first generation software, and I managed to just use it as phone, nothing much more, and that’s what I’ll have to do with this ****** piece of crap.

I believe you, Ihave been a subscriber for over 8 years and over that period of time I have has some phones fail. This I can accept and understand, however the policy of Verizon of only sending out recertified phones is a joke. I have had over 10 replacement phones sent out to me an none have actually lasted more that 1 month. Last year this went on and on, I was able to fix this by upgrading to the samsung stratosphere.   My son's Pantech phone failed and was replaced several times and to resolve this, I ended up purchasing a replacement from Amazon.
My worked fine at first, then the internet started to get really buggy and hard almost impossible to connect. I was very hesitant to have them send a replacement because of my experience with the replacement phones, however I had to concede because I could not connect to the Internet. I was assured that the replacement would undergo a 100++ point check. It arrived and I was happy with it, however a week later, it stopped charging. I spoke with a supervisor and the options he had for me was 1. keep going thru the warranty replacement process, 2 they will send me a downgraded phone (a 3G, unlike the 4G that I bought) or 3. they will buy it back for ... wait for it...$68. Another supervisor told me then they will have to keep sending out phones, every week if needed.
As expected the replacement phone failed again, and out of frustration I called again and they connected me to a manager immediately (my account is flagged because I filed a complaint with the BBB. And for once I got a helpful person, he told me they could not ship a new phone, but a different brand, the Motorola Droid 4, I said I want to keep the Stratosphere because of the car dock and desk dock, he said they would give me new docks as well. This seemed like a good deal, so I accepted. The Droid arrived and I was setting it up, transferred the sim, the 32 GB SD card, contacts and all. I noticed that the sim was not registering, it showed no data, I tried to remove it and it BURNED my hand, needless to say it fried my SD card with all the data, photos, etc....
When I was using a basic phone, this was not a big problem, just move your contacts and you are done. With smart phones this is a lot harder, you have to load all the apps and settings again. My stand is that I am paying $200++ a month for decent service... not even perfect, just decent. I get defective phones and Verizon is not willing to rectify this. I spoke with someone from the executive office of verizon and basically her answer was to keep replacing the phones until one works,, buy an new one at full retail price or get it from a third party like Amazon or Ebay....or...get this since I am 5 months away from my upgrade date, they will LET me do an early upgrade to any non apple product, but PAY an early upgrade penalty.
Right now I think that I will use one of my phones, BUT I will aside from the complaint with the BBB, I am filing a complaint with the FTC. I wrote this on the forums a few weeks ago, but of course no one from Verizon will have the B@ll$ to answer this.
Message was edited by: alexander ruiz

Having problems installing PE 2.0 on new hard drive

I'm having problems as I stated. I'm running Windows 7 Ultimate 64bit and had PE 2.0 on the last hard drive. This is a new hard drive, the welcome screen appears, I get the accept license screen and then the installation screen. As soon as I click install Photoshop Elements 2.0, the DVD-ROM drive spins down and stops. I tried using compatibility mode with no success either. I know there are more P E's out there. I own PE 12 too and I want to put 2.0 on the drive for simple things before putting on PE 12.
Any help would be appreciated!

How big is your new hard drive?
If it's not over 1 TB, then try copying the contents of the cd to to your hard drive and then in the Adobe Photoshop Elements folder, right click
on the Setup.exe and choose Run as Administrator
Also, turn off the real time scanning for your virus scanner before installing, just make sure your disconnected from the
internet and don't forget to turn your your virus scanning back on after installing pse 2.

