I am unable to find the main menu on my android, how is it acessed

i seem to have the firefox page, top sites history and favorites, but i don"t know how to get to the menu to clear history I tried the top right, I tried the left botton.....nothing

Its the key on the bottom of your phone that looks like two vertically stacked "=" signs. What phone do you have?

Similar Messages

Unable to see the main menu of crimson skies.

Hi! I have a small problem with my latest purchase, crimson skies. I have tried it before and I know that it is a great game. It installs fine and starts up nicely, no problems there, but after it reaches "main menu", i cannot see it, only the backround shows (moving pirate flag). I tried software rendering and i can see the menu just fine but it aint really candy for eyes to use software rendering. I read about this problem on other support forums and they said that it is because of "power 2?" texture rendering (no idea what it is) and they also said that it is a problem with "new" graphic cards (my system runs on MSI GF 4600 Ti). Last time i played it with an TNT 2 card and it worked fine.
I was wondering would anyone know an way to get it to work (other than using software rendering or swaping tnt 2 back) or will the tnt 2 even work with it anymore because of detonator drivers?
Thank you for any answers you can provide and sorry for incorrect english!

yeah but they are not helping , i could try to swap to my tnt 2... but even IF it works, it lowers overall performance BADLY

HT4098 I am unable to find the main account page so that I can manage my subscriptions. Can somebody help me?

I'm trying to manage my subscriptions but can't seem to navigate my way around and find the page on my iPhone. Somebody please help?

Do the instructions on this page not help : http://support.apple.com/kb/HT4098 ?
If you have any auto-renewing subscriptions then you should be able to see them by going to the bottom of the Featured tab in the App Store app on your phone, tapping your id and selecting View Apple ID on the popup - if you don't have any auto-renewing subscriptions then it won't appear on your account page.

The dreaded "could not find the Main Class, Program will exit", how?

Hello all,
I am trying to run my .jar file and I get this error message.
I want to mention I googled and searched for it, without success: There is so many different explanations!
I tried this:
Adding some lines in a manifest.fm file...
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
X-COMMENT: Main-Class will be added automatically by build
I have Netbeans 5.5.
Also I noticed my "build.xml" file is empty" and my "manifest.fm" nearly empty. I have also added "project, main class" in the options...
Here is my "build":
{code}<?xml version="1.0" encoding="UTF-8"?>



<project name="BetaCourseworkJava3d_Final" default="default" basedir=".">
<description>Builds, tests, and runs the project BetaCourseworkJava3d_Final.</description>
<import file="nbproject/build-impl.xml"/>

