I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

When trying to connect with another iPad or iPhone user it tells me they are unavailable even when they are

I am having trouble connecting with people on FaceTime. When I try to connect with them using their email address it will come back saying they are not available when I know they are.

The question is, Do they have the emai address that you are using configured as a, "You can be reached by Facetime at:" in Settings > Facetime?
Of course they may be just choosing not to accept your call.

Hi guys, i updated my i4 with ios6.1 through my pc. but afetr update its not getting booted

Guys please help me in this problem, my phone is not getting booted, i just updated ios6.1, after updation its not booting

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
You might need to do a few times. Be patience.

TS3367 I am using Ipad mini face time with another Ipad user in Shanghai, but after a few seconds, I got black screen, saying poor connection and that's it. Very frustrated. Any idea?

I am having problems of using Face time. I signed in and connected with another Ipad Mini in Shanghai, but while the other side could see me all the time, my screen turned black after a few seconds, and saying "poor connection". It happened all the time, I started to use skype, but it is crazy of having a new mini, and having this device. It is very frustrating.

Find a location with a faster Internet connection. The slow connection message is telling you you have a slow connection or one that's too busy.

Error - unable to establish JCO connection with SSO

Hello,
I have implemented XSS on WebDP and this is working fine. So my JCO connections SAP_R3_HumanResources must be configured correctly. However I have just done the 'GetFlight' BAPI tutorial and upon execution I get the error:
'com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.sap.tut.wd.flightlist.model.FlightModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!'
CAUSED BY
'User not authenticated (is anonymous) - unable to establish JCO connection with SSO'
Can anyone help here?
Thanks
Mr.T

HI
GOOD
GO THROUGH THIS LINK WHICH CONTAINS THE A SINGLE SIGN-ON IN A COMPLEX SYSTEM LANDSCAPE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
http://www.sap-press.de/download/dateien/1020/sappress_sap_security_authorizations.pdf
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
THANKS
MRUTYUN

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without.

How to get kensington K9294 to connect with original iPad. Bluetooth is on.

How to get Kensington K9294 to connect with original iPad. Bluetooth is on.

Sorry, but what is a Kensington K9294? I can find no mention of that product ID on the web, not even on Kensington's site. Do you mean the K39294, the KeyFolio keyboard/case?
Regards.

ERROR http: 5: Unable to initialize ssl connection with server, aborting co

HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AM

oracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
   Oracle Enterprise Manager 10g Database Control commands:
        emctl start | stop dbconsole
        emctl status | secure | setpasswd dbconsole
        emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
       emctl status agent
       emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
       emctl getversion
       emctl reload | upload | clearstate | getversion agent
       emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
       emctl config agent <options>
       emctl config agent updateTZ
       emctl config agent getTZ
       emctl resetTZ agent
       emctl config agent credentials [<Target_name>[:<Target_Type>]]
       emctl gensudoprops
       emctl clearsudoprops
Blackout Usage :
       emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
       emctl stop blackout <Blackoutname>
       emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
        emctl getemhome
        emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
     [-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
     [-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
     [-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
     [-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor>

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

My HP laptop recently 'crashed' and had to be reset to factory settings. I've tried to re-download i-tunes but nothing seems to be happening. My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

Hi, Primmy1.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
o Connection Type: Infrastructure
o Wireless Security Type:
AirPort Setting = PC Setting
o WEP = WEP
o WPA Personal = WPA-PSK w/TKIP
o WPA2 Personal = WPA-PSK w/AES

Can't get Time Capsule to access internet through 2wire router / modem with AT

I have internet service provided by AT&T Uverse. AT&T provides a 2 wire combination modem / router. My Time Capsule will connect to my internal network but will not connect to the internet. I have a steady green indicator light on the Time Capsule. Can anyone offer any assistance?

Time Capsule & AT&T 2Wire Gateway Model: 3800HGV-B
Instructions on connecting your Time Capsule to an AT&T 2Wire Modem Model: 3800HGV-B. I do know if these instructions will work for other models. Some 2Wire models require it to be set in “Bridge-Mode” or a “Router-Behind-Router”. The 3800HGV-B model does not have the ability to be put into “Bridge-Mode”. After hours of frustrating tech support calls, mine is finally working, so I thought I would share what worked for me. Why something like this isn’t already posted, I have no idea? Although I may not have all the terms correct, I think I can explain it in a way to help others the way I wish someone could have helped me. Something this simple, shouldn’t be so hard.
The Situation
Those with AT&T U-verse are unable to connect their Time Capsule to Network.
The Problem
Apple & AT&T’s Tech Support have failed to provide solutions.
The Solution
To configure the AT&T 2Wire with the Time Capsule the 2Wire must have its router disabled, in addition to disabling both the 2Wire and Time Capsule Firewalls. The goal is to get these two device to play well with each other. The challenge is that the 2Wire Modem is both a router and a modem. The Time Capsule is also a router, so they compete with each other, thus creating the headache many of us have experienced.
Step One: Create a wireless network.
Connect your DSL or cable modem to the Ethernet WAN port on your Time Capsule.
Open Airport Utility, select Time Capsule, and click Continue.
Follow the onscreen instructions to create your new network.
Once you have finished the above steps, make sure your screens look similar to mine. Once you have the Time Capsule set up according to the directions, you still won’t have internet connection. Be sure there is a “checkmark” next to your new newly created Network.
The Situation
This above process should have set the Time Capsule in a DHCP mode, thus making it ready to receive the signal/ IP address sent by the 2Wire.
Step Two: Allow DMZplus mode
    Open your web browser and enter the address http://192.168.1.254/ This will take you to the 2Wire settings. Select Settings, click Applications, Pinholes, and DMZ. At the bottom of the page, select Allow all applications (DMZplus mode). Click Save.
Note: Once DMZplus mode is selected and you click save, the system will issue a new IP address to the selected computer. The computer must be set to DHCP mode to receive the new IP address from the system, and you must reboot the computer. If you are changing DMZplus mode from one computer to another computer, you must reboot both computers.
The 2Wire Wireless Setting must be disabled. You don’t want the 2Wire to broadcast its wireless signal. You must shut off the “Router” abilities of 2Wire. In the U-verse 2Wire Settings, select the Firewall tab, click Applications, Pinholes and DMZ. At the bottom of the page select the radio button which Allows all applications (DMZplus mode).
You will know when you are successful at shutting the wireless down by selecting the Airport Signal in the upper right of your screen. If you see a network called 2Wirexxx, then your 2Wire is still broadcasting its signal.
The Time Capsule is setup in the DHCP mode, but isn’t able to get the IP Address because there are 2 Firewalls to address. There is the firewall of the 2Wire and one for the Time Capsule.
Step Three: Disable the Firewall.
    One thing all the other tech’s missed, was unchecking the “Enable default host at”. Your screen should look like the below screen shot, because this disables the other Firewall that is giving you trouble. Be sure and Update after you make your changes.
    Once the changes are complete, turn the Airport off. Shut down your computer. Unplug the 2Wire and the Time Capsule and let them sit for 5 min. Next, plug the 2Wire up first and let it begin its reboot process. Then, plug in the Time Capsule and let it start to reboot. Finally, turn on your computer and open Airport Utility.
   Finally, after a complete reboot of the system, try to connect the internet. You should now be capable of opening your system and enjoying your online experience.
I hope this helps!

TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

Similar Messages

Maybe you are looking for