I am running Dreamweaver CS4. I recently installed ADDT-CS4-101-beata. How do I uninstall ADDT-CS4-101-Beta?

I just installed ADDT-CS4-101-beta, and now I keep getting the Dreamweaver error message "While executing onLoad in ADDT_onOpen.htm, the following JavaScript error(s) occured:
At line 29 of file "C:\program Files\Adobe\Adobe Dreamweaver CS4\Configuration\Commands\ADDT_0nOpen.js": ADDT is not defined.
I am in the very early stages of trying to learn this program. I thought that ADDT-CS4-101-beta was a tool box of add ons. So I installed it, and now I keep getting this error message. I am running WINXP Pro with SP3. I thought I would uninstall this program, and everything would go back to normal, and I could continue my learning process, and install this program later, after I had a better idea of what the heck was going on.
How do I correct this problem? I checked in the WinXP control panel, using "Uninstall Programs", and ADDT-CS4 is not there.

Still fighting this battle of trying to reinstall CS4 Extension Manager. The problem is that I can not get rid of the previous installation. When I tried to uninstall it using WinXP Pro Control Panel/Add/remove it would fail to remove it. Then I used a software program "Perfect Uninstaller" to remove it, and that seemed to have worked. I say (seemed to have worked), because after I rebooted, I checked Start/programs, and CS4 Extension Manager was no longer shown in the listings. Then I went to Control Panel/Add/Remove, and it no longer was listed. Sooooooo I thought I had everything licked, and I doubled clicked on the Setup.exe file of the newely downloaded CS4 Extension Manager, an it ran through the "Checking Profile", and then started the "Setup Program", and gave me the same old message "System Check" "Adobe Extension Manager CS4 is already installed on this machine."
"To reinstall please run the installer which performed the original installation."
I think that it was originall installed when I installed Photoshop CS3, or Photoshop CS4. I can not find my disc for Photoshop CS4. I have the disc for Photoshop CS3, but when I checked that disc for the Extension Manager, I could not find it. Is there any program that will totally rmove the original Extension Manager. Once I can reinstall Extension Manager, I will be able to remove ADDT-CS4-101.
Thanks for any help.
Elroy

Similar Messages

My CC desktop shows Dreamweaver CC (2014) is installed by it is not how can i fix this

My CC desktop shows Dreamweaver CC (2014) is installed by it is not how can i fix this so i can install 2014 version?

Hi Pathfinder_1CAV,
Please follow the link: CC desktop lists applications as "Up to Date" when not installed and this will help you to fix the issue.
Let me know if you face any issues while doing that.
Thanks,
Ratandeep Arora

I have CC subscription, and have recently upgraded photoshop to CC 2014, how can I uninstall the OLD photoshop CC version

Hi all,
I have CC subscription, and have recently upgraded photoshop to CC 2014, how can I uninstall the OLD photoshop CC version?
Many thanks
Mark

I usually keep my old versions until I'm certain I no longer need them.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O.

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?

I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?
Message was edited by: davidjsousa

Of course

ANN: Video tutorials for Dreamweaver CS4 public beta

I have created a couple of video tutorials to help people get
up to
speed with some of the new features in the public beta of
Dreamweaver
CS4. They cover the changes to the interface, Related
Documents, Live
View, Code Navigator, and Live Code. You can access them at
the
following location:
http://foundationphp.com/tutorials/cs4beta.php
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

any news on an expected relaese date for CS4?
B
www.visit-the-coqui.com/
If you are thinking of a vacation to Puerto Rico
http://gadgetgrapevine.blogspot.com
Latest gadget and other news here
"David Powers" <[email protected]> wrote in message
news:g1h43h$4n5$[email protected]..
>I have created a couple of video tutorials to help people
get up to speed
>with some of the new features in the public beta of
Dreamweaver CS4. They
>cover the changes to the interface, Related Documents,
Live View, Code
>Navigator, and Live Code. You can access them at the
following location:
>
>
http://foundationphp.com/tutorials/cs4beta.php
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

I can't print from Firefox (on a MacBook) since I tried to instal the new version. How do I uninstall it (all components), and then reinstall?

Can't print from Firefox - it crashes.
== This happened ==
Every time Firefox opened
== I upgraded ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Also can't print from FF 3.6.12, but it doesn't crash. There's no error message, no job gets queued to the printer. Other applications (including Safari) print without a problem.