</project>
{code}
my Manifest:
{code}Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
X-COMMENT: Main-Class will be added automatically by build
{code}
And my whole code (although I have like 4 .JAVA files in my project):
{code}
package courseworkjava3d;
import java.awt.*;
import java.awt.event.*;
import com.sun.j3d.utils.geometry.*;
import com.sun.j3d.utils.universe.*;
import javax.swing.*;
import javax.media.j3d.*;
import javax.vecmath.*;
import javax.media.j3d.PositionPathInterpolator;
import javax.media.j3d.Alpha;
import javax.media.j3d.BoundingSphere;
import com.sun.j3d.utils.applet.MainFrame;
import java.applet.Applet;
import java.awt.event.WindowAdapter;
import javax.swing.Timer;
import com.sun.j3d.utils.image.*;
public class Simple3D extends JFrame implements ActionListener, KeyListener
private TransformGroup objTransxx;
private Button go = new Button("Press to start the Bouncing Ball. Press A and S to move the ball Left and Right once it started!");
private Transform3D transxx = new Transform3D();
private float height=0.0f;
private float sign = 1.0f; // aller vers le haut ou vers le bas
private Timer timer;
private float xloc=-2.25f;
public Simple3D()
setSize(800, 800);
GraphicsConfiguration graphicsConfig = SimpleUniverse.getPreferredConfiguration();
Canvas3D canvas = new Canvas3D(graphicsConfig);
getContentPane().add("Center", canvas);
BasicUniverse universe = new BasicUniverse(canvas, 8.0f);
// Rotate the view platform by PI/4 radians about X in the BasicUniverse
TransformGroup viewTransform = universe.getViewPlatformTransform();
Transform3D transform = new Transform3D();
transform.rotX(-Math.PI / 4.0);
Transform3D currentTransform = new Transform3D();
viewTransform.getTransform(currentTransform);
transform.mul(currentTransform);
viewTransform.setTransform(transform);
// Add something to display
BranchGroup scene = createCubeGraph();
universe.addBranchGraph(scene);
/* //ultra important! comment theses lines otherwise it bugs!
//Merde
setLayout(new BorderLayout());
GraphicsConfiguration config =
SimpleUniverse.getPreferredConfiguration();
Canvas3D c = new Canvas3D(config); */
add("Center", canvas);
//i messed up te code, i replaced canvas c by "canvas" as i already had one!
canvas.addKeyListener(this);
timer = new Timer(75,this);
//timer.start();
Panel p =new Panel();
p.add(go);
add("North",p);
go.addActionListener(this);
go.addKeyListener(this);
// Cr�er une sc�ne simple et l�ajouetr � l�univers
//BranchGroup scene2 = createCubeGraph();
//SimpleUniverse u = new SimpleUniverse(c);
//u.getViewingPlatform().setNominalViewingTransform();
//u.addBranchGraph(scene2);
//End Merde
public BranchGroup createCubeGraph() {
BranchGroup Humanoid = new BranchGroup();
//Debut Ball REBOUND
// Create the root of the branch graph
//BranchGroup objRoot = new BranchGroup();
objTransxx = new TransformGroup();
objTransxx.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
Humanoid.addChild(objTransxx);
// Cr�er une forme simple et l�ajouter au graph de sc�ne
Sphere spherex = new Sphere(0.85f);
objTransxx = new TransformGroup();
objTransxx.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
Transform3D pos1 = new Transform3D();
pos1.setTranslation(new Vector3f(-2.0f,0.0f,-2.0f));
objTransxx.setTransform(pos1);
objTransxx.addChild(spherex);
Humanoid.addChild(objTransxx);
BoundingSphere boundsx =
new BoundingSphere(new Point3d(0.0,0.0,0.0), 100.0);
// I messed up the colors: I have applied 2 times some colorslights to the same BranchGroup
Color3f light1Colorx = new Color3f(1.0f, 1.0f, 1.0f);
Vector3f light1Directionx = new Vector3f(4.0f, -7.0f, -12.0f);
DirectionalLight light1x
= new DirectionalLight(light1Colorx, light1Directionx);
light1x.setInfluencingBounds(boundsx);
Humanoid.addChild(light1x);
// R�gler la lumi�re ambiante
Color3f ambientColorx = new Color3f(1.0f, 1.0f, 1.0f);
AmbientLight ambientLightNodex = new AmbientLight(ambientColorx);
ambientLightNodex.setInfluencingBounds(boundsx);
Humanoid.addChild(ambientLightNodex);
// END BallRebound
// Apparence BODY
// Configurer les couleurs
Color3f blackbody = new Color3f(0.0f, 0.0f, 0.0f);
Color3f whitebody = new Color3f(1.0f, 1.0f, 1.0f);
Color3f redbody = new Color3f(0.8f, .85f, .85f);
// Configurer la texture
//if I want it in Black and white i need to replace RGB by LUMINANCE
TextureLoader loaderbody = new TextureLoader("C:\\java3d\\body.jpg", "RGB", new Container());
Texture texturebody = loaderbody.getTexture();
texturebody.setBoundaryModeS(Texture.WRAP);
texturebody.setBoundaryModeT(Texture.WRAP);
texturebody.setBoundaryColor( new Color4f( 1.0f, 1.0f, 0.0f, 0.0f ) );
// Configurer les attributs de la texture
// Param�tres possibles : REPLACE, BLEND ou DECAL (ici, MODULATE)
TextureAttributes texAttrbody = new TextureAttributes();
texAttrbody.setTextureMode(TextureAttributes.MODULATE);
Appearance apbody = new Appearance();
apbody.setTexture(texturebody);
apbody.setTextureAttributes(texAttrbody);
//Configurer le mat�riau
apbody.setMaterial(new Material(redbody, blackbody, redbody, blackbody, 1.0f));
// Cr�er une sph�re pour y appliquer les textures
int primflagsbody = Primitive.GENERATE_NORMALS + Primitive.GENERATE_TEXTURE_COORDS;
// End Apparence BODY
// Apparence BODYHEAD
// Configurer les couleurs
Color3f blackbodyH = new Color3f(0.0f, 0.0f, 0.0f);
Color3f whitebodyH = new Color3f(1.0f, 1.0f, 1.0f);
Color3f redbodyH = new Color3f(0.8f, .85f, .85f);
// Configurer la texture
//if I want it in Black and white i need to replace RGB by LUMINANCE
TextureLoader loaderbodyH = new TextureLoader("C:\\java3d\\head.jpg", "RGB", new Container());
