I am receiving Basic Idoc Type error while I am executing SWO1 for BKPF

Hi
I am receiving Basic Idoc type error message while I am trying to test BKPF object. Please note that the Business Object is delegated to a custom BO. Can anyone tell me where the linkage is established between IDOC type and BO.
Thanks
Arghadip

Arghadip,
  Can you check the transaction WE57?
Thanks

Similar Messages

  • EDI 821 and EDI 823 field mapping file and basic IDOC type and message type

    Hi All,
    We are facing some issues regarding EDI 821 and EDI 823 file mappings.
    We are mapping EDI 821 and EDI 823 transactions into SAP using IDOCs. Currently we are using the below entries
    EDI 823 - Lock Box
    Basic IDOC type - FINSTA01
    Message type - FINSTA
    Process Code  - FINS
    The problem is we are able to get the IDOC into SAP with status red and the various errors were due to not able to create the lockbox entry in SAP and once we got yellow status also but the lock box entry was not created and the errors are like No Conversions,no header etc.
    EDI 821 -
    Basic IDOC type - PEXR2002
    Message type - PAYEXT OR REMADV
    Process Code  - PEXC OR REMA
    We are facing the same problem here also and the internal payment order is not creating in SAP and IDOC was generated with yellow status and red status.
    We are trying different combinations but nothing is working so far.
    I need the following things to proceed furthur.
    1)Are the IDOC , Message and process codes are correct that I am using now for both EDI 821 and EDI 823
    2)If those are not correct, can you please let me know the correct entries
    3) Please provide me the field mapping if any one of you have worked earlier for both the above IDOC and message type or new ones and we have one field mapping now but if you can send it to me then  I can re check it.
    4) Do we have to create any configuraion or customizing in SAP to create the IDOC in green status and if so please let me know the customizing steps and procedures for both EDI 821 and EDI 823.
    thanks in advance for all your help.
    Please let me know if my question is not clear.
    Thanks,
    Ramesh.

    Hi Ramesh,
    I believe you are using those interfaces with the business partner type as Bank, Whatever idoc type, message type and process code you have used are perfectly correct.
    First of all did you enable your bank for EDI, the house bank has to be EDI enabled first then only your idoc's can be processed, talk to your fi functional consultant and he might help you.
    Are you can give me the exact error and i can help you as well.
    Thanks,
    Mahesh.

  • Receiving the internal 500 error while testing java web service

    HI,
    Problem Summary:
    Receiving the internal 500 error while testing java web service in integrated weblogic server.
    my scenario is like,
    retrieve the Payload from Dehydration tables.
    We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
    I had verified in my Jdeveloper,Proxy settings are available.
    Error Payload:
    I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
    An exception occurred while retrieving the response for https://192.168.0.41:9102.
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
         at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
         at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
    Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
         at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
         at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

    An exception occurred while retrieving the response for https://192.168.0.41:9102.
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
    Regards,
    Anuj

  • Inconsistent FOTY0001: type error while  using translateFromNative

    I am getting FOTY0001: type error while using translateFromNative function in assign activity.
    This error happens only in the below scenarios:
    1. Create a BPEL process with file input adapter that accepts simple xml string as input and accepts files like input*.txt.
    2. Create a simple XSD(Fixed Length native XSD) and convert the simple string to XML using translateFromNative function and copy it into a variable.
    3. Switch off the process
    4. Put atleast 10 input*.txt files in the folder and switch on the process.
    This error doesn't happen when I put one file at time.. Even when I put multiple files, the error happens for few instances inconsitently.
    Here is our assign activity
    <assign name="Assign_1">
    <copy>
    <from variable="PlantChemMsg" part="Chemistry"
    query="/ns2:Chemistry/ns2:chemistryString"/>
    <to variable="tempChemistryString"/>
    </copy>
    <copy>
    <from expression="ora:translateFromNative(bpws:getVariableData('tempChemistryString'), 'ChemistryLegacy1.xsd', 'Root-Element')"/>
    <to variable="ChemistryOut" part="Root-Element"
    query="/ns8:Root-Element"/>
    </copy>
    </assign>
    Here is the error in group log:
    ORABPEL-09500
    XPath expression failed to execute.
    Error while processing xpath expression, the expression is "ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')", the reason is FOTY0001: type error.
    Please verify the xpath query.
         at com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate(BPELXPathUtil.java:206)
         at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:679)
         at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:143)
         at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
         at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3705)
         at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1654)
    Any help would be appreciated. Thanks.
    -Sridhar