MBP 2011 died and having problems reinstalling Mac OS

Hello,
Having problems trying to make my MBP start working again...
Tech info:
Early 2011 MBP, 10.6.6 preinstalled Mac OS X
2.3GHz Quad-core Intel Core i7
8GB 1333MHz DDR3 SDRAM - 2x4GB
256GB Solid State Drive
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
MacBook Pro 17-inch Hi-Resolution Antiglare Widescreen Display
Was full updated up to date 3-4 days ago, so probably it was 10.6.7 before the crash.
I am pretty new to Macs and english is not my first language, so please excuse me if i use wrong terminology. Thanks.
It is pretty long story, the problem is - i can not install Mac OS X and make it work. The at the moment description of the situation is in Part 6, so you might want to skip parts 1-5, although reading those might be needed to understand the source of the problem or some details.
The Story:
Everything worked great for about a month but then multi-language kernel panic windows asking me to reboot computer poped up. Reboot didnt help and it kept asking me for more and more reboots after like 1 minute after it logs in into Mac Os.
I had 3 programms(among others) installed: Kaspersky(fully updated trial), Parallels(activated a month age oem version, runing Windows 7 as a virtual machine without using Bootcamp) and virtualbox(activated 2 weeks ago, not being used or opened for ~10 days).
Part 1 - After logging into Mac OS 2 messages always pop'ed up:
1) Kaspersky couldnt lunch in previous Mac OS startup(not current)
2) Parallels message: Its time to choose either to use trial Parallels or to enter activation key. Thats really weird because it was activated a month ago, was fully updated and worked great every day. When i tried to activate it again it just didnt accept the key which was accepted last time: the icon was still grey and not clickable, rechecked 10 times at that moment.
Ok, decided to uninstall both Kaspersky and Parallels via Safe Mode. Safe Mode is working fine. Removed programms by dragging them from application folder to trash can. Worked fine. Logged into normal mode. No messages appear except the "Hello, you had kernel last time", but still Kernel appear in 2-3 minutes. Logging in 32b mode(by pressing 32 while booting up) doesn't help either.
Part 2 - Rebooted. Booted from boot DVD and used Disk utility - nothing is wrong.
Went to safe mode again. Found Kernel Log and it showed me that the source of the error was some file of VirtualBox(at least it has virtualbox in its name. Virtualbox itself, again, wasn't launched for like 10 days) located in /extension folder. Removed virtualbox program by dragging it from applications folder to trash. Worked fine, but those files in /extension folder weren't deleted. I am pretty new to Macs, so i wasn't sure if those are really VirtualBox programm's files or Mac OS system files, so i decided to reboot and check if the problem still not fixed.
Result: You cant boot neither in normal mode or in Safe mode. It just doesnt react on anything.
No backups. Great.
Part 3. Booted via boot DVD. Worked fine. Checked if disc was ok - it wasn't ok. Tried to repair - cant repair, suggests me to reinstall.
Made a backup on external HDD(have it atm, so iа you need any info i can get from that backup to help you guys understand what happened - ask and i will give it to you asap).
Erased internal HDD with zeroes(1 row), it still has 4 files on it(around 300 mb), probably those are the files copied from Boot DVD, but i am not sure.
Part 4. Tried to install Mac OS from boot DVD. File system is for Mac os with journaled option activated. Installation process starts fine but at some point(around 25-30% while telling me its around 30 minutes left) the error message appears telling mу the installation couldn't be continued because it cant copy some files from DVD(no particullar files mentioned). Advising me to reboot and try again. Same thing happens always.
DVD disk was never used and even not unpacked before, looks fine...
Part 5. Inserted the boot DVD in another mac, made a copy via disk utility in mac os(without booting using this disc), copied it to external drive where the backup is. So there are 2 files on external drive: backup.dmg and starupDVD.dmg.
Pulled in the external hdd to MBP and tried clicking option key to choose him to boot from HDD. Nothing happens, just mouse appears without any windows where i can choose the boot option. Weird. Tried all 3 usb ports, same problem. Tried to put the DVD disk and click option key - both mouse and window appears, but only DVD boot option avaivable.
Tried to reset RAM by clicking Command-Option-P-R keys. Reset went fine(the sound and so on), but it didn't effect on anything.
Part 6(this very moment): So here i am. Have erased internal HDD with 4 files in it(around 300 mb, dont know what), boot DVD which came along with MBP with 10.6.6 MaсOS, external HDD with the same DVD and backup.
Disk utility says my internal HDD is ok.
Clicking option key doesnt make my MBP see external HDD while it is plugged in any usb port, only mouse appears. Same option key sees dvd disk if it is plugged in and boots normally.
You can see and work with external HDD if you boot from boot DVD.
Installation process starts both fine on internal and external HDDs. On internal it crashed with "cant copy files" message at ~20-30%(~30 minutes left), on external the screen just turns grey with moveable mouse on it without any messages at around 30%(~40 minutes left).
External HDD - Western Digital My Passport Essential SE 1TB USB 3.0
Internal HDD - 256gb SSD which came from Apple (sorry for calling it internal HDD)
Think its pretty much it...
What should i do to make this thing work? Pretty much desperate already.
Thank You for any help.
Sincerely yours,
Alexander.