Texture texturebodyH = loaderbodyH.getTexture();
texturebodyH.setBoundaryModeS(Texture.WRAP);
texturebodyH.setBoundaryModeT(Texture.WRAP);
texturebodyH.setBoundaryColor( new Color4f( 1.0f, 1.0f, 0.0f, 0.0f ) );
// Configurer les attributs de la texture
// Param�tres possibles : REPLACE, BLEND ou DECAL (ici, MODULATE)
TextureAttributes texAttrbodyH = new TextureAttributes();
texAttrbodyH.setTextureMode(TextureAttributes.MODULATE);
Appearance apbodyH = new Appearance();
apbodyH.setTexture(texturebodyH);
apbodyH.setTextureAttributes(texAttrbodyH);
//Configurer le mat�riau
apbodyH.setMaterial(new Material(redbodyH, blackbodyH, redbodyH, blackbodyH, 1.0f));
// Cr�er une sph�re pour y appliquer les textures
int primflagsbodyH = Primitive.GENERATE_NORMALS + Primitive.GENERATE_TEXTURE_COORDS;
// End Apparence BODY HEAD
//for the trunk c le corps
TransformGroup fortheTrunk = new TransformGroup();
//will allow to modify object wgile executing
fortheTrunk.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
//alpha rotation time related
Alpha rotationAlpha2=new Alpha(-1,9000);
//behviour for our rotation
RotationInterpolator rotator2= new RotationInterpolator(rotationAlpha2,fortheTrunk);
// area where rotation will be
BoundingSphere bounds2=new BoundingSphere();
rotator2.setSchedulingBounds(bounds2);
fortheTrunk.addChild(rotator2);
//end of rtotation
Alpha transAlphahuman=new Alpha(-1,600);
//transform 3d trans for the interpolatipon HUMANOID
Transform3D transhumanoid=new Transform3D();
//matrix for 2positions
Point3f[] cheminhuman=new Point3f[3];
cheminhuman[0]=new Point3f(0.8f,0.0f,0.0f);
cheminhuman[1]=new Point3f(-0.8f,0.0f,0.0f);
cheminhuman[2]=new Point3f(0.8f,0.0f,0.0f);
//matrix of floats to make the dots match with timeline
float[] timePositionhuman={0.0f,0.50f,1.0f};
PositionPathInterpolator interpolhuman=new PositionPathInterpolator(transAlphahuman,fortheTrunk,transhumanoid,timePositionhuman,cheminhuman);
BoundingSphere bounds4=new BoundingSphere();
interpolhuman.setSchedulingBounds(bounds4);
fortheTrunk.addChild(interpolhuman);
//add the trunk to the branchgroup
Humanoid.addChild(fortheTrunk);
TransformGroup zeTrunk = new TransformGroup();
zeTrunk.addChild(new com.sun.j3d.utils.geometry.Box(.55f,.80f,.50f,
primflagsbody,apbody));
//t3D for the head= bouge up
Transform3D T3DHead = new Transform3D();
T3DHead.set(new Vector3f(0f,1.1f,0f));
//create a tranform group for this t3Dhead
TransformGroup fortheHead = new TransformGroup();
fortheHead.setTransform(T3DHead);
//add the box head
//fortheHead.addChild(new com.sun.j3d.utils.geometry.Box(.20f,.20f,.10f, primflagsbody,apbody));
fortheHead.addChild(new com.sun.j3d.utils.geometry.Sphere(0.35f,primflagsbodyH,apbodyH));
/* I dont need that anymore it was for putting a flat texture on a face. I chose a sphere instead!
//transform 3D for the face
Transform3D T3DFace = new Transform3D();
T3DFace.set(new Vector3f(0f,0f,.14f));
//create a TransformGroup for this Face
TransformGroup Face = new TransformGroup();
Face.setTransform(T3DFace);
//add the child box to the face;
Face.addChild(new com.sun.j3d.utils.geometry.Box(.20f,.20f,.2f,
primflagsbodyH,apbodyH));
//add this face to the head as a child
fortheHead.addChild(Face);
//tranform3d left arm
Transform3D T3DArmL = new Transform3D();
T3DArmL.set(new Vector3f(-0.79f,0.73f,0f));
//create Tranform Group for the leftarm
TransformGroup fortheArmL = new TransformGroup();
fortheArmL.setTransform(T3DArmL);
//add the group for upperarm
TransformGroup ArmL = new TransformGroup();
ArmL.addChild(new com.sun.j3d.utils.geometry.Box(.25f,.14f,.10f,
primflagsbody,apbody));
fortheArmL.addChild(ArmL);
//create a transform3D for the forearmleft
Transform3D T3DForearmL = new Transform3D();
T3DForearmL.set(new Vector3f(-.51f,0f,0f));
//create the tranformgroup for the forearmleft
TransformGroup ForearmL = new TransformGroup();
ForearmL.setTransform(T3DForearmL);
//add the child box to forearm
ForearmL.addChild(new com.sun.j3d.utils.geometry.Box(.20f,.14f,.10f,
primflagsbody,apbody));
ArmL.addChild(ForearmL);
//create transform 3d for the lefthand
Transform3D T3DHandL = new Transform3D();
T3DHandL.set(new Vector3f(-.42f,0f,0f));
//create the child tranform group for the box of the hand
TransformGroup HandL= new TransformGroup();
HandL.setTransform(T3DHandL);
//add the child hand to the forearm
ForearmL.addChild(HandL);
//create the box for the handLeft
HandL.addChild(new com.sun.j3d.utils.geometry.Box(.10f,.140f,.10f,
primflagsbody,apbody));
//Right Arm
//tranform3d right arm
Transform3D T3DArmR = new Transform3D();
T3DArmR.set(new Vector3f(0.79f,0.73f,0f));
//create Tranform Group for the right arm
TransformGroup fortheArmR = new TransformGroup();
fortheArmR.setTransform(T3DArmR);
//add the group for upperarm right
TransformGroup ArmR = new TransformGroup();
ArmR.addChild(new com.sun.j3d.utils.geometry.Box(.25f,.14f,.10f, primflagsbody,apbody));
//com.sun.j3d.utils.geometry.Box.GENERATE_NORMALS,new Appearance()));
fortheArmR.addChild(ArmR);
//create a transform3D for the forearmright
Transform3D T3DForearmR = new Transform3D();
T3DForearmR.set(new Vector3f(.51f,0f,0f));
//create the tranformgroup for the forearmright
TransformGroup ForearmR = new TransformGroup();
ForearmR.setTransform(T3DForearmR);
//add the child box to forearmright
ForearmR.addChild(new com.sun.j3d.utils.geometry.Box(.20f,.14f,.10f, primflagsbody,apbody));
ArmR.addChild(ForearmR);
//create transform 3d for the righthand
Transform3D T3DHandR = new Transform3D();
T3DHandR.set(new Vector3f(.42f,0f,0f));
//create the child tranform group for the box of the hand