    James,
    Thanks & Sorry for the late reply.
    I used assign activity just because I have only one source and target element.
    This error happens even with transform activity.
    Also, all the input messages are same. So It is definitely not the issue with the input message.
    One observation I did is:
    The error doesn't occur when I use like below(Full Http url):
    ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'http://psc-d674943.hdq.uss.com:7777/orabpel/default/TestTranslateFromNativeError/1.0/ChemistryLegacy1.xsd
    ', 'Root-Element')
    But occurs when I use like below.
    ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')

  • Basic IDOC types

    what are these  ORDERS05, DELIVERY03 & WMMBID02
    i found that these are basic idoc types. what does it mean?
    Regards,
    pandu.

    Some IDoc types are supplied by SAP in the standard system,
    these are the basic types. Other IDoc types are customer
    extensions. In these cases, a basic type is combined with
    an extension which is created by the customer, according to
    certain rules. Unlike customer extensions , these extended
    basic types are upward compatible.
    regards,
    srinivas
    <b>*reward for useful answers*</b>

  • Adding a segment to a Basic IDOC type

    Hi every one,
    How do i add a segment that I have created to an existing Basic Idoc type ?.
    Can some one give me a solution for this.
    Thanks,
    Arul.

    hi ,
    Idoc extension can be done with 4 steps
    1. creation of new extension type and a new segment
    2. creation of a idoc type
    3. link idoc type to message type
    4. check the idoc type.
    1. creation of new extension type and a new segment
    we30--idoc typesobject name-extension type-create-create new-create-place the cursor on the location
    2. step:
    we30----
    3. we82 or we 30
    4. WEDI
    If you find it useful plz mark the points
    Regards,
    Naveen

  • How to Create IDOCs for a Custom Basic IDOC Type

    Hi friends,
    I Have a Custom Basic IDOC Type.
    For that IDOC Type i need to Create an IDOC for every Header Item.
    The Header Item may have variation (Different) number of Line Items.
    in this case can i Use
    MASTER_IDOC_DISTRIBUTE and create the Idoc for each Header Item.
    or is there any way to create the IDOCs
    Thanks in Advance.
    Ganesh.

    Hi ,
    If I am not wrong you need to pass data via fm "MASTER_IDOC_DISTRIBUTE".
    So you can transfer row by row data into SDATA filed of structure type :EDID ,
    by concatenating the data into one field of type sdata. and passing it into the fm.
    I.e defining a internal table of type EDIDD.
    Try this :
    DATA : itab TYPE TABLE OF edid,
           itab1 TYPE TABLE OF edidc.
    LOOP AT itab2 INTO wa_itab2.
    CONCATENATE wa_itab2-t1 wa_itab2-t2 wa_itab2-t3 wa_itab2-t4 wa_itab2-t5
      INTO result.
      itab-sdata = result.
      APPEND itab.
      all function 'MASTER_IDOC_DISTRIBUTE'
       exporting
         master_idoc_control                  =itab1
      OBJ_TYPE                             = ''
      CHNUM                                = ''
       tables
         communication_idoc_control           =
         master_idoc_data                     =itab.
    EXCEPTIONS
      ERROR_IN_IDOC_CONTROL                = 1
      ERROR_WRITING_IDOC_STATUS            = 2
      ERROR_IN_IDOC_DATA                   = 3
      SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
      OTHERS                               = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Basic IDoc type ORDLGT01 is unknown

    Hi All,
    When I test run to execute  business object from BUS2032 from SWO1,
    I got the following message:  "Basic IDoc type ORDLGT01 is unknown".
    Please let me know why its so happening.
    Regards
    Bhaskar