Dreamweaver CS4 keeps showing a licensing error 150:30. Any ideas?

I am running Dreamweaver CS4 on a MacBook Pro. After a Mac OSX update earlier today Dreamweaver keeps showing a licensing error 150:30 and the only solution on line is not suitable for OS 10.9.5. Any ideas?

The terminal app option worked but after a restart I got the error message again. It worked a second time but then another restart brought me back to the beginnin. Have repaired permissions and tried the other potential solutions. I only use DW CS4 once in a while but I'd love a permanent solution.

DreamWeaver CS4 CSS code hints not working

Please help.
DreamWeaver has stopped showing code hints for CSS selector values. When I start typing "… div {border: …" DreamWeaver used to show the possible value for this selector (i.e. 1px solid #ccc). Now all that pops up is this "… 'border-width' 'border-style' 'color' …"
How can I get DreamWeaver to show the possible values for CSS? I'm running DreamWeaver CS4 on a Mac book pro with Snow Leopard. DreamWeaver was set up using the default settings, and there are no extensions enabled.
The attached screen shots show what I am experincing.
Thanks,

Wow... you waited all of 2 hours...
try removing your configuration folder and restarting
"ianhg" <[email protected]> wrote in message
news:ea7m2g$68e$[email protected]..
> Hi Folks,
>
> Has no one any ideas --- Please!!
>
> Ian

Paste not working in Dreamweaver CS4

I am running Dreamweaver CS4. The paste function is not working. Any ideas?

Assuming that your system runs Windows, there are a number of ways to paste the contents of the Clipboard into your document. The most trustworthy way is to use CTRL+v

Dreamweaver CS4 - Existing Site Name Changed in Manage Sites

Please help me! I have an existing site name from Manage Sites become slightly different site name from original.
For example, existing site name was fashionstars, now become ftp://fashionstars, with ftp:// in it. ( It happen when I did some try and error approach to do certain task, or press the wrong buttons etc) Is there any possibility to change back to original name fashionstars and how to do it? Otherwise I won't be able to upload files to remote site because of different site name appeared in Manage Sites.
Should I remove the modified site name ftp://fashionstars and recreate a new site name fashionstars and copy all exiting files from local site folder to new fashionstars?
Regards,
SSYYDD

Additional information, I use MacBook Pro to run Dreamweaver CS4. The existing site has 150 MB file size, hundreds of files, so to recreate new site name, it has to start to create all manually, will take a long time. Is there any other ways I can recreate site fashionstars without to start all over again?
I am very worry about this, it may not be able to fix it. My website is stuck, won't be able to upload files any more.
Another problem is that I lost the SITE DEFINITIONS for fashionstars or htp://fashionstars . When I go to Manage Sites to edit site of ftp://fashionstars, it goes to CONFIGURE SERVER, not the SITE DEFINITIONS for fashionstars or ftp://fashionstars. Please help me.
( note that I use the name fashionstars as an example only, not my real site name)
Thank you.
SSYYDD

HT5622 I recently installed a new computer and now iTunes says that my computer is not authorized. How do I authorize it?

iTunes says that my computer is not authorized.
I recently installed a new computer.
How do I authorize it?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(103238)

How do i uninstall Vista when i can't run Boot Camp Assistant Beta?

Recently, i posted a topic on how i can uninstall windows on my mac but as i tired to run Boot camp assistant, i got a message saying "Boot Camp Assistant Beta has expired"
PLEASE HELP!
I really want to get rid of Windows!
Thanks

manually change the time myself?
Yes. The beta assistant won't run unless the time is manually set backwards.
(42532)

Dreamweaver CS4 runs ok but fails to close correctly. Cannot run again until previous instance is killed.

