I am trying to burn a CD from a playlist in iTunes. I set everything up, and then when it tries to burn, it cancels the burn right away, and gives me the error code: 4251. What am I doing wrong?
Okay, so I wanted to burn a CD to play on players in the house. The songs on my playlist are from CDs that I own and imported into my iTunes. Here are the steps I've taken:
1. I created a playlist
2. Selected File > Burn Playlist to Disc...
3. My Burn Settings are as follows: Maximum Possible Speed (I have tried all the other speeds as well with the same result), Audio CD (No gaps between songs), Use Sound Check is selected, Include CD Text is selected (I have also tried unselecting these two options).
4. Then I clicked Burn
5. Within a couple of seconds "Cancelling Burn" shows up in the window at the top of the screen, and a box pops up that says: The attempt to burn a disc failed. An unknown error occurred (4251).
I have tried different CDs, I have changed all the settings in the Burn Settings box, and I get the same result over and over again. I researched the error 4251, and it refers to a problem with importing songs from a CD. This is totally irrelevant since I'm not trying to import, I'm trying to burn. This is a blank CD, and it is a CD-R. These CDs are off a tower I purchased less than a month ago, and have had absolutely no problem burning other things to these CDs. I really don't want to have to re-import these songs to Windows Media Player or another application just so I can burn what I want onto a CD, but this is almost the point I am at.
iTunes certainly isn't helping me much at this point, and I would appreciate any feedback into what I am possibly doing wrong in trying to create a CD.
I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.
Similar Messages
-
I have a scanner and i get the error code:201 what does this mean?
i have a scanner and i get the error code:201 what does this mean?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
I am trying to transfer my iTunes library to a new computer via external hard drive. When I open iTunes on my new Windows 7 computer, after I have followed the tutorial on the website, I get an additional promt to "scan fror media". All the songs are copying twice. I have uninstalled the program twice and tried again with the same result. What am I doing wrong?
Thank you for your response. I have done this...when I open the iTunes folder copied from my old computer, each song appears only once. When I open iTunes each song appears twice. Should I uninstall the iTunes folder from my old computer and reinstall it? It make no sense that I have 2 of everything in iTunes. Thank you for responding - I really appreciate it, as I don't want to have to delete each duplicate song
-
Whenever I try to transfer an ebook to my nook (via a macbook), it says adobe has quit unexpectedly and gives me an error code. Does not successfully transfer the ebook.
I was having the same problem using ADE 4.0.2 and Mac 10.10.1. I finally gave up and deleted ADE version 4 and reinstalled version 3.0. Works fine, and I can check out ebooks for my Nook using ADE.
-
I'm trying to make a photo cd on iphoto. Each time it stops with this message "Operation could not be completed (OSStatus error - 9459).
What am I doing wrong?By photo CD do you mean you're trying to burn image files to a CD disk from iPhoto? How are you going about this?
OT -
Everytime I turn on iTunes it say it wasn't installed properly and can't burn CD's. However all my music is there for me to listen to on my iPod Nano.
I want to unistall iTunes and it allows me to go through the process until about 2% is waiting for uninstall and then I get an error message that says it couldn't complete the uninstall and gives me an error code of 2330.
Can anybody please help me. iTunes wants to charge $19.
Thank you.ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
I can't get passbook to accept my loyalty cards. It keeps saying no pass available for this code. What am I doing wrong?
You may have installed your TextWrangler application without administrator privileges. In this you'll have to look for the twdiff file in the Local Applications Support Folder (refer to TextWrangler User Manual).
To fix your problem with Dreamweaver, while selecting your File Compare tool, try looking for the twdiff file in the following location :
Macintosh HD:usr:local:bin:twdiff
That should definitely work. It did for me
Cheers! -
I redeemed a 25 dlls gift card to buy a single song that cost 1.29. Now I want to buy another one and it tells me that I already redeemed that code. What am I doing wrong?
Please try the following steps,
1) Visit the My Apple ID website at:
http://appleid.apple.com
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the column on the left. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit. Edit all of your shipping addresses and make sure the appropriate state is selected in the State drop-down menus.
6) Now click "Phone Numbers" on the left. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
7) Make any other necessary corrections, then click the Save Changes button.
8) Click Log out in the upper-right corner.
When you make your next purchase on the iTunes Store, you will be asked to review your billing information. At this point, you can change your information or simply click Done at the bottom of the screen to proceed. Once you click Done, you should be able to purchase on the iTunes Store using your store credit. -
I bought a ringtone from the store but it doesn't appear on the ringtone list? What I'm doing wrong?
how can I set this ringtone as my default Tone?I tried that already.. the thing is, i press "buy more tones" in the "incoming call tones" panel, and the ringtone i purchased appears as "downloaded", but it only appears on the iphones itunes, not in the tones panels.
I know it's a small thing but y payed for this... -
Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.
There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted. -
I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?
Hi Maryan,
Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same. -
Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra -
New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?
You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium -
How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions: -
I sign-in with my Apple ID to update my apps. Asks for my password. Type it in and it just takes me right back to the update screen. What an I doing wrong?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
Maybe you are looking for
-
Is anyone experiencing a delay in synching between devices?
I read, file and/or delete my mail on my iPad and my iPhone does not update immediately. Sometimes takes 30 minutes or more. Is this normal?
-
Hello, Can I call ad_parallel_updates_pkg.initialize_rowid_range with 5 different tables in the same script as in the below script? ftp://bugftp.us.oracle.com/upload/bug_12/bug12928204/c1279530_final.sql When I'm trying to test the script and extract
-
Why are all my plugins not starting when I start firefox normally?
When I start firefox, my plugins won't work. It used to work. When I open the add-ons window, it shows all the add-ons correctly but when I click options, it shows a very small window and no options.
-
When I sync, the BB software cuts off part of the first name of my Outlook contacts. The problem seems to happen when I have a space in the first name (eg: First Name - Bill & Jane). I have several of my contacts listed that way so I can see spouse
-
Hi, I am setting image byte array to servlet output stream after setting content type as "image/jpg". Problem 1: if I set contentType as "image/jpeg" or "image/gif" it is showing some image on page and for some image red cross mark comes in upper cor