    PLEASE SEARCH SDN before posting ([rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement])
    [SAP Note 607330 ALE: Basic type ORDLGT01 unknown|http://service.sap.com/sap/support/notes/607330]

  • Restructuring the basic IDoc type DELVRY03

    Hi experts,
    My rek  is to restructure the Basic Idoc type DELVRY03 for outbound delivery.
    I am using IDOC_OUTPUT_DELVRY.
    Is there any exit or badi for this.
    Thanks

    we31:
    Create your new segment.
    Save and remember release (edit-set release)
    we30:
    Create your new idoc type. Create like extension.
    In your linked idoc type fill your standard idoc type.
    Press create new sement button for add segments and put your Z segment created in we31 with min and max quantity.
    Save and release the idoc type
    Regards

  • Basic idoc type for asset creatioon and asset acquisition

    Hi
    Please can anybody tell me the basic IDOC type provided by SAP for
    - Asset creation
    - Asset acquisition.
    Thanx in advance....

    Hi,
    Go through this link
    http://www.sap-basis-abap.com/fico/configuration-in-asset-accounting.htm
    help.sap.com/bestpractices/BBLibrary/documentation/B44_BB_ConfigGuide_EN_Nordics.doc
    Reward points if found helpful...
    Cheers,
    Chandra Sekhar.

  • Diff between IDOC TYPE & Basic IDOC TYPE ?

    what is the Diff between IDOC TYPE & Basic IDOC TYPE ?

    Hi,
    IDoc type contains basic IDoc type and extension.
    Extension is a sub-object which extends an existing basic IDoc type. Extension types are not delivered by SAP. They can be created by the customer.
    Regards,
    Ferry Lianto

  • Hi gurus what is basic IDOC type

    hi gurus what is basic IDOC type

    Basic Type:
    Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
    Segments:
    Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
    Steps in creating Segments:
    T.Code WE31
    Enter the name for your segment type and click on the create icon.
    Type the Short text.
    Enter the variable names and data elements.
    Save and Go back.
    Go to Edit -> Set Release.
    Repeat the steps to create more segments.
    IDOC TYPE:
    Business data is exchanged with an external system using the IDoc Interface.
    IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
    Steps in creating IDoc Type:
    T.Code WE30 to create IDoc Type.
    Enter the Object Name, Select Basic Type and click Create Icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDoc name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press enter
    The system transfers the name of the segment type to the IDoc editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation.
    Save it and go back.
    Go to Edit -> Set Release.
    Message Type:
    Steps in Creating Message Type:
    T.Code WE81.
    change the details from Display mode to Change mode
    After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back.
    Assign Message Type to IDoc Type:
    T.Code WE82
    Change the details from Display mode to change mode.
    After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back.
    Reward Points if useful.

