I am trying to access my I tunes Library on my desktop. I get the following message: The file "I Tunes Libarary" cannot be read because it was created by a newer version of ITunes. What do I do?
I am trying to access my ITunes Libarary and I keep getting the same message. "the file "ITunes Libarary" cannot be read becuase it was created by a newer version of ITunes.
How to I get my libarary back? I need to synch my Ipod.
Thanks,
Ann Smith
Update your copy of itunes to the current version.
Similar Messages
-
when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
itunes tod me i needed to re-install it, so i did but everytime i click on itunes on my desktop it comes up with "the file itunes litbrary.itl cannot be read because it was created by a newer version of itunes" what do i do now?
If you've already installed the latest version then the message may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2 -
Screen Message on P.C. "File "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.
What is this and how can it be fixed, please?Problem solved by doing the following:
Open PC/Mac and search for iTunes Library.
From the list, select the most recent version of iTunes Library. Save this to a folder.
Delete iTunes from your computer.
Install latest version of iTunes.
When I opened the new version of iTunes, everything was there as before.
I didn't need to import the saved version of iTunes Library. Maybe this happens automatically????? -
The file "i tunes library .it" cannot be read because it was created by a newer version of itunes? What do i do help please
That message may appear if you intentionally downgrade iTunes, alternatively it may indicate a corrupt library database.
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
The file i tunes library.itl cannot be read because it was created by a newer version of itunes
The file i tunes library.itl cannot be read because it was created by a newer version of itunes?
I got this message after trying to open up itunes . I recently did a system restore to my computer to a restore point i made a couple days ago
My itunes library was huge and very organized have I lost it all because I restored my pc to 7 days ago????? SERIOUSLY I GOOGLED THIS and I HAVE READ SO MANY DIFFERENT ANSWERS ITS ANNOYING!!!!
I have windows vista
CAN SOMEBODY JUST GIVE ME A SOLUTION TO HOW TO GET MY ITUNES(PLAYLISTS AND ALL) BACK!!!!!
dont give me a way that deletes all my playlists because i had way over 1,000 playlists divided into Folders it was super organized!It sounds as though the system restore that you've done has reverted your computer back to a previous version of iTunes. In iTunes look at Help/About iTunes and as the scroll runs, you will see the iTunes version number.
The latest version of iTunes (on the day of writing) is 10.5.1.42, so if your iTunes is lower than that, it's possible that's what the problem is. (This assumes that you were previously using 10.5.1.42, which is a reasonable assumption.)
So make sure you have the latest version. I don't know why you did the system restore on your computer, but despite what some people may have you believe, iTunes is very stable and unlikely to be causing any issues on your computer that need to be undone with a system restore. -
When I try to access iTunes I get 'The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?'' But when I try to down load I get "unknown error occurred (-42408)". Don't know what to do next and I can't get into my iTunes library. (I have an iMac, OS10.6.8.)
Did you uninstall iTunes 11 and replace it with iTunes 10.7? If so, you'll need to go through a few steps to put things right:
Rename "iTunes Library.itl" to some other name;
Copy newst ITL file from the "Previous iTunes Libraries" folder into your main iTunes folder and rename it to "iTunes Library.itl";
Download iTunes 10.7: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Download/install shareware app called Pacifist;
Open Pacifist and, separately, mount iTunes DMG file -- drag iTunes PKG file into Pacifist and install iTunes via the Pacifist application -- be sure to answer yes to replacing everything Pacifist asks about;
Enjoy iTunes 10.7.
Cheers,
trane -
When trying to sync my nano 5th Gen i got a message saying there was a problem and to try uninstalling and reinstalling. I did this step by step, but when reinstalling i was presented with this message. 'The file 'i Tunes library .itl' cannot be read because it was created by a newer version of iTunes'. Any ideas what i can doto rectify this????
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
"The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes" is the prompt displayed on the screen when I try to launch iTunes. What do I do?
It sounds as though the system restore that you've done has reverted your computer back to a previous version of iTunes. In iTunes look at Help/About iTunes and as the scroll runs, you will see the iTunes version number.
The latest version of iTunes (on the day of writing) is 10.5.1.42, so if your iTunes is lower than that, it's possible that's what the problem is. (This assumes that you were previously using 10.5.1.42, which is a reasonable assumption.)
So make sure you have the latest version. I don't know why you did the system restore on your computer, but despite what some people may have you believe, iTunes is very stable and unlikely to be causing any issues on your computer that need to be undone with a system restore. -
after I downloaded the latest itunes, I am gettingthis error.the file "i Tunes Library.itl" cannot be read because it was created by a new version of iTunes. I don't know what to do next. Please help.
LovemyiTunesSee Empty/corrupt library after upgrade/crash.
tt2
Maybe you are looking for
-
How do you get all downloads from one computer to another
How do I get everything on iTunes from one computer to another?
-
Not showing transactions for creating follow up transaction for service tic
Hi, I created copy copy control settings for transactions for service ticket.initially i created service ticket and saved the document.after that i clicked on follow up button and i am trying to selct transactions.but i am not able to see any transac
-
3D solid warps on oddly on a Z rotation
I've browsed the internet looking for an answer to this peculier problem which is: Whenever I convert a flat solid layer to a 3D object and then try to rotate it on the Z axis, it begins to stretch the object on the X axis. When I return back for a f
-
I am trying to synchronize the time of my machine with another machine (target) on the local network by using "net time" command and found something strange for me. If I change the local time on my machine and then use "net time" to read or synchroni
-
UmbWhat is unlock code of an unactivated LG VN251 after a "Restore Phone" operation?
We got new pones, and I want to sell the old one. My phone number was still appearing on the "name card" even after a Reset, so I went to the security menu and did a Restore Phone operation. Now the original security code (last 4 digits of my phone