I am unable to unstack images with my Elements 11 as the stack option is not active.
I cannot detach images from stacks with my Elements 11. The stack option under the Edit mode is not active even after I have selected the image I want to detach from the stack that I want to email. Instead I end up with all the images in the stack being moved.
I would greatly appreciate any help you can give me in this area.
Thanks,
Dwight
Press Ctrl+D/Cmd+D to get back to the old Detail View. Stacks and versions aren't in the new Adaptive Grid view that shows the thumbnails edge to edge.
Similar Messages
-
Unable to publish projects with inserted video - error message The Flash video can not be loaded
I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings? -
We are trying to 'reconnect' files. we seem incapable to do so, for some reason. Try as we might, we aren't able to do it. can anyone help?
Please see other thread
Re: We are trying to transfer files from PS Elements 13 to our web builder. We are getting a '?' in the top left hand corners of some of the image boxes. It seems that we are unable to transfer images with this ? on the image. We have spent a long time -
I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :) -
I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node. It is set up to prefer secondary,
with the highest priority given to AC node.
I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule. His scripts already consider AlwaysOn, and although the job is set-up on all
3 nodes, only ever runs on AC node.
The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
Date and time: 2014-06-08 09:36:11
Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
Msg 35250, Level 16, State 11, Server AC, Line 1
The connection to the primary replica is not active. The command cannot be processed.
Msg 3013, Level 16, State 1, Server AC, Line 1
BACKUP LOG is terminating abnormally.
Outcome: Failed
Duration: 00:01:00
The other 12 databases continued to backup successfully.
Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
However, monitoring software (Idera SQLdm) showed blocked sessions on P node. When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
Since both processes were background processes, I was unable to kill either process. I temporarily disabled the transaction log backup job, but the blocked process was still active.
I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors. However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back. This also had the effect of releasing
the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
I tried to restart SQL Server Agent on AC node, which did not immediately seem to work. However, after a few minutes, I noticed that the block had disappeared. I re-enabled the transaction log backup job on AC and it started working normally
again. The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
Any help would be greatly appreciated.
DianeAnd here is part 2 of the stored procedure:
--// Execute backup commands //--
WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
BEGIN
SELECT TOP 1 @CurrentDBID = ID,
@CurrentDatabaseName = DatabaseName,
@CurrentDatabaseNameFS = DatabaseNameFS,
@CurrentDatabaseType = DatabaseType
FROM @tmpDatabases
WHERE Selected = 1
AND Completed = 0
ORDER BY ID ASC
SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
BEGIN
SET @CurrentIsDatabaseAccessible = 1
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
FROM sys.master_files
WHERE database_id = @CurrentDatabaseID
AND [type] = 0
AND [file_id] = 1
-- Workaround for a bug in SQL Server 2005
IF @Version >= 9 AND @Version < 10
AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
BEGIN
SET @CurrentDifferentialBaseLSN = NULL
END
SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
FROM msdb.dbo.backupset
WHERE database_name = @CurrentDatabaseName
AND [type] = 'D'
AND checkpoint_lsn = @CurrentDifferentialBaseLSN
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
SELECT @CurrentLogLSN = last_log_backup_lsn
FROM sys.database_recovery_status
WHERE database_id = @CurrentDatabaseID
END
SET @CurrentBackupType = @BackupType
IF @ChangeBackupType = 'Y'
BEGIN
IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'DIFF'
END
IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'FULL'
END
END
IF @CurrentBackupType = 'LOG'
BEGIN
SELECT @CurrentLatestBackup = MAX(backup_finish_date)
FROM msdb.dbo.backupset
WHERE [type] IN('D','I')
AND is_damaged = 0
AND database_name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL
BEGIN
SELECT @CurrentAvailabilityGroup = availability_groups.name,
@CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
FROM sys.databases databases
INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
WHERE databases.name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
BEGIN
SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
END
SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
FROM sys.database_mirroring
WHERE database_id = @CurrentDatabaseID
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'PRIMARY'
END
ELSE
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'SECONDARY'
END
-- Set database message
SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
BEGIN
-- Set variables
SET @CurrentDate = GETDATE()
IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
BEGIN
SET @CurrentCleanupDate = NULL
END
ELSE
IF @CurrentBackupType = 'LOG'
BEGIN
SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
END
ELSE
BEGIN
SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
END
SELECT @CurrentFileExtension = CASE
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
END
INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
FROM @Directories
ORDER BY ID ASC
SET @CurrentFileNumber = 0
SET @CurrentMirrorFilePath = NULL
WHILE @CurrentFileNumber < @NumberOfFiles
BEGIN
SET @CurrentFileNumber = @CurrentFileNumber + 1
SELECT @CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
END
INSERT INTO @CurrentFiles (CurrentFilePath)
SELECT @CurrentFilePath
SET @CurrentDirectoryPath = NULL
SET @CurrentFilePath = NULL
END
-- Create directory
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CreateCompleted = 0
ORDER BY ID ASC
SET @CurrentCommandType01 = 'xp_create_subdir'
SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
UPDATE @CurrentDirectories
SET CreateCompleted = 1,
CreateOutput = @CurrentCommandOutput01
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand01 = NULL
SET @CurrentCommandOutput01 = NULL
SET @CurrentCommandType01 = NULL
END
-- Perform a backup
IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
END
SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