  • Error while parsing or executing XML-SQL document attribute "action" missin

    Hi All,
          I am doing a scenario for IDOC to JDBC, When I push IDOC from R/3 , IDOC sent to XI System successfully, 
           I have also checked in SXMB_MONI it is showing the successful staus without any errors, and I have also copied the xml structure from main document of payloads and tested the mapping in Integration Designer, and it is showing successfull message.
    here is the xml structure from  payloads of Request Message Mapping ........
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
    - <COGRP_TMP_PROC action="EXECUTE">
      <IDOCNUMBER isInput="TRUE" type="CHAR">1000001</IDOCNUMBER>
      <E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
      <E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
      <E1COGH_MSGFN isInput="TRUE" type="CHAR">1</E1COGH_MSGFN>
      <E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">1</E1COGH_GROUPTYPE>
      <E1COGH_GROUPNAME isInput="TRUE" type="CHAR">1</E1COGH_GROUPNAME>
      <E1COGH_KOKRS isInput="TRUE" type="CHAR">1</E1COGH_KOKRS>
      <E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
      <E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
      <E1COGHT_LANGU isInput="TRUE" type="CHAR">2</E1COGHT_LANGU>
      <E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">2</E1COGHT_DESCRIPT>
      <E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">2</E1COGHT_LANGU_ISO>
      <E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
      <E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
      <E1COGV_FROMVALUE isInput="TRUE" type="CHAR">6</E1COGV_FROMVALUE>
      <E1COGV_TOVALUE isInput="TRUE" type="CHAR">6</E1COGV_TOVALUE>
      <E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
      <E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
      <E1COGS_SUBGROUP isInput="TRUE" type="CHAR">4</E1COGS_SUBGROUP>
      <E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
      <E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">6</E1COGHR_HIGHERSEGMENT>
      <E1COGHR_SNAME isInput="TRUE" type="CHAR">3</E1COGHR_SNAME>
      <E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">3</E1COGHR_PRTCLASS>
      <E1COGHR_AUTHGR isInput="TRUE" type="CHAR">3</E1COGHR_AUTHGR>
      <E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
      <E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGSR_HIGHERSEGMENT>
      <E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">5</E1COGSR_XSUPPRESS>
      <E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">5</E1COGSR_PRTCLASS>
      <E1COGSR_LNAME isInput="TRUE" type="CHAR">5</E1COGSR_LNAME>
      <E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
      <E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">9</E1COGVT_HIGHERSEGMENT>
      <E1COGVT_LANGU isInput="TRUE" type="CHAR">7</E1COGVT_LANGU>
      <E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">7</E1COGVT_DESCRIPT>
      <E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">7</E1COGVT_LANGU_ISO>
      <E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
      <E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">12</E1COGVR_HIGHERSEGMENT>
      <E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">8</E1COGVR_XSUPPRESS>
      <E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">8</E1COGVR_PRTCLASS>
      <E1COGVR_LNAME isInput="TRUE" type="CHAR">8</E1COGVR_LNAME>
      </COGRP_TMP_PROC>
      </ns0:RTACOGRP_RECEIVER_MT>
    When I checked for component monitoring in runtime workbench....
    these are the messages........
    <i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)</i>
    Here are the messages from message monitoring ......
    2007-06-07 12:42:17 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
    2007-06-07 12:42:17 Success JDBC adapter receiver channel RTACOGRP_COM_Chan: processing started; party  , service WSORTABS
    2007-06-07 12:42:17 Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
    2007-06-07 12:42:17 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    2007-06-07 12:42:17 Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    2007-06-07 12:42:17 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
    2007-06-07 12:42:17 Error The message status set to NDLV.
    Can any body please resolve the problem.....
    Thanks in Advance
    Murthy

    Bhavesh,
    Now I have changed the data structure , and the resultant structure is like this...
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
    - <Statement>
    - <COGRP_TMP_PROC action="EXECUTE">
      <IDOCNUMBER isInput="TRUE" type="CHAR">100002223</IDOCNUMBER>
      <E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
      <E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
      <E1COGH_MSGFN isInput="TRUE" type="CHAR">H</E1COGH_MSGFN>
      <E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">H</E1COGH_GROUPTYPE>
      <E1COGH_GROUPNAME isInput="TRUE" type="CHAR">H</E1COGH_GROUPNAME>
      <E1COGH_KOKRS isInput="TRUE" type="CHAR">H</E1COGH_KOKRS>
      <E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
      <E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
      <E1COGHT_LANGU isInput="TRUE" type="CHAR">T</E1COGHT_LANGU>
      <E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGHT_DESCRIPT>
      <E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGHT_LANGU_ISO>
      <E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
      <E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
      <E1COGV_FROMVALUE isInput="TRUE" type="CHAR">V</E1COGV_FROMVALUE>
      <E1COGV_TOVALUE isInput="TRUE" type="CHAR">V</E1COGV_TOVALUE>
      <E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
      <E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
      <E1COGS_SUBGROUP isInput="TRUE" type="CHAR">S</E1COGS_SUBGROUP>
      <E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
      <E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGHR_HIGHERSEGMENT>
      <E1COGHR_SNAME isInput="TRUE" type="CHAR">R</E1COGHR_SNAME>
      <E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">R</E1COGHR_PRTCLASS>
      <E1COGHR_AUTHGR isInput="TRUE" type="CHAR">R</E1COGHR_AUTHGR>
      <E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
      <E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">8</E1COGSR_HIGHERSEGMENT>
      <E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">S</E1COGSR_XSUPPRESS>
      <E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">S</E1COGSR_PRTCLASS>
      <E1COGSR_LNAME isInput="TRUE" type="CHAR">S</E1COGSR_LNAME>
      <E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
      <E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">10</E1COGVT_HIGHERSEGMENT>
      <E1COGVT_LANGU isInput="TRUE" type="CHAR">T</E1COGVT_LANGU>
      <E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGVT_DESCRIPT>
      <E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGVT_LANGU_ISO>
      <E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
      <E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">11</E1COGVR_HIGHERSEGMENT>
      <E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">E</E1COGVR_XSUPPRESS>
      <E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">E</E1COGVR_PRTCLASS>
      <E1COGVR_LNAME isInput="TRUE" type="CHAR">E</E1COGVR_LNAME>
      </COGRP_TMP_PROC>
      </Statement>
      </ns0:RTACOGRP_RECEIVER_MT>
    Now in message monitoring error is showing like this...
    <i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
    Now in Component Monitoring error is showing like this....
    <i>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
    I have tested the stored procedure in sql by giving the same values , it was successfully executed..
    Can you please tell me where is the error still in structure ...
    Thanks in Advance,
    Murthy.