TransformGroup HandR= new TransformGroup();
HandR.setTransform(T3DHandR);
//add the child hand to the forearmright
ForearmR.addChild(HandR);
//create the box for the handright
HandR.addChild(new com.sun.j3d.utils.geometry.Box(.10f,.14f,.10f, primflagsbody,apbody));
//Left Leg
//tranform3d left leg
Transform3D T3DLegL = new Transform3D();
T3DLegL.set(new Vector3f(0.43f,-1.23f,0f));
//create Tranform Group for the leftleg
TransformGroup fortheLegL = new TransformGroup();
fortheLegL.setTransform(T3DLegL);
//add the group for uppeleg
TransformGroup LegL = new TransformGroup();
LegL.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.35f,.10f, primflagsbody,apbody));
fortheLegL.addChild(LegL);
//create a transform3D for the downlegleft
Transform3D T3DDownLegL = new Transform3D();
T3DDownLegL.set(new Vector3f(0f,-.70f,0f));
//create the tranformgroup for the downegleft
TransformGroup DownLegL = new TransformGroup();
DownLegL.setTransform(T3DDownLegL);
//add the child box to downlegm
DownLegL.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.25f,.10f, primflagsbody,apbody));
LegL.addChild(DownLegL);
//create transform 3d for the leftfeet
Transform3D T3DFeetL = new Transform3D();
T3DFeetL.set(new Vector3f(.0f,-.45f,0f));
//create the child tranform group for the box of thefeet
TransformGroup FeetL= new TransformGroup();
FeetL.setTransform(T3DFeetL);
//add the child hand to the downleg
DownLegL.addChild(FeetL);
//create the box for the feetLeft
FeetL.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.10f,.15f, primflagsbody,apbody));
//Right Leg
//tranform3dright leg
Transform3D T3DLegR = new Transform3D();
T3DLegR.set(new Vector3f(-0.43f,-1.23f,0f));
//create Tranform Group for the righttleg
TransformGroup fortheLegR = new TransformGroup();
fortheLegR.setTransform(T3DLegR);
//add the group for uppelegR
TransformGroup LegR = new TransformGroup();
LegR.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.35f,.10f, primflagsbody,apbody));
fortheLegR.addChild(LegR);
//create a transform3D for the downlegright
Transform3D T3DDownLegR = new Transform3D();
T3DDownLegR.set(new Vector3f(0f,-.70f,0f));
//create the tranformgroup for the downegright
TransformGroup DownLegR = new TransformGroup();
DownLegR.setTransform(T3DDownLegR);
//add the child box to downlegRight
DownLegR.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.25f,.10f, primflagsbody,apbody));
LegR.addChild(DownLegR);
//create transform 3d for the rightfeet
Transform3D T3DFeetR = new Transform3D();
T3DFeetR.set(new Vector3f(.0f,-.45f,0f));
//create the child tranform group for the box of thefeetright
TransformGroup FeetR= new TransformGroup();
FeetR.setTransform(T3DFeetR);
//add the child feet right to the downleg
DownLegR.addChild(FeetR);
//create the box for the feetright
FeetR.addChild(new com.sun.j3d.utils.geometry.Box(.16f,.10f,.15f, primflagsbody,apbody));
//rajoute la box zetrunk et des fils
fortheTrunk.addChild(zeTrunk);
fortheTrunk.addChild(fortheHead);
fortheTrunk.addChild(fortheArmL);
fortheTrunk.addChild(fortheArmR);
fortheTrunk.addChild(fortheLegL);
fortheTrunk.addChild(fortheLegR);
//DEBUT CUBE
//beginning of rotation
TransformGroup objSpin=new TransformGroup();
//create transform 3d for box which spin
Transform3D T3DobjSpin = new Transform3D();
T3DobjSpin.set(new Vector3f(-2.50f,.45f,0f));
//create the child tranform group for the box which spin
objSpin.setTransform(T3DobjSpin);
//will allow to modify object while executing
objSpin.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
//alpha rotation time related
Alpha rotationAlpha=new Alpha(-1,900);
Alpha transAlpha=new Alpha(-1,900);
//transform 3d trans for the interpolatipon
Transform3D trans=new Transform3D();
//matrix for 2positions
Point3f[] chemin=new Point3f[3];
chemin[0]=new Point3f(-2.8f,0.40f,1.0f);
chemin[1]=new Point3f(-0.8f,0.40f,1.0f);
chemin[2]=new Point3f(-2.8f,0.40f,1.0f);
//matrix of floats to make the dots match with timeline
float[] timePosition={0.0f,0.50f,1.0f};
PositionPathInterpolator interpol=new PositionPathInterpolator(transAlpha,objSpin,trans,timePosition,chemin);
BoundingSphere bounds3=new BoundingSphere();
interpol.setSchedulingBounds(bounds3);
objSpin.addChild(interpol);
//behviour for our rotation
RotationInterpolator rotator= new RotationInterpolator(rotationAlpha,objSpin);
// area where rotation will be
BoundingSphere bounds=new BoundingSphere();
rotator.setSchedulingBounds(bounds);
objSpin.addChild(rotator);
//end of rtotation
//add transform group objspin to branchgroup humanoid
Humanoid.addChild(objSpin);
//test a cube which heritate of this rotation?
objSpin.addChild(new ColorCube(0.25));
//test
//module cube + transparency
// create an ALPHA transparency apparence (invisible)
Appearance app0x=new Appearance();
app0x.setColoringAttributes(new ColoringAttributes(new Color3f(0.3f,0.2f,1.0f),ColoringAttributes.SHADE_GOURAUD));
app0x.setTransparencyAttributes(new TransparencyAttributes(TransparencyAttributes.NICEST,0.5f));//0.5f represente 50% de transparence
// create the blue sphere which rotate
Transform3D transsphere=new Transform3D();
transsphere.set(new Vector3f(0.0f, -0.1f, 0.3f));
TransformGroup TGsphere=new TransformGroup(transsphere);
TGsphere.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
objSpin.addChild(TGsphere);
//objRotatecube.addChild(TGsphere);
TGsphere.addChild( new Sphere(0.3f,app0x) );
//End Module Cube + Transparency
//END CUBE
//DEBUT WHOLE BIRD
//beginning of Rotation for Bird
TransformGroup Bird=new TransformGroup();
//will allow to modify object while executing
Bird.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