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

Using VoIP and can not send or receive fax. I am now also having problem scanning

I use VoIP for phone service. I can not send or receive faxes although the Fax Test Report Pass. Now I am having problem scanning. My main concern is with faxing.

Hi,
This won't work for analog fax. You need a normal analog telephone line to fax this way. Please check the following article:
http://hylafax.sourceforge.net/docs/fax-over-voip.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sorry for my ignorance but i'm having problems printing

Hi
I am very new to indesign and to print graphics. I am not new to web graphics.
I am having problems printing a document that I have created in InDesign CS5. Now I have learnt that I need to calibrate stuff with ICC profiles but I am not sure what I am doing.
Do i need to create aan ICC profile for my monitor and printer?
How do I get these to worl with InDesign?
I suppose I need to tell you what is going on. When I print my document which is mostly different shades of grey, most of the different grey shades are nearly black and I can only just see the differentces in shades between the grays. Now on my monitor they are distinctly different and can easily be seen.
So what steps do I nee dto get these colours right?
Cheers

For good reproduction you need an accurate monitor profile (this is done with a colorimeter or spectrophotometer --that's overkill for just the monitor, but it can do the printer, too -- and profiling software) and an output profile for the printer and paper combination. The industry standard EyeOne colorimeter package is around $200, the spectrophotometer will cost quite a bit more.
There are services that will profile your printer for you, too, but learing to do it yourself will cost less over the long haul if you are really serious about the output quality. In theory you need to recalibrate and profile printers on a regular basis, especially when you change ink or toner. Out here in the real world, though, I suspect most of us who are not producing commercial color output just do it once and live with it until the results are no longer acceptable and the profiles need to be updated. I proof for internal use on my color laser, for example, and it hasn't been re-profiled for about three years. It no longer matches waht I see on the monitor exactly, but it's still fairly close and the prints are for my own use. I always get a proof from the printer when it's time to go to press.
Of course not all monitors and not all printers are created equal. Some monitors are incapable of showing fine gradtions in sahding in the dark or very light grays, and many, if not most, printers can't capture all of the shades you can see on screen.
For any given printer resolution, such as a 600 dpi printer, the higher the linescreen value used to print, the lower the number of shades that can actually be produced. Halftone spots (which is what are used to fool you into seeing gray using only black ink) are made up of groups of printer dots, and you can't print half a printer dot, so, for example, 600 dpi printer outputting at 100 lines per inch linescreen, uses about 36 printer dots to make each halftone spot (it might be a little different because the shape of the halftone spot is seldom a square). The best you can get from 36 printer dots is 37 levels (no dots to all dots), so the best you can hope for is about 3% steps.
Add in dot gain, the spread of ink or toner as it's absorbed into the paper and which is more prominent at darker shades, and your shadows tend to plug up, and the very light shades may not show at all. Less than 5% dot, for example is extremely hard to print on most lasers.
A really good book on the subject is Real World Scanning and Halftones, and a great book on color management in general is Real World Color Management.

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Having problems with USB cable, please HELP!

While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!

Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Having problems with key chain password

I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?

There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam

Having problem with my hp officejet j6480 all-in-one printer

i am having problem with my HP officejet j6480 all-in-one printer it prints very slow
the operating system is windows 7 32-bits i download full driver software but that did not fix the problem
This question was solved.
View Solution.

Hi - Does it print slowly from all applications or just certain ones? In either case, you can try following the steps in this document.
In addition, try going into Control Panel, Printer, right click on the printer and choose Printer Properties. Click on the Advanced Tab and select Print Direcly to the Printer.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

FCE was discontinued nearly 3 years ago and is no longer supported.
I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
Final Cut pro X and iMovie are the only Apple apps that are supported.

I am having problems w/ FCE-HD accepting M4Ps

Similar Messages

Maybe you are looking for