  • Error while parsing or executing XML-SQL document

    friends,
    my scenario is based on file to jdbc.i am facing  an error in receiver CC in RWB.
    The error states that '
    Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MATMAS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated.'
    My SOAP xml message is
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    - <SOAP:Header>
    - <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <sap:MessageClass>ApplicationMessage</sap:MessageClass>
      <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
      <sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
      <sap:TimeSent>2008-02-06T22:30:21Z</sap:TimeSent>
    - <sap:Sender>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
      <sap:Service>ECC</sap:Service>
      </sap:Sender>
    - <sap:Receiver>
      <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
      <sap:Service>BS_JDBC</sap:Service>
      </sap:Receiver>
      <sap:Interface namespace="http://file_to_jdbc">MI_JDBC_RECEIVER</sap:Interface>
      </sap:Main>
    - <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
      </sap:ReliableMessaging>
    - <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">
    sapecc50\sapmnt\trans</sap:Record>
      <sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">UTF-8</sap:Record>
      <sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</sap:Record>
      <sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">matmas1.txt</sap:Record>
      </sap:DynamicConfiguration>
    - <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
    - <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
      <sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
      <sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
      <sap:Info />
      </sap:Hop>
    - <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
      <sap:Engine type="IS">is.01.sapecc6eval</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
      <sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
      <sap:Info>3.0</sap:Info>
      </sap:Hop>
    - <sap:Hop timeStamp="2008-02-06T22:30:22Z" wasRead="false">
      <sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
      <sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
      </sap:Hop>
      </sap:HopList>
    - <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:TraceLevel>Information</sap:TraceLevel>
      <sap:Logging>Off</sap:Logging>
      </sap:Diagnostic>
      </SOAP:Header>
    - <SOAP:Body>
    - <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
      <sap:Name>MainDocument</sap:Name>
      <sap:Description />
      <sap:Type>Application</sap:Type>
      </sap:Payload>
      </sap:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    and payload message is
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
    - <STATEMENT>
    - <ROW action="INSERT">
      <TABLE>MATMAS</TABLE>
    - <access>
      <MATNR>38</MATNR>
      <MTART>HALB</MTART>
      <MATKL>00107</MATKL>
      <MEINS>pc</MEINS>
      <ERSDA>2008.04.05</ERSDA>
      <BRGEW>10</BRGEW>
      <NTGEW>12</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>88</MATNR>
      <MTART>FERT</MTART>
      <MATKL>02004</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2008.04.05</ERSDA>
      <BRGEW>12</BRGEW>
      <NTGEW>13</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>89</MATNR>
      <MTART>FERT</MTART>
      <MATKL>02004</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2008.03.02</ERSDA>
      <BRGEW>12</BRGEW>
      <NTGEW>14</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>98</MATNR>
      <MTART>HALB</MTART>
      <MATKL>2</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2006.09.01</ERSDA>
      <BRGEW>12</BRGEW>
      <NTGEW>12</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>170</MATNR>
      <MTART>NLAG</MTART>
      <MATKL>4</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2005.03.02</ERSDA>
      <BRGEW>2</BRGEW>
      <NTGEW>3</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>178</MATNR>
      <MTART>NLAG</MTART>
      <MATKL>4</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2007.03.06</ERSDA>
      <BRGEW>3</BRGEW>
      <NTGEW>4</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>188</MATNR>
      <MTART>NLAG</MTART>
      <MATKL>5</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2007.05.02</ERSDA>
      <BRGEW>2</BRGEW>
      <NTGEW>3</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>288</MATNR>
      <MTART>HALB</MTART>
      <MATKL>101</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2006.02.11</ERSDA>
      <BRGEW>5</BRGEW>
      <NTGEW>4</NTGEW>
      <GEWEI>KG</GEWEI>
      </access>
    - <access>
      <MATNR>358</MATNR>
      <MTART>HAWA</MTART>
      <MATKL>2</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2007.09.09</ERSDA>
      <BRGEW>500</BRGEW>
      <NTGEW>500</NTGEW>
      <GEWEI>G</GEWEI>
      </access>
    - <access>
      <MATNR>359</MATNR>
      <MTART>HAWA</MTART>
      <MATKL>2</MATKL>
      <MEINS>PC</MEINS>
      <ERSDA>2007.08.01</ERSDA>
      <BRGEW>20</BRGEW>
      <NTGEW>10</NTGEW>
      <GEWEI>G</GEWEI>
      </access>
      </ROW>
      </STATEMENT>
      </ns0:MT_JDBC_RECEIVER>
    Could anybody help me in sorting out this issue.My advance thanks

