I am unable to send emails using apple mail, but can still receive

A very odd situation this.  I have a couple of POP3 accounts and an Exchange server account.  All was going well until a few days ago when all my accounts stopped sending mail, but still continued to receive mail.  I have removed each account and restored it but this hasn't worked, the timer is constantly spinning against the 'Sent' header.  All these accounts work in their webmail version so I have to conclude the fault is with Apple Mail.  Can anyone help please?  Thanks.

Troubleshooting Mail.
http://support.apple.com/kb/ts3899

Similar Messages

  • Can't send email using Apple Mail with Verizon

    My Verizon settings in my Apple Mail program will not send mail. I am using my correct password and userid for authentication. I use outgoing.verizon.net server and port 587. Should I be using a different port setting?

    port 110 is the port number for the incoming (pop) mail server, port 25 is the port number for the outgoing (smtp) mail server. If they were insisting that you use port 110 for the outgoing (smtp) mail server, that is because the tech support rep with whom you spoke was not a very clueful person. These are established standard port numbers for those services.
    PS- should you have found anyone's post in this thread helpful to you, like Jim's, consider clicking the "helpful" or "solved" buttons in the header of said posts and if you don't click the "solved" button ("helpfuls" alone don't mark a thread as "answered"), then also consider marking this thread as "answered" for the benefit of others searching out a solution to a similar problem with their Verizon Mail configuration.

  • TS3899 Cannot send mail, but can still receive mail.  Solution?

    Cannot send an email but can receive one.  Solution?

    Hi,
    I'm having the same problem as Ed. "smtp.me.com" send error.
    When I got the iPhone I followed mobileme sync between my computer and the iPhone from iTunes.
    My mobileme sends and receives mail from my Mail app on my computer.
    I tried to change the SSL server port # on the iPhone but it is grey and not able to be changed. I think port #25 works too. But, mail on my computer uses 587 which the iPhone is set to, but it's not working.
    I can send and receive mail from my yahoo and another POP3 account.
    Any ideas of how I can get my mobileme mail to send on my iphone? Thanks.

  • Since 2 days can't send emails via Apple Mail

    Hi,
    for 2 days now I'm unable to send emails from Apple Mail.
    I have an Hotmail account (using POP3) and a WEB.DE account (using IMAP) connected with Mail. Every time I try to send an email Mail tells me the SMTP server are offline. My mobile.me account though works properly.
    To exclude problems with certain ports on my WLAN router I tried to use Thunderbird on my Windows PC with these accounts. Sending emails this way wasn't a problem at all.
    Also deleting all accounts and setting them up again didn't make a change...
    Even changing the OS back from Lion to SL hasn't made an impact.
    Any suggestions what might cause this weird problem?

    Hello P:
    Since each one is different, I suspect the best answer to your question lies with your ISP.
    Barry

  • I am unable to send emails using iCloud, but am receiving.

    I am unable to send emails using iCloud from both my laptop and my ipad.  I am paying for 25Gb of storage and am only using 3Gb at the moment.  I get the following message " Your email has been placed in the Outbox as you have exceeded your limit for sending emails".  I have not sent any emails today at all!

    http://support.apple.com/kb/ht4863
    Or contact Apple:  https://getsupport.apple.com

  • I am unable to receive or send emails, have apple mail version 4.6 (1085) and snow leopard, OSX 10.6.8

    I am unable to receive or send emails, have apple mail version 4.6 (1085) and snow leopard, OSX 10.6.8, MacBook Incoming mail server “mail.me.com” is greyed out How do I resolve this problem? All help appreciated [email protected]

    Try these server settings.
    Mail Server Information

  • I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

    I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

    Do I need to delete all my email accounts and start again?

  • Problem with Thunderbird email: When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others rece

    Problem with Thunderbird email:
    When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
    Bob Greenman

    Are you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.

  • Can't send email through Apple mail

    I suddenly am not able to send email through Apple mail on my MacBookPro.  ipad and iphone still working.  I can also send email through att online.  My email is @att.net, and the message says "The server cannot be contacted on port 465".  (That is the proper port)

    Hi,
    Here are some suggestions,
    1. Try downloading another free email client to see if it works from there, just to eliminate other possibilities.
    2. Try removing the account in mail settings, and adding it again with the correct settings.
    Let me know what you find!
    Nolan

  • When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Group emails using Apple Mail

    From time to time I like to inform about 40 people that I have updated my iWeb site. To do this, I have assembled a 'group' of addresses and I send the update information to them.
    It does not appear to be possible to do this using Apple Mail. I have tried breaking the group down into small bite sizes but poor old Mail just can't hack it. It is not up to the job using an internet connection in Australia or in Canada.
    Creating such a group using Gmail Mailplane) does not seem to be possible. Indeed that is a distinct deficiency with an otherwise splendid facility.
    I am always obliged to fall back on my dusty old copy of Entourage which does the job flawlessly. Unfortunately, Entourage does not send the sexy update message so handily supplied by iWeb.
    I have just gone through this again today. Mail did not hack it. It first tried to use the Gmail SMTP server and then the old Dotmac one and finally my ISP provider's outgoing mail server. None of thse worked. Error messages about time outs on Port 25 arrived.
    It would be nice to have the various Apple products working together seamlessly but, in my hands, this is not the case.
    I am using the latest version of all software.
    Any suggestions will be gratefully received and acknowledged.
    David Amies