I have a clean install of a recently purchased copy (10.0, build 4117) of Dreamweaver CS4 (twice now). I start DW and do absolutely nothing except exit. The program seems to close ok and all windows are closed. However, I cannot runb DW again, if I do , it just hangs during startup at some point before any windows are opened. A look at the task manager shows the previous instance of CS4 is still running. If I kill dreamweaver.exe then I can run CS4 again.
If I use DW then everything seems to work ok and all of the extentions I have purchase install and work fine too. I even imported a large NetObjects website and is was 100% correct (I was surprised).
I have removed AVG, I do not have an Acer, I have renamed the config folder and I am about to throw the towel in.
I have checked the registry and all is ok with the hives.
The system is: AMD Athlon X2 running XP-Pro SP3, 2GB Ram, 2 X 300GB HDD with plenty of free space, no internal firewall, AVG removed (after scan), ATI Graphics. I have never had Dreamwaever on this PC before and all extensions are now removed.
For any techies reading this I discovered that, after clsing DW, the task is still running with 17 threads. Slowly, at about one per minute, the number of threads drops to 12 but drops no further even if you leave is 24 hours.
The installation was fault free (both times!). The program loads ok and works ok. So, why does a fresh copy of DW with no website created or any configuration changes of any form fail to shutdown correclty?
Any ideas?

You've already tried the suggestions I normally make if there is a problem with running DW... I really can't help you with your problem and as no-one else has submitted a reply generally there's no-one with an answer.
I can only suggest that you contactAdobe Support and outline what you just did in your post here... hopefully they'll be able to sort this o9ut for you.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Error Installing Dreamweaver CS4 on Windows 7: Installer Database is Corrupt

Error Message: The Installer Database is Corrupt. Please contact Adobe Customer Service.
I bought a new laptop and would like to install Dreamweaver CS4 on it. It is already running fine on my desktop, being installed back in 1/2011. Both PCs are Windows 7 but the new laptop is Windows 7 Professional. I have downloaded the two install files ADBEDRWVCS4_LS1.7z and ADBEDRWVCS4_LS1.exe multiple ways and to multiple locatons on the laptop. I've run the .exe file multiple ways and extracted to several locations besides the default (c:\users\userid\Desktop\Adobe CS4). After the extract completes and it tries to run setup I get the same message "The Installer Database is corrupt. Please Contact Adobe Customer Service" (which I did and they just gave me another download link I had already tried).
I even copied the folder with the extracted files done on my desktop (where the install had succeeded). And still got the same message when I ran setup.exe on the laptop. I tried running it with a "run as administrator" command prompt, double-clicking in Windows Explorer, start > run and the same thing happens. At least it doesn't appear that it has actually installed anything yet.
I did notice that my new PC has a program called "7-zip 9.20" installed which I do not remember installing and its install date is prior to my purchase of the PC so I'm guessing it came with it (HP Pavilion 15t running Windows 7 Professional 64-bit). The Windows 7 Desktop does not have this program installed. It is available from C|net where it has a good rating. Perhaps setup.exe does further extracting and the 7-zip program is the culprit? This is a long shot.
I searched for others with this problem and found lots of issues installing Dw CS4, but none quite like this.

Awesome! That worked! Actually I searched three folders (Program Files, Program Files (x86) & Program Data) for caps.db and found:
c:\Program Files\Adobe\Adobe Premier Elements\caps.db (dated 9/2/2011)
c:\Program Files (x86)\Common Files\Adobe\Backup\caps.db
I ignored the first one since it might be needed by the Premier Elements 10 I installed yesterday and changed the name of the other one from caps.db to barb.fix.
I changed the install folder from c:\Program Files\Adobe to c:\Program Files (x86) just in case CS4 is a 32-bit application which I had done before when installing on my Windows7 Desktop. Now that the install has completed I see that I have caps.db files dated 5/5/2014 in
c:\Program Files (x86)\Common Files\Adobe\caps\caps.db
c:\Program Files (x86)\Common Files\Adobe\backup\caps.db (barb.fix is still there but is only 26kb vs 3291 kb for the new caps.db)
Thank-you so much! Now wish me luck when I try to open it for the first time!

I can't install dreamweaver CS4

I have buy Creative Suite design premium and i can't install dreamweaver CS4
before i installed DW CS4 beta for test and put the icon in the bin to desinstall it and now i can(t use the buy version
how can i do ?
thanks

You can't just trash Adobe apps. You need to uninstall them.
Now you'll need to hunt down the CS4 clean script and run that.
Bob

I am running Dreamweaver CS4. I recently installed ADDT-CS4-101-beata. How do I uninstall ADDT-CS4-101-Beta?

Similar Messages

Maybe you are looking for