//alpha rotation time related
Alpha rotationAlphaBird=new Alpha(-1,400);
Alpha transAlphaBird=new Alpha(-1,5990);
//transform 3d trans for the interpolatipon
Transform3D transBird=new Transform3D();
//create transform 3d for the Bird
transBird.set(new Vector3f(1.90f,-.45f,0.9f));
//create the child tranform group for the Bird Box
Bird.setTransform(transBird);
//matrix for 2positions
Point3f[] cheminBird=new Point3f[3];
cheminBird[0]=new Point3f(1.95f,0.0f,-6.8f);
cheminBird[1]=new Point3f(1.95f,0.90f,-0.8f);
cheminBird[2]=new Point3f(1.95f,0.0f,5.8f);
//matrix of floats to make the dots match with timeline
float[] timePositionBird={0.00f,0.50f,1.0f};
PositionPathInterpolator interpolBird=new PositionPathInterpolator(transAlphaBird,Bird,transBird,timePosition,cheminBird);
BoundingSphere bounds3Bird=new BoundingSphere();
//BoundingSphere bounds3Bird= new BoundingSphere(new Point3d(0.0, 0.0, -50.0), 0.5);
interpolBird.setSchedulingBounds(bounds3Bird);
Bird.addChild(interpolBird);
//behviour for our rotation
RotationInterpolator rotatorBird= new RotationInterpolator(rotationAlphaBird,Bird);
// area where rotation will be
BoundingSphere boundsBird=new BoundingSphere();
rotatorBird.setSchedulingBounds(boundsBird);
Bird.addChild(rotatorBird);
//end of rotation For Bird
//add transform group objspin to branchgroup humanoid
Humanoid.addChild(Bird);
//debut test APPARENCE Wing Left
//test textures
// Configurer les couleurs
Color3f blackx = new Color3f(0.0f, 0.0f, 0.0f);
Color3f whitex = new Color3f(1.0f, 1.0f, 1.0f);
Color3f redx = new Color3f(0.7f, .75f, .75f);
// Configurer la texture
TextureLoader loaderx = new TextureLoader("C:\\java3d\\pois.jpg", "RGB", new Container());
Texture texturex = loaderx.getTexture();
texturex.setBoundaryModeS(Texture.WRAP);
texturex.setBoundaryModeT(Texture.WRAP);
texturex.setBoundaryColor( new Color4f( 0.0f, 1.0f, 0.0f, 0.0f ) );
// Configurer les attributs de la texture
// Param�tres possibles : REPLACE, BLEND ou DECAL (ici, MODULATE)
TextureAttributes texAttrx = new TextureAttributes();
texAttrx.setTextureMode(TextureAttributes.REPLACE);
Appearance apx = new Appearance();
apx.setTexture(texturex);
apx.setTextureAttributes(texAttrx);
//Configurer le mat�riau
apx.setMaterial(new Material(redx, blackx, redx, blackx, 1.0f));
int primflagsx = Primitive.GENERATE_NORMALS + Primitive.GENERATE_TEXTURE_COORDS;
//End test APPARENCE Wing Left
//test a cube which heritate of this rotation?
// Bird.addChild(new ColorCube(0.8));
//test bird body
// Bird.addChild(new com.sun.j3d.utils.geometry.Box(.25f,.22f,.45f,
// com.sun.j3d.utils.geometry.Box.GENERATE_NORMALS,new Appearance()));
Bird.addChild(new com.sun.j3d.utils.geometry.Box(.25f,.22f,.45f, primflagsx,apx));
//test WingRightBird
//create a transform3D for the BirdWIngR
Transform3D T3DBirdWingR = new Transform3D();
T3DBirdWingR.set(new Vector3f(0.45f,.0f,-0.35f));
//create the tranformgroup for the BirdWIngR
TransformGroup BirdWingR = new TransformGroup();
BirdWingR.setTransform(T3DBirdWingR);
//add the child box to BirdWIngR
// BirdWingR.addChild(new com.sun.j3d.utils.geometry.Box(.43f,.07f,.22f,
// com.sun.j3d.utils.geometry.Box.GENERATE_NORMALS,new Appearance()));
//End test WingRightBird
////////comments/////////
//beginning of Rotating WINR
//----------------------d�but de la cr�ation de la rotation--------------------------------
TransformGroup WinRSpin=new TransformGroup();
// permet de modifier l'objet pendant l'execution
WinRSpin.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
// on cr�e un fonction de rotation au cours du temps
Alpha rotationAlphaWinRSpin=new Alpha(-1,1000);
Transform3D rot = new Transform3D();
rot.rotX((float)Math.PI/- 2.0f);
//rot.rotX(-45);
//rot.rotX((-Math.PI / 4.0)+30);
//rot.rotZ((-Math.PI / 4.0));
//rot.rotX(-Math.PI / 4.0);
//rot.rotY(-Math.PI / 4.0);
// rot.rotZ(-Math.PI / 4.0);
// rot.rotY(00);
//rot.rotZ(45);
// on cr�e un comportement qui va appliquer la rotation � l'objet voulu
// on d�finit la zone sur laquelle va s'appliquer la rotation
//RotationInterpolator rotatorWinRSpin=new RotationInterpolator(rotationAlphaWinRSpin,WinRSpin, rot, 0.50f,(float)(2.0*Math.PI));
RotationInterpolator rotatorWinRSpin=new RotationInterpolator(rotationAlphaWinRSpin,WinRSpin, rot, 25,26);
BoundingSphere boundsWinRSpin=new BoundingSphere(new Point3d((Math.PI / 4.0), 0.0, 0.0), 0.5);
// boundsWinRSpin.setCenter(new Point3d((Math.PI / 4.0),0,0));
boundsWinRSpin.setCenter(new Point3d(-10,0,0));
//boundsWinRSpin.setCenter();
//test put a t3d to a boundingsphere??
//Transform3D T3Dbounding = new Transform3D();
// T3Dbounding.set(new Vector3f(5.00f,0.0f,0.00f));
//WinRSpin.setTransform(T3Dbounding);
//end test put a t3d to a boundingsphere, not working
rotatorWinRSpin.setSchedulingBounds(boundsWinRSpin);
// test BoundingSphere of BODY BIRD rotatorWinRSpin.setSchedulingBounds(boundsBird);
WinRSpin.addChild(rotatorWinRSpin);
//----------------------End de la cr�ation de la rotation--------------------------------
BirdWingR.addChild(WinRSpin);
// on cree un cube qui h�rite de la rotation
//WinRSpin.addChild(new ColorCube(0.5));// de rayon 50 cm
WinRSpin.addChild(new com.sun.j3d.utils.geometry.Box(.43f,.07f,.22f, primflagsx,apx));
//End of Rotating WINR
//////// END comments/////////
//I commented the following, that was the TEST sinusoidal, rotation which help me understood how to rotate wingR
// -----------d�but de cr�ation de la rotation--------------------------------------------------
TransformGroup objSpinxx=new TransformGroup();
// permet de modifier l'objet pendant l'execution
objSpinxx.setCapability(TransformGroup.ALL

