I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?
Tango Remote Control Music Player HD
I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?
An iPod touch is an iOS device.
Why not contact the developer of the app?
Similar Messages
-
I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other. Do I need a different Apple ID for one of the devices in order to do that?
I found this on a related question in the Community:
Yes you can do it. I do it with 4 different devices all using the same Apple ID.
You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
Take a look at this for more information.
The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern. If this other post is correct, how to I set a different "contact at" in the iPod Touch?
Goose -
I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.
"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print! -
Hi!
I have a iPod touch 8GB 5.0.1 and my contacs my app store Are not on the home screen and my contacs .
So I go to restrictions and they say that they are ON so I reboot my iPod and he still the same thing.
So I restore my iPod from iTunes and iTunes say that this iPod cannot be restore and I do that on a MacBook pro and I do the second time on windows computer.
So I need help , I don't know what to do .
Thank you .The app, if not restricted, may be hidden in your folders. If you go to settings, general, reset, reset home screen layout, you can rule that out.
Does your restore give you a specific error? If so, see http://support.apple.com/kb/TS3694 and http://support.apple.com/kb/TS1275
You can also restore from your iPod, by going to settings, general, reset, reset all content and settings, but make sure that you have created a backup beforehand.
About iTunes backups:
http://support.apple.com/kb/HT4946
About iCloud backups:
http://support.apple.com/kb/HT4859
If you are still having issues, you can always try to contact AppleCare
Seth -
Due to having a gen 2 Ipod, I can't download any apps from the app store. Plus, many of my previously downloaded apps (that I bought) aren't working...so I can't even re-download them since I still have 4.2.1. HELP!!! Rediculous that I can't use apps I paid for on the same device that I purchased them on.
<Edited by Host>A 2G iPod can only go as high as 4.2.1
Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync. -
8GB ipod touch keeps freezing up and won't run apps correctly
I have an 8GB ipod touch that is almost a year old and it keeps freezing up. Some apps that use the motion side to side to move objects, doodlejump for example, won't work. I have reloaded apps and restored the ipod and it is still having a problem. What would be the issue and can it be fixed?
If the restore you did was from backup. restore to factory defaults/new iPod since you may have corruption that is now in your backup. If you then still have problems I wold make an appointment at the Genius Bar of an Apple store. If they determine it is a hardware problem and it is within warranty they should give you a replacment iPod.
-
iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??
Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
No need to fret....
Cheers,
GB -
I've got a 4th generation iPod touch and I'd like to use the apps in a Mac. Is it possible? How?
There are a lot of interesting educatives apps for iPod touch that don' exist for a Mac and I'd like to use them in my Mac. How could I connect the Ipod to a Mac in order to see and use the ipod apps in the Mac?
Mac Operating System Lion
iPod IOS5
Thanks.Are you sure you are following the instructions correctly? Placing the iPod in recovery mode wil allow you to bypass the passcode lock. If it's still asking you for the passcode, you aren't doing something correctly. Keep trying.
If no luck there, try DFU mode as well.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
How many Apps can i have on my iPod Touch, is there a limit?
Is there a limit on how many Apps i can have on my iPod Touch?
Thanks in advance.Thanks a lot, that was very helpful.
I am pretty sure that there's 16 Apps per page,
so...16 X 9 = 144 - 13 pre installed Apps.
131 total available (slots) for Apps. -
My Iphone will not let me download apps because it says my apple id is disabled, I have changed my password four times and it still is saying the same thing. What do I do now?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.
Hello there Sweebs44,
It sounds like you are tapping the Game Center app to open it, but the screen is blank. I recommend signing out of your account:
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph6c493cac
Then close all the running apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone sign back into your account and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling -
help i have updated my ipod touch to 4.3.3 and itunes to 10.3 and now it wont open on my pc i can access apps but no music as it cant sync help! itunes wont open at all or reconise the ipod
Try to remove all Apple related software and then reinstall iTunes Removing iTunes, QuickTime, and other software components for Windows Vista
-
I recently got my daughter an iCess RC helicopter. It works via bluetooth and can be used with Apple and Android devices. She has a ipod touch, but when trying to do a search for "iCess" in the app store, nothing comes up. It shows up on my PC in the itunes store, but how do I get it on the ipod touch or its apps store?
Also having the same problem when trying to locate the app with my iPad and its app store. I got it installed on one of my android devices via the Google Play store so I know its there & works. Any ideas or suggestion on what is going on here with the iPod and iPad app stores?The RC helicopter's directions say its available in the App store for Apple and here it is in the iTunes store:
https://itunes.apple.com/us/app/icess/id558793179?mt=8 (released on 6/19/2013)
How do I get this to show up on my iPad and/or iPod touch app stores so I can then download and install it as needed? -
My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?
Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob -
I have had an iPod Touch 3rd Gen for two years pretty much and the apps have worked fine. Suddenly when I go on an app it appears to launch then just exits. I tried turning the iPod off and on again, but that made all my apps behave like that. Settings and those things work fine still. Should this suddenly happen? I dont want to lose all 204 apps.
- First try resetting the iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try downloading/installing a new app
- Restore from backup
- Last, resore to factory defaults/new iPod. this is last result since you will lose app data.
Maybe you are looking for
-
Error Transporting PI (XI) Web Service Datasource from BI BW 7.0
Hi all, I have a PI (XI) datasource in development. While transporting this datasource from Dev ==> QA, the transport keeps failing. If the datasource is active (BI 7.0), it should be transported to QA without any dependency with other objects? PI (X
-
Not able to open XMind files from IE in read only mode
I have configured my SharePoint Farm to support .xmind file types Below are the steps I have done 1. Added an entry in DOCICON.XML <Mapping Key="xmind" Value="xmind_file1.png" EditText="XMind Mapping Software" OpenControl="SharePoint.OpenDocum
-
Serveroutput in the command window of PLSQL Developer
In sqlplus, I input the following SQL: SQL> set serveroutput on SQL> show serveroutput serveroutput ON SIZE UNLIMITED FORMAT WORD_WRAPPED SQL> select /*+ no_index(t1 idx_t1) */ * from t1 where n=3; N 3 SQL> select * from table(dbms_xplan.di
-
Newbie: Nested table type problem
<< accidently posted the quiery twice >> Message was edited by: user575882
-
GroupWise eMail Not Delivered.
Hi, I have a server running MTA/POA both at 7.0.3. A user in the PO has just sent an email with excel attachement(48k) to several users, over many other POs, and his own. Most useres recieved that email. However two didn't. The two who didn't get the