    Thank you for your time.
    Once one has updated iWeb a three pronged invitation appears on the screen. One of these invites you to 'announce' your changes. If you click on that, Apple Mail fires up with a pre-printed message and a nice little logo. It is up to you to insert any addresses to which you might care to send the notification of your up date.
    Now, I have created a group of addressees in Address Book that I call Blog Group 1. I have arranged this group such that the addresses of members are concealed from other members. This you can do in Apple Mail preferences under 'composing.'
    I then press the send button. Wheels spin and the machine whirrs and I receive a message that it can't be sent and that I should use another server. It supplies a list of possibilities. I try them all with the same lack of success. I no longer have the exact error message to hand and could only get it by sending my stuff out again and thereby unnecessarily bothering my correspondents.
    After messing around with all of this, I use precisely the same group with Microsoft Entourage and hey presto! it works.
    If I can send group emails with Entourage but not with Apple Mail then I hardly think that this can be an issue with my ISP. (I tried to phone tech support today to clarify the point but they are down!)
    Why then not use Entourage and be done with it, I hear you cry? For reasons that I cannot explain, I try to avoid using Microsoft products unless there is no alternative. Apple purports to have nicely integrated software and so why not use that?
    Do you now follow my problem? If you have any further insights, I shall be more than happy to hear them.
    Once again, thank you for your time.
    Cordially,
    David Amies

  • Can't Send email w/Apple Mail connected to Exchange Server 2007

    I've tried to connect to our OWA Exchange server w/Entourage and nobody can help me to make it work. I can connect w/Apple Mail and recieve fine, but I can't send email. Any ideas or suggestions on how to allow me to send out email w/Apple Mail??

    Hello:
    I have the same issue. I am on a Macbook Pro 2 Gb RAM Rev A. OS X 10.5.3 apple mail 3.3. I have setup a corporate exchange owa (2007) account and can receive emails. I cannot send any from this exchange account. on the same Mac I have Entourage and it can receive and send emails. What is the difference and what do I have to do to make Apple Mail work and be able to send emails as well.
    Thanks,
    [email protected]

  • Can no longer send email from my accounts but can receive

    I have 5 email accounts set up on my imac. 3 are mine 2 are my partners. I can no longer send emails from my accounts but my partner still can. They all still receive mail but when I attempt to send mail I get:-
    Cannot Send Message Using Server
    Then i'm asked to select a different server from a list. I have tried all but to no avail.
    I first of all deleted my partners sky.com account because it appeared to me that this was maybe overiding all other accounts and it was no longer needed on imac.
    I then deleted one of my accounts - hotmail, to see if i added it again maybe it would work but now I cant even re add the mail account as everytime i go to mail, preferences account to set it up again the initial screen comes up with my partners details including the sky.com username and when i overwrite these and try to install hotmail acount I get told that logging in failed check user name and password is correct. Which they are.
    All used to work fine but now I have these problems, they appeared to have started when my partner set up an icloud account and is synching with this - could this be the cause?
    I can send email from my accounts from iphone still but no longer from imac.

    First,
    I'd run all availiable software updates. After that, I would try removing all of the accounts from "Mail", and then re-adding them. Be aware that if your folders and such are located on your mac, and not on the mail servers, you may risk lose some information (always have a back-up).
    Sometimes, when you have a number of e-mail account there can be server issues abound. I would go into the server lists and make sure that they are set properly. If you see the "use only this server" box, check it for each of them.

  • All of a sudden I cannot send mail but I still receive it. Help?

    All of a sudden I cannot send mail although I still receive.  Anyone have an answer to this?

    Do you get an error message?
    You can go back into the mail account settings and scroll to the outgoing mail server and see if you can enter a password, same one as your incoming mail server.

  • Sending email using apple script...

    I have created a watch folder using apple script that when a file is dropped on it, it automatically opens, formats, and sends out a custom email.
    What I don't understand is, how can I include multiple variables in the "content" section (also known as the body section of the email)? I want to put custom type in the content section that says "There is a file awaiting your review." I also would like to choose an email signature from my mail program to use. Third, I would like to include the name of the file that is being sent....
    I found that by doing {content:iteminfo} I could get the file name...If I do {content:"There is a file awaiting your review."} I could get the custom type I wanted....
    BUT, I can't figure out how to get BOTH of them together in ADDITION to adding a custom email signature...
    I know there are some really smart people out there...Any tips?

    I can't figure out how to get BOTH of them together
    This is just standard AppleScript text concatenation with the &:
    ... {content: "There is a file awaiting your review: " & iteminfo}
    Here you can see I'm concatenating a literal string (enclosed in quotes) and a variable. You can extend this ad infinitum.
    As for the signature:
    tell theMessage to set message signature to signature "My Sig"
    (which assumes you have a signature named 'My Sig'. Adjust as necessary.

Maybe you are looking for

  • Confirmation of Production order with out goods issue

    Dear All In one of the post the solution is given as below. "<b>Try using user exit "EXIT_SAPLCORF_102" to check goods issue at the time of confirmation using CO11N.</b>" But .. 1. How and where to find this user exit 2. What code to add inside this

  • Out of HEAP vs. out of NATIVE memory

    I'm working on a document to help our support team classify our customers' out-of-memory errors and know whether it is due to HEAP or NATIVE MEMORY. I've pulled some errors we've seen in domain logs from customers and tried to classify them. Can some

  • Too Many Parameters

    Hi, I have a few methods which have quite a few parameters - in some cases about 10 or 11. None of these methods are similar in so much as to warrant a bean object being passed, but is there another alternative? Any ideas?

  • Mail output for Invoice Verification

    Hi All, I am SD consultant and got requirment to work on related to MM. searched a lot but not able to get answer to my querry looking for. The requirment is to send Invoice to vendor by e-mail message. as soon as we save the invoice for vendor (MIRO

  • "not enough disk space", but I have 60 gigs

    So i'm trying to import this 2 hour vid, and it's telling me I dont have enough disk space. But I have 60 gigs on the drive i'm drawing the video from! I look in prefs and it doesn't have an option to select a hard drive, is it selecting it automatic