I am unable to view the CAPTCHA on certain sites, anyone know why?

When a page asks me to fill in the CAPTCHA the box is blank. I was told it was the internet browser causing it.
I also have a problem with some pages loading - and then they are just blank and say "done" at the bottom of the page. I ran a virus/malware check and nothing was wrong.

The 1st Gen ATV will play SD or 720p HD. It will not sync or play 1080p HD. If you download HD directly on the ATV it will pick the right files. If you download through iTunes on your computer, you need to set iTunes to download the "Preferred Video" that will work for your model.
I just went thru this myself. I had reset my ATV and iTunes got set to download HD at 1080p, so my shows would not sync to the 1st Gen ATV. I reset my iTunes download preference for 720p HD and re-downloaded the HD shows. Now they all sync/play on the ATV.
If you have a 1st Gen and a newer ATV on the same network, you should be able to set iTunes to download 720p HD and sync/play on both.

Similar Messages

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT204032 I purchased my Macbook Pro in November 2011 and just installed mountain lion but do not have the power nap option.. anyone know why?

I purchased my Macbook Pro in November 2011 and just installed mountain lion but do not have the power nap option.. anyone know why?

It is for the MacBook with built in flash storage.
http://www.apple.com/osx/whats-new/features.html#powernap
4. Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update.

When I upload a single file into a production in FCS I can access all the fields in the metadata set, when I upload a batch of files, I can only access a partial number of fields in the metadata set. Does anyone know why this happens?

When I upload a single file into a production in FCS, I can access all the fields in a metadata set. When I upload a batch of files into the same production in FCS, I can all access part of the fields in the metadata set. Does anyone know why this happens?

dredcomm,
Great answer, and it led me to where to solve the problem. In the field definition screen there is a category drop down list. If you choose something other than none from the category drop down list then that field won't appear in the list of fields when you attempt to batch import a group of files.
Thanks,
Dave

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

My friend and I share an iCal calendar through iCloud. Until recently, we would receive email notifications if either of us made changes to or added an event to the iCal calendar. Does anyone know why those email notifications stopped?

My friend and I share an iCal calendar through iCloud. Until recently, we received email notificiations anytime either of us made changes to exisiting calendar events or added new items to the calendar. Does anyone know why these email notificiations stopped?

iCloud was experiencing problems with this a couple of days ago, where many users with shared calendars were getting email notifications even though their iCloud settings did not select to receive them. Perhaps when they fixed this problem it reverted your settings to not receive email notifications. Got to iCloud and check your setting for this. If it still look correct, try turning off email notifications, save the change, then turn them back on again and save the change again.

My new version of Pages crashes any time I ask him to Print, other programmes print from the same computer. Does anyone know why this might be?

Last week I installed Mavericks and I cannot print with the new version of pages anymore.
Every time I click on print and/or I press ctl +p the programme crashes and it allegedly reports Apple about my problem, but nothing happens.
Could anyonw help me please?

Have you tried using the PAges '09 that should still be in your Applications/iWork folder?
Peter

I want to use Panopto software on my iMac. It works on the PCs at the office, but when I try to open it on my iMac it only opens the video and audio, it will not open the powerpoint presentations. Does anyone know why this is happening? Thanks.

Why won't the PPt show when I am trying to record and video tape a PPt presentation on Panopto?

Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example.

When I sync my ipod touch or iphone 4s the final step in the process never finishes. Anyone know why? I already unistalled and re-installed itunes.

When I sync my Itouch 5 or Iphone 4s the changes do not apply and the itunes gets stuck in a loop. Any ideas? Already re-installed Itunes.

What itunes is asking is would you like to import the files and settings of your ipod to your iphone? It'll import things like contacts, calendar, mail, apps with app data. If you want your phone set up just like your ipod then use that option. Otherwise pick "set up as a new device" and it'll allow you to keep the two seperate and you will be able to sync them both to your itunes independently of each other.

I've been recieving text messages on my Iphone 4s, but the phone number is not showing up on my bill under the message logs. Anyone know why??

I've been receiving text messages on my phone, but for some reason the phone number is not showing up on my bill under the message log. Does anyone know why?

donnagman,
Thanks for the details. All numbers should show up in the message history log, unless you are communicating via iMessage. When texting the numbers that are missing in the message log are you using your normal messaging app on the device or a downloaded app? Have the numbers that are missing been shown in your message log before?
LindseyT_VZW
Follow us on Twitter @VZWSupport

On my iPad home screen, the mail app used to indicate the number of new emails I had with a number in a red circle. This has vanished since I upgraded. Does anyone know why, and how to restore this?

On my IPad 2 home screen, the mail app used to indicate the number of new messages with a number in a red circle, next to the app. This has vanished, I think about the same time as when I upgraded to the new OS. Does anyone know why and how to restore this feature?

Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response!

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

Unable to view the output of a concurrent program

Dear Members,
I am using Oracle R12.1.3 Vision Instance.
I have run the Create Accounting program. When I click on the view output button, the browser gets displayed and also gets closed immediately. I am unable to view the output.
Can any one please help me in resolving this issue?
Many thanks in advance.
Regards.

Dear Members,
I am facing the above problem in IE.
When I tried in Mozilla, I can view the outputs without any issues.
Can any one suggest me why I am not able to view the output in the IE?
Regards.

Unable to view the Calendar Year/Month in the Query

Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJ

hi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks

I am unable to view the CAPTCHA on certain sites, anyone know why?

Similar Messages

Maybe you are looking for