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Secured websites check antivirus from ipad to get connected and unable to find the required in itfo from ipad2. how to solve

Secured webites check antivirus from ipad or its browser safari to get connected . any one has solution for this issue?

SirThanks for the reply but still i feel something can be done. i am talking about remote connec to
office server wherein we have login id and password . while inputing that the website checks the browser of
ipad2 and asking us to install antivirus to proceed further. if ipad2 is so secure ( yes it should be so secured)
then whey don't it handsake with the website properly and allow us to proceed.
is it possible to throw more light on this tks

Error:-could not find the main class programe will exit(Java virtual mach)

Hi,
i changed the mainfest file for an executive jar file(judge.jar) using the command on dos :-"jar cvfm judge.jar c:\judge\MAINFEST.MF -C judge/ ." , but when i run this jar file again after making changes in mainfest file it is not working. an error encounter like "could not find the main class programe will exit how to solve"(Java virtual machine launcher).please suggest me how to solve this error.
Thanks
Ashwani Gupta

Hi,
mainfest file has a entry like "main -class: judge.repository.corpus"
please tell me the solution of this error i am doing internship in national university of singapore......and my project is related to data mining.I am using judge.jar when i extract this jar files i saw there was no main-class in manifest file so i change it and make it again jar file using dos command.please suggest me how i can reomove this error.
Thanks in advance.
Ashwani

Unable to find the calculation manager option in menu

Hi All,
I configured calculation manager in my machine [version: 11.1.2]. I am unable to find the calulation manager option in the menu[Navigate->Administer->calculation manager].
calculation manager is up and running . Kindly guide me to overcome it.
Thanks and Regards
ChiDam

If calc manager was installed after the web configuration, re-run the web comfiguration step. You may also need to cycle the OHS service on foundation afterwards.
Regards,
John A Booth

When clicking on the Finder icon in the dock the Main Menu grays out ... what's wrong ... how do I fix?

