I am one of many who were frustrated at the loss of visible keywords in Lion.  Will the new Mountain Lion solve this problem?

I an one of many who were frustrated at the loss of visible keywords in iPhoto in Lion.  Will the new Mountain Lion solve this problem?

I'm not sure whether we are quite talking about the same thing? 
With iPhoto in OSX 10.4.11 all the keywords were visible in the iPhoto library.  When I moved my photos to a computer with Lion I lost this feature, there was a lot of discussion at the time about this being a backward step by Apple.  So I wondered whether the Mountain Lion version of iPhoto has restored this feature?

Similar Messages

  • I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    You can solve this problem. Just follow these instructions:
    http://support.apple.com/kb/ht1212

  • Hello guys..!! I have got my new  iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

    Hello guys..!! I have got my new  iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

    Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
    This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

  • After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

    After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

    Do you have a bootable clone from prior to the update? If so, roll back with that.
    Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
    Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
    By the way - what update was it that caused this problem?

  • HT201210 i have a problem with my iphone 4s when i update the system its giving me error 36 ? and the phone docent want to open! any one please know who to solve this problem

    I cant open or upate my iphone 4s because its give me message erorr 36, please any one know what dose it mean erorr 36 and who i solve this problem.

    Hi mohamed00,
    Thanks for visiting Apple Support Communities.
    I recommend following the method below if you are not able to restore your iPhone and see an "error 36:"
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Cheers,
    Jeremy

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • When i close firefox and want to use it later i get a warning saying cannot open firefox close it first this keeps happening all the time any ideas to solve this problem? i have 2 mchines one on xp and one on windows 7

    i have 2 pcs one with xp and the other with windows 7 heres the problem
    when i close firefox and say go back to it say in 10 mins i get a error message saying to close firefox before opening!!! but firefox window is closed but the processes still say its running in task manager so to correct this i have to end process on firefox. this seems to be happening now every time in the last few days i have upgraded firefox to the latest version. any ideas on how to solve this problem.

    see if this helps you : [https://support.mozilla.org/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding Firefox is already running but is not responding]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Anyway to solve this problem?

    I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Hence you do not know exactly which line the caller called.  If you answered using the wrong phone, then anyone calling the other number will not get through.  Anyway to solve this problem?

    Hey David Koh TP,
    Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
    Connect your iPhone, iPad, and iPod touch using Continuity
    http://support.apple.com/kb/HT6337
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
    Thanks,
    Matt M.

  • Iphone 4 is hiting in ios 5.1.1. any one know how to solve this problem??

    iphone 4 is hiting in ios 5.1.1. any one know how to solve this problem??

    This sounds like a hardware problem and should be taken to Apple if the heating / "hiting" becomes disturbing to you. If you feel that your iPhone has a heating / "hiting" problem and needs to be repaired, please contact Apple Support and they can further assist you in having it inspected, repaired, or even replaced. In the past, the overheating of Apple products has been known to cause harmful problems to a few particular users. Please evaluate your situation and take further action if you feel necessary.
    http://www.apple.com/support/contact/

  • One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

    I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
    I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
    I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
    Windows 7 and iPad 2
    Kind regards,

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB.  some one could me help to avoid installation of 590MB for my new mountain lion software???

    Hi guys..!!
    I would like to know if someone could help on this:
    I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
    If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
    Some one could help me how to avoid installation of 590MB for my new mountain lion software???
    Thanks

    If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
    On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
    If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
    This article lists all of the printer models for which Apple distributes the driver:
    http://support.apple.com/kb/HT3669

  • I have not able to connect with itune store via proxy server - I have upgraded the itunes 11.04 version - Any one knows how to solve this problem

    Appreciate if any one help me out to solve this problem ?

    Open the Keychain Access in the /Applications/Utilities/ folder and create a new keychain, giving it the name login.
    (25187)

  • I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

    I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
    I saw the below quote on Adobe forum
    "You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
    If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
    If possible please send the advise to my mail id: <Removed by Moderator>
    Thanks
    Uvaraj S

    I already answered that.  If you purchased a Suite then you can only install and activate it on two machines.  Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite.  You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
    If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time.  If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again.  I do not remember if there is a limit to the total number of activations you can process for the life of the software.

Maybe you are looking for

  • LabVIEW Driver Support for an Agilent 4263B LCR Meter?

    Hello All, Has anyone interfaced with an Agilent 4263B LCR meter in LabVIEW?  I can interface with the GPIB port using an NI USB-to-GPIB converter, but are there any support VIs out there to make the programatic interface easier? Any help would be m

  • Photoshop elements 11 problems

    I downloaded elements 11 trial version and can't open the organizer.  I get a message:  The catalog could not be opened.  An internal programming error occurred.  I can use the editor but can't access my pictures after I edit them.  I have Windows XP

  • Unaccountable space at the beginning of a HTML document.

    I've designed and developed a website using Skeleton boilerplate and Perch CMS, and it works perfectly in all desktop browsers I've tested it in and almost does in Firefox 18.0.1 for Windows XP. When I browse the site and click on the news page (http

  • Where and how can I download JRE?

    I want to run Java bytecode applications, I need the interpreter for running bytecode. Where can I find it? Thanks beforehand!

  • Cannot install yosemite - segmentation fault

    I downloaded Yosemite from Snow Leopard, however the installer consistently crashes with a segmentation fault on the main thread. The installer comes up with a list of the PPC application that will no longer work under Yosemite and upon pressing 'con