    hi,
    ypur structure is bad defined.
    if you want to do an insert, the DT should be
    <ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
    ___<StatementName>
    ______<dbTableName action=”INSERT”>
    _____<table>MATMAS</table>
    _______ <access>
    ___________<MATNR>38</MATNR>
    ___________<MTART>HALB</MTART>
    ___________<MATKL>00107</MATKL>
    ___________<MEINS>pc</MEINS>
    ___________<ERSDA>2008.04.05</ERSDA>
    ___________<BRGEW>10</BRGEW>
    ___________<NTGEW>12</NTGEW>
    ___________<GEWEI>KG</GEWEI>
    ______</access>
    _____</dbTableName>
    __ </StatementName>
    </ns0:MT_JDBC_RECEIVER>
    the ROW field is used when you wait receive data from DB for example you execute and SQL Query from Sender communication channel "SELECT name FROM TABLE Names"
    so, the result of this query would be, for example:
    <row>
    ____<name>joge</name>
    </row>
    <row>
    ____<name>pepe</name>
    </row>
    <row>
    ____<name>nicola</name>
    </row>
    See this link
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
    Thanks
    Rodrigo
    Edited by: Rodrigo Pertierra on Feb 8, 2008 8:40 AM
    Edited by: Rodrigo Pertierra on Feb 8, 2008 8:42 AM

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

Maybe you are looking for

  • HT4910 I need to find the file location for my iCal in iCloud

    I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

  • Netgear access point

    I have just purchased the new extreme. Set up was straight forward and is at all defaults. I cannot however retain connectivity with a Netgear Universal WIFI internet adapter. WNCE2001. This is being used to connect a device onto my network that does

  • Can't open Photoshop Elements 10. Dialogue box states Run time Error

    This is the second time in a week this has happened. Was able to repair it the first time by changing the name MediaDatabase.db3 to MediaDatabase.old  But what to do now?

  • IMovie unexpectedly quits - Driving me crazy, please help???

    Hi All I am in desperate need of help. I am currently trying to both Publish and or Export a project using iMovie 09. The project runs for 2 and half hours and contains various home movies I have recorded over the year. The actual footage has been re

  • Zigzag distortion in video

    I just purchased a video from ITMS and I am getting zig-zag distortion while playing it in iTunes. I can't tell if there is a problem with the video itself or with the playback, although I haven't experienced this before. It sort of comes and goes an