Product: iMac, OS X 10.9.5 (13F34)
Processor: 3.5 GHz Intel Core i7
Memory: 32 GB 160 MHz DDr3
Storage: 3.12 TB Fusion Drive
PROBLEMS:
1. When clicking on the Finder icon in the dock, the main menu grays out and the window with documents, applications etc., does not pop up.
2. iMac is not showing up in iCloud.com and, not syncing with my MacBook Pro, iPad Mini and iPhone.
This situation seemed to appear after doing updates on my iMac.
TROUBLESHOOTING I'VE TRIED:
1. rebooted,
2. repaired permissions,
3. booted in safe-mode and let the basic tests run then rebooted to normal mode. Afterwards, the problem seemed to be corrected, however, it re-appeared shortly thereafter and still exists.

Go to the Finder's General preference pane and reset the New Finder windows show: option. Try changing it to some other folder, try it and then back again.
If that doesn't jump start it try moving the com.apple.finder.plist file from your Home/Library/Preferences folder to the Desktop, reboot and then reset the Finder preferences.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

I have just connected my new apple tv, in the main menu I see only two icons; "computers" and "settings". Where do I find the icons for internet, movies etc. We do not live in the US..

I have just connected my new apple TV and in the main menu see only two icons: computers and settings. How do I access the rest of the icons (internet, movies etc...) We do not live in the US. The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.

Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
Reading through the threads my take is
There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
Power off, reset and factory restore doesnt seem to solve it
Occasionally its nearby antenna cables etc causing interference
One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
Plugging in ethernet works, this is purely a wifi issue
Sometimes plugging in ethernet temporararily wakes up the wifi
Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.

Not able to find App World in the main Menu

I am not able to see blackberry app world in the main menu after the update. I have tried all the options as mentioned in the forum. I am using Bold 3 9780 blackberry verion 6.0
Please provide a solution as I am not able to download anything.

I don't know what you've tried at this point.
You could try loading from http://rroyy.com/ota/ using the blackberry browser or
try to install it using the desktop manager: http://www.youtube.com/watch?v=8Fn1T5D_Vw0
It should be listed, but can't verify this.
An extreme fix is to reload the OS.
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Can't find the Slideshow option under Photo from the main menu

I have downloaded pics to my Ipod Nano and successfully viewed them in the past.
Accessing the Photo Option from the Main Menu, the only option I see is for Slideshow Settings. The option for actually playing a Slideshow seems to have disappeared.
Any ideas?

Have you tried
Settings >Main Menu
make sure Photo is set to ON

Could not find the main class: oracle.ide.boot.Launcher. Program will exit

Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PM

I was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi

Unable to find the report in the manifest resources

Hi!I have problem using Crystal Report documents created in Visual Studio 2005 using the build-in version of Crystal Reports. If I create a project from scratch with one report and then some code to initialize and export the report to disk I get the following error message:"Unhandled Exception: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Unable to find the report in the manifest resources. Please build the project, and try again."I have tried using both the "Embedded resource" and the "Content" options during build, but with no luck at all. When using the Content option I explicitly load the rpt-file but no luck at all. Do anyone have a clue to what the problem is? I have absolutely no idea. The things worked in Visual Studio 2003 but not in 2005. What is the manifest resource?Would really appreciate some help, thanks in advance!My source code is below.Best regards Larsclass Program { public static TableLogOnInfo CreateConnectionInfo(string userID, string password, string serverName, string databaseName) { TableLogOnInfo conInfo = new TableLogOnInfo(); conInfo.ConnectionInfo.UserID = userID; conInfo.ConnectionInfo.Password = password; conInfo.ConnectionInfo.ServerName = serverName; conInfo.ConnectionInfo.DatabaseName = databaseName; return conInfo; } public static ReportClass CreatePersonalWillReport(TableLogOnInfo conInfo, string personID) { ReportClass doc = new ReportClass(); doc.Load(@"C:\Utveckling\reports\main\ClassLibrary1\bin\Debug\CrystalReport1.rpt"); List<ReportParameter> parameters = new List<ReportParameter>(); parameters.Add(new ReportParameter("@personID", personID)); return ApplyReportParameters(doc, parameters, conInfo); }   public static void ExportReportToDisk(string fileName, ReportClass report, ExportFormatType formatType) { report.ExportToDisk(formatType, fileName); } protected static ReportClass ApplyReportParameters(ReportClass report, List<ReportParameter> paramList, TableLogOnInfo conInfo) { foreach (Table t in report.Database.Tables) { t.ApplyLogOnInfo(conInfo); } foreach (Section s in report.ReportDefinition.Sections) { foreach (ReportObject ro in s.ReportObjects) { if (ro.Kind == CrystalDecisions.Shared.ReportObjectKind.SubreportObject) { SubreportObject sro = (SubreportObject)ro; ReportDocument doc = sro.OpenSubreport(sro.SubreportName); foreach (Table t in doc.Database.Tables) { t.ApplyLogOnInfo(conInfo); } } } } foreach (ParameterFieldDefinition paramField in report.DataDefinition.ParameterFields) { foreach (ReportParameter rp in paramList) { if (paramField.Name == rp.Name) { ParameterValues pv = paramField.CurrentValues; string s = (string)rp.Value.Value; ParameterDiscreteValue pdv = new ParameterDiscreteValue(); pdv.Value = s; pv.Add(pdv); paramField.ApplyCurrentValues(pv); } } } return report; }  static void Main(string[] args) { TableLogOnInfo conInfo = CreateConnectionInfo("username", "password", "server", "database"); ReportClass report = CreatePersonalWillReport(conInfo, "-1291000956"); ExportReportToDisk("C:\temp\report.pdf", report, ExportFormatType.PortableDocFormat); }/// <summary>/// Helper class that contains parameter key/value pairs./// </summary>protected class ReportParameter {/// <summary>/// The parameter name./// </summary>private string name = null;/// <summary>/// The parameter value./// </summary>private ParameterDiscreteValue value = new ParameterDiscreteValue();/// <summary>/// The parameter name./// </summary>public string Name {get {return this.name;}set {this.name = value;}}/// <summary>/// The parameter value./// </summary>public ParameterDiscreteValue Value {get {return this.value;}set {this.value = value;}}/// <summary>/// The constructor./// </summary>/// <param name="name">the parameter name</param>/// <param name="value">the parameter value</param>public ReportParameter(string name, object value) {this.name = name;this.value.Value = value;}}

