I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

  • Will Illustrator run on 1.8GHz quad core processor?

    I am reading that Illustrator CS4 requires a 2.0GHz processor to run. I am assuming that is for a single core processor. I am considering buying a new computer running Vista 64 bit with a1.8GHz quad core processor and 4GB of RAM. Would Illustrator CS4 run ok on such a system?
    Thanks,
    Bob

    I think 1400 by 900 is good since you can run many of the motion graphic programs on such a monitor.
    1920 x 1200 is very good but now things have gotten to the point that they have higher resolution available.
    So I recommend the highest you need. The reason i say this is that once applications are made multi core worthy  and go 64 bit it requires more resources but it will perform better and what I mean by better is not necessarily speed on any one task but the it will offer functions that are not possible on the current cpus with the current application.
    It just seems to me you need a little more then what you are getting, a little more so that in the very near future you will not have to upgrade again causing you to end up paying even more that you thought you were saving.
    If you understand my logic.
    Though the answer to your original question is it can probably run, how well you would probably have to tell us after you get it.

  • What is the latest downloadable version for Adobe Reader 11.0.08 or 11.0.09?

    What is the latest downloadable version for Adobe Reader 11.0.08 or 11.0.09?  I saw the 11.0.09 download last Thursday 9/18/14 but no longer seeing it today 9/22/14, just the 11.0.08.  Also, after I have downloaded and expanded AdbeRdr11008_en_US.exe, I am getting AcroReader.msi that is posted date on 9/23/2012.  I need to customize the MSI file using the Adobe Customization Wizard XI for our corporate environment.  Can you direct me on where to download the latest MSI file for Adobe Reader?  Thanks.

    The latest MSI made available by Adobe is AdbeRdr11000_en_US.msi
    You can get the 11.0.09 EXE from http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.09/en_US/AdbeRdr11009_en_US.exe

  • In Cs5, ACR I could select crop, right click and on custom, put in a size in millimetres or inches , the latest CC version seems to lack this. Any advice??

    In Cs5, ACR I could select crop, right click and on custom, put in a size in millimetres or inches , the latest CC version seems to lack this. Any advice??

    In Camera Raw? The Workflow options are now responsible for actual image size. See Julianne Kost's blog post. (There's a video that discusses this in detail at the beginning there as well.)

  • Does Firefox 13 run in a multi-threaded mode and can it utilize quad-core processors?

    When purchasing a new PC, one chooses between dual-core vs. quad-core processors and some people claim that Firefox run in a mulch-threaded mode and treats each tab as a separate process and that it can fully utilize the advantage of a quad-core processor. Is that true?

    Firefox doesn't treat each tab as a separate process. While this may be a feature sometime in the future, I don't know of any plans to introduce it anytime soon. Obviously, buying a quad core processor is going to be significantly faster than a dual-core, and your browser is usually less resource intensive than many other programs. I wouldn't use it as your purchasing decision. Firefox will run equally well on a dual-core or a quad-core, but windows and other programs will run better with 4 cores.

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in

    Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in the Dock it will open in CC.  Since I like to double-click or hit return in the bridge, I am constantly having to wait until the file opens in CS6, quit CS6 an then open it another way to get it into Photoshop CC 2014.  I tried to disable CS6 by hiding it, but then double-clicking Bridge did nothing.  Any ideas why this is happening?

    Check and adjust the File Type Associations in the bridge cc preferences.

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I am running Photoshop CC 2014 on iMac OS X and have recently had to reinstall the OS following upgrade to an SSD.  I cannot update Photoshop as it says it is unable to extract the downloaded files (U44M1/2010).  Should I reinstall Photoshop and Bridge fr

    I am running Photoshop CC 2014 on iMac OS X and have recently had to reinstall the OS following upgrade to an SSD.  I cannot update Photoshop as it says it is unable to extract the downloaded files (U44M1/2010).  Should I reinstall Photoshop and Bridge from scratch or is there an easier way?@@ !

    Sounds like you transferred programs from another drive? This isn't a very good way to do it. Yes, re-install the Adobe apps.
    Benjamin

  • Iphone 4 sync issue -  My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

      My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

    Remove the song in question from the sync list and see if the rectifies the problem.
    If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

  • Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems

    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032

    jackg032 wrote:
    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032
    Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop.   You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
    Windows 7 was billed as the first MS OS to need less system resources than its predecessor.  If your system hardware will support 64bit, then consider paying $90 for an OS upgrade  What is your system out of interest?  I have a feeling you are running with just 2Gb RAM, which just isn’t enough.  Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

  • Just purchased CC Lightroom & Photoshop following a 30 day free trial. All worked well during the trial but now I have subscribed to the plan and downloaded the latest LR version I am unable to zoom into the images and just get a constant 'loading' box an

    Just purchased CC2015 Lightroom & Photoshop following a 30 day free trial. All worked well during the trial but now I have subscribed to the plan and downloaded the latest LR version I am unable to zoom into the images and just get a constant 'loading' box and spinning circle. Also, the whole system is very slow - very frustrating! Any ideas? I am running it on Windows 8.
    Mick

    You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
    Thomas Cannon Jr.

  • Need the latest driver for Broadcom 802.11b/g WLAN to upgrade XP to Windows 7 on my Compaq Mini 110

    Windows 7 advisor says to download the latest driver for Broadcom 802.11b/g WLAN before I can upgrade from Winows XP.  My notebook is a Compaq Mini 110c-1100CA.
    Please get me the latest driver.
    This question was solved.
    View Solution.

    Here you go:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-76268-1&cc=us&dlc=en&lc=en&​...
    These drivers will get you working with Windows 7 32 bit. Windows Update might have a later version after you get this installed. Paul linked you to an XP driver above but I believe you are looking for a Win 7 driver.
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of

    I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.

    Welcome to Apple Support Communities
    When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
    To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
    Respecting to the second question, you will get better answers in the Numbers for OS X forum

  • Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

    Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
    == This happened ==
    A few times a week
    == A week and a half after i installed Fox Filter. ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

    Hello Steve.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

Maybe you are looking for

  • Query on Procurement and Invoice Verification for Purchase Scheme by Vendor

    Dears, This is K.Hari Hara Ganesh. I have a query. Scenario Vendor commits us if the Purchasing Qty is 200 Kgs for a Material, then 10 Kgs will be given Free of Cost.  If it is lesser than 200, no free. Once received, my Stock should be updated for 2

  • How to create a database in sql?

    My question is how to create a database in sql?

  • No longer able to log in except for manually.

    I've been switching between gnome-shell, openbox (stand alone) and XFCE trying to figure out which I want to use (deleting the settings after each switch) and now it won't let me login using openbox at all anymore; XFCE works if I do it manually. If

  • ABAP OO: methods as method params, method chains

    Hello all, I am currently developing quite much ABAP OO and wonder if this is possible, because I got compilation errors. a) Methods as method params w/o temp vars: I have a method whose parameter shall be the return value (let s say a string) shall

  • Smart Sync Synchronization Error

    I have created a syncbo and I am trying to test it using the Syncbo Emulator. After running the test I see that I have data queued in status O-Waiting. I then start up my MI Client and when I start the synchronization process I get the following mess