SET @CurrentCommand02 = @CurrentCommand02 + ''''
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
WHEN @EncryptionType = 'RC2-40' THEN '0'
WHEN @EncryptionType = 'RC2-56' THEN '1'
WHEN @EncryptionType = 'RC2-112' THEN '2'
WHEN @EncryptionType = 'RC2-128' THEN '3'
WHEN @EncryptionType = '3DES-168' THEN '4'
WHEN @EncryptionType = 'RC4-128' THEN '5'
WHEN @EncryptionType = 'AES-128' THEN '6'
WHEN @EncryptionType = 'AES-192' THEN '7'
WHEN @EncryptionType = 'AES-256' THEN '8'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType02 = 'sqlbackup'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
WHEN @EncryptionType = 'AES-128' THEN '128'
WHEN @EncryptionType = 'AES-256' THEN '256'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType02 = 'BACKUP_DATABASE'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType02 = 'xp_ss_backup'
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
WHEN @EncryptionType = 'AES-128' THEN 'AES128'
WHEN @EncryptionType = 'AES-256' THEN 'AES256'
END + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
END
-- Verify the backup
IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType03 = 'xp_restore_verifyonly'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
SET @CurrentCommand03 = @CurrentCommand03 + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType03 = 'sqlbackup'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType03 = 'xp_ss_verify'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
END
-- Delete old backup files
IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
BEGIN
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CleanupCompleted = 0
ORDER BY ID ASC
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType04 = 'xp_slssqlmaint'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType04 = 'sqbutility'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType04 = 'xp_ss_delete'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
UPDATE @CurrentDirectories
SET CleanupCompleted = 1,
CleanupOutput = @CurrentCommandOutput04
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand04 = NULL
SET @CurrentCommandOutput04 = NULL
SET @CurrentCommandType04 = NULL
END
END
END
-- Update that the database is completed
UPDATE @tmpDatabases
SET Completed = 1
WHERE Selected = 1
AND Completed = 0
AND ID = @CurrentDBID
-- Clear variables
SET @CurrentDBID = NULL
SET @CurrentDatabaseID = NULL
SET @CurrentDatabaseName = NULL
SET @CurrentBackupType = NULL
SET @CurrentFileExtension = NULL
SET @CurrentFileNumber = NULL
SET @CurrentDifferentialBaseLSN = NULL
SET @CurrentDifferentialBaseIsSnapshot = NULL
SET @CurrentLogLSN = NULL
SET @CurrentLatestBackup = NULL
SET @CurrentDatabaseNameFS = NULL
SET @CurrentDatabaseType = NULL
SET @CurrentDate = NULL
SET @CurrentCleanupDate = NULL
SET @CurrentIsDatabaseAccessible = NULL
SET @CurrentAvailabilityGroup = NULL
SET @CurrentAvailabilityGroupRole = NULL
SET @CurrentIsPreferredBackupReplica = NULL
SET @CurrentDatabaseMirroringRole = NULL
SET @CurrentLogShippingRole = NULL
SET @CurrentCommand02 = NULL
SET @CurrentCommand03 = NULL
SET @CurrentCommandOutput02 = NULL
SET @CurrentCommandOutput03 = NULL
SET @CurrentCommandType02 = NULL
SET @CurrentCommandType03 = NULL
DELETE FROM @CurrentDirectories
DELETE FROM @CurrentFiles
END
--// Log completing information //--
Logging:
SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
SET @EndMessage = REPLACE(@EndMessage,'%','%%')
RAISERROR(@EndMessage,10,1) WITH NOWAIT
IF @ReturnCode <> 0
BEGIN
RETURN @ReturnCode
END
END
GO
ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
GO
Diane -
My G4 powerbook running OSX 10.3.9 starts up with a black screen. The reset button is not working. Does anyone know which keys to press on restart please.?
Try holding the shift key while booting to get Safe mode if possible.
See links for more info.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455 -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
Kind regards,
Faroek Abdoelrahman
The NetehrlandsEmpty the Safari cache more often.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari to test. -
Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my queryYou need to activate Photoshop.
Mylenium -
When i plug in my ipad to charge its just coming up with a red bar in the recharge icon and not charging.... what does this mean and how can it be fixed... checked all cables, not broken
First make sure you are using the charger that came with the iPad and plug that into a good wall outlet. When the iPad battery is completely drained it may take some time on the charger before the iPad responds. Be patient and let the iPad remain on the charger for at least an hour then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?
Urban baul for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
Safari browser connect me with the page I want, but the page itself is not active - how to unblock it?
Try any or all of these standard fixes.
Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit Safari. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me
if you are signed in to iTunes with your AppleID, click on the AppleID > view account > payment information > enter in your information
-
I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?
I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.
Maybe you are looking for
-
Query not running in report builder 3.0
hi, i can run my query in mgmt studio (version 2008R2) and within the query designer of report builder 3.0 but it will not run from report builder. i get a generic error message of "an error has occurred during report processing. (rsProcessingAborted
-
XML parsers with JDK1.5
Does anyone know if the xml parsers that are shipped with JDK1.5 conform to DOM level2 or DOM level3 specification? I am not sure how to locate the parser that is shipped with the JDK either!
-
Problems appending to a Generic Extractor
I have a Generic Extractor which is built on a customer defined table. I have tried to append a ZZ field to the Extract structure but the Append button is greyed out. I therefore directly added the ZZ field into the structure and wrote the logic in
-
Systems level programming in Java
Sometimes I heard people saying systems level programming in Java. And I have seen some job posting also say that. Systems level programming usually are done in C/C++. Can Java do that? Any examples? please advise. thanks!!
-
I changed my password and lost all my contacts
I had to change my account password and I lost all my contacts and my imessage stopped working. How do I get this to work again? Yes I have done a sync, it didn't work.