Lars,
Â Have you read the CRnet_deployment.doc if not it may help fix your problem (It didnt mine but hey you may be lucky) See http://support.businessobjects.com/communitycs/technicalpapers/crnet_deployment.pdf
I have a similar issue but in 2003.net using the bundled CR package. I'm trying to use CR in a Web Service called from a Compact Framework device. I've confirmed I'm using the correct Merge Modules & my Build Actions are all set as stated in the CR Application Deployment document but it still spits out Unable to find the report in the manifest resources
I've looked extensively on the net and while others have had this problem the only advice I've seen revolves around embedded build actions and using the correct merge modules. There must be something else causing this problem and some one who has found a way round it?!?
If your that someone please take 5 minutes out and help a couple of guys in distress?
Thanks in advance,
Ian

Could not find the main class : HelloWorldApp program will exit

please help me
i downloaded and installed jdk-6u13-windows-i586-p(1) from sun.java.com
in my computer --> Advanced --> environment variables --> i had set
user variable :
variable value
java_home C:\Program Files\Java\jdk1.6.0_13\bin
System variable:
path : C:\Program Files\Java\jdk1.6.0_13\bin
after that i wrote a program
* The HelloWorldApp class implements an application that
* simply prints "Hello World!" to standard output.
class HelloWorldApp {
public static void main(String[] args) {
System.out.println("Hello World!"); // Display the string.
i saved in c:\ mywork
i compiled it with
javac HelloWorldApp.java and then
java HelloWorldApp
output / result also came
but iam unable to create jar file . when it is created it is showing
could not find the main class : HelloWorldApp program will exit
i created jar file by following way
i created
manifest.txt
Min-Class : HelloWorldApp and then
start -->run--> cmd-->
c:\mywork> jar cfm test.jar manifest.txt HelloWorldApp.class
c:\ java -jar test.jar
but it displays a message
" could not find the main class : HelloWorldApp program will exit "
please please please help me please 1000's of please help me

Peter__Lawrey wrote:
You have to specify the manifest with a special option (I think its was -M)
Otherwise the jar will create one (even if you provide it)No, the text file passed as a parameter will be incorporated in the manifest file generated by the JAR tool.
@OP: This will work:
JarTest.java
public class JarTest {
public static void main(String[] args) {
System.out.println("JarTest works!");
}manifest.txt
Main-Class: JarTest+(note there is an extra new line in the manifest.txt!)+
Now execute these commands:
javac JarTest.java
jar cfm MyJar.jar manifest.txt JarTest.class
java -jar MyJar.jar And on my machine, the string "JarTest works!" is displayed on the screen.
And if you look in the MANIFEST.MF file inside your jar file (you can use almost any zip-utility for this), you will see the following:
Manifest-Version: 1.0
Created-By: 1.6.0_0 (Sun Microsystems Inc.)
Main-Class: JarTestOr something similar.

Unable to find the IDOC number in WE02

HI All,
I have executed an outbound program from SM37 and i can see that job got finished in the log.
but when i check the spool, it doesnt contain any list and also i am unable to find the Idoc number in WE02.
I am not clear in this. Please expalin me in detail.

Hi there,
Go to Sales order screen, In the main screen below the command line, one button will be there " Services for object" Click that...... It will open one tool bar.... on that tool bar one icon will be there with thee arrow ..... Click on that,,,,, and here you can see the idoc number....
Thanks,
Raja

I am unable to find the main menu on my android, how is it acessed

Similar Messages

Maybe you are looking for