I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.

The steps are the same whether you have already upgraded or are about to.

Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, do not
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Similar Messages

When attempting to send e-mail photos on my i-Photo 11, I keep getting " THE EMAIL SERVER DIDN'T RECOGNIZE YOUR USERNAME/PASSWORD COMBINATION" even if I already have this in my preference accounts.

When attempting to send email photos on my iPhoto 11, I keep getting the message " THE EMAIL SERVER DIDN'T RECOGNIZE YOUR USERNAME/PASSWORD COMBINATION". However, I already have this info in my preferences/account section. What is the problem and
how can it be fixed???

The usual fix: Delete the account from your Preferences and Re-Enter it.

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Excel 2007 to Sql server table. Column with more than 255 characters.

Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!

Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

How to get a DDE advise link working on a DDE server with more than one topic on the same service, and with an equal item name?

When I create a DDE server with serveral topics, all on the same service and with the same item name (different topic), it appears that an advise link does not function properly. It doesn't work at all, it update only when the advise link is terminated or only one of the topics can use an advise link.
eg.
On one DDE server I have 2 topics:
topic1:
servicename: DDEserver
topicname : C(1)
itemnames : P(1), P(2), P(3)
topic2:
servicename: DDEserver
topicname : C(2)
itemnames : P(1), P(2), P(3)
Only the topicnames differ!
Now I can't get an advise link working on one of the items (sometimes on one, but not
on another).
Normal (non-advise) links are working fine however.
(In my case there is no other solution since this DDEserver should be compatible with an older one, created earlier.)

I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

Report with more than 600 kb image - BO Server getting Out Of memory Error

Hi,
   We have a report which displays images and size is above 600 KB.We are getting an "Out Of memory" Error while previewing this report in Business Object Server.
In another situation we tried by giving a dynamic path to the OLE object, but the report is not showing error. We are not able to view the image whose size is more than 600KB
Notes: 1. Image is stored as a BLOB in Oracle Database
           2. Connection used inside the report is OLEDB
           3. UNIX Environment
Regards,
Sathish

Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line.

SBO calendar with more than 7 users

Hello!
Our customers like SBO calendar functionality, especially possibility of planning activities for other employees. But the very big problem is that there is only 7 users can be shown in calendar view by day.
Question: how to show more than 7 users in SBO calendar.

Vadim,
seems you are requesting a new (expanded) functionality. You should refer to note [1028874|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=1028874]. As this is a non-legal request post it at /community [original link is broken]
-> You may post new thread by applying 'Post New Thread' option; however, please also check for existing threads and reply to any relevant existing one if applicable instead of creating a new thread.
Regards
Mario

Oracle report is not running on application server with more than 700 recod

Hi,
I have developed oracle report using dev suite report builder. When I am running using report builder then its running fine. Whenever I am deploying on application server and trying to run then its not executing. Then I have deployed same report with less than 700 records then its run fine.
Please advice me if you have any solution
thanks in advance
umesh

Hi Pavan,
Thanks for reply.
I have resolved this issue. This issue happen because of report server not able to handle large data. To resolve this issue I have made report server traces service off. Because of making traces off the report server fully utilized for report generation.
Thanks,
Umesh

Why am i getting an upgrade message on my opening page when I already have and I am running the latest version?

You're not on the latest version of Firefox. Upgrade today to get the best of the Web!
I am using the latest version. why is this message still on my opening page. maybe one out of ten times it is not there

The old Google homepage, http://www.google.com/firefox , is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox. It appears that it is no longer being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''''about:home'''''. It looks similar to the old Start Page, but it isn't exactly the same.
See --> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
* Try using the "Restore to Default" button as shown in the above article.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Overlay calendar with more than 9 colors possible?

Hello,
I found in this forum a solution to customize the colors in the calendar overlay, but I have more than 9 calendars and looking for more colors. It this possible?

Yes, you can. Check this for more details
http://davidlozzi.com/2012/06/20/customize-the-sharepoint-calendar-colors/
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Requirement to enable more than two concurrent RDP sessions on multiple Windows Server 2012

I have an existing Remote desktop licensing server, which has users CALs for server 2008. Now I have some windows server 2012 R2, where more than 2 concurrent RDP connections are required.
What I understand that I will need to install RDS server roes on all my Widows Server 2012 and I will need to have at least one RD licensing server to install RDS CALS, that’s all.
If it is correct, the questions is : Can I use my existing license server to add my newly purchased version 2012 RDS user CALs or I will need a new licensing server?
If it is not correct, then what else I need
I appreciate your detail step by step
Thanks

Thanks the for steps, provided,
So in short,
I will need a Windows 2012 Server to install RSD 2012 licencing server to setup my newly purchased X number of RDS 2012 user CALs.
As I just want more than 2 concurrent RDP connection to happen on some Windows 2012 server, I will require to select “Role-Based or feature-based installation and ONLY will enable Remote Desktop Licensing Role and Demote Desktop Session
Host.
I will need to add RD Licencing and add the server 2012 servers; I want more than 2 concurrent connections to happen.
I will need to enable RD Licensing mode as per user
Question:
1. What I need to enable on those servers, where I want concurrent RPD connection to happen
2. In which stage and where I will enable my users CALs, I purchased?
3. Do I have to install RD Session Host role service on the servers, where more than two RPD users will connect at the same time?
I am also in dark, how my user will connect those servers, with RDP connection or with RD Web Access.
All I want to do is to enable more then 2 concurrent connection to some Windows Server 2012 R2. I have already purchased some RDS 2012 R2 Users CAL

How to create more than one connections between my host and server

Hi,
I want to create multiple connections(at least, two connections) between my host and the server.
And use them to transfer data at the same time.
Could you help me, and could you give me a sample code example?
^-^
Thank you very much

import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.net.*;
import java.io.*;
import java.nio.channels.*;
import javax.swing.*;
   This program shows how to interrupt a socket channel.
public class InterruptibleSocketTest
   public static void main(String[] args)
      JFrame frame = new InterruptibleSocketFrame();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.setVisible(true);
class InterruptibleSocketFrame extends JFrame
   public InterruptibleSocketFrame()
      setSize(WIDTH, HEIGHT);
      setTitle("InterruptibleSocketTest");
      JPanel northPanel = new JPanel();
      add(northPanel, BorderLayout.NORTH);
      messages = new JTextArea();
      add(new JScrollPane(messages));
      busyBox = new JCheckBox("Busy");
      northPanel.add(busyBox);
      startButton = new JButton("Start");
      northPanel.add(startButton);
      startButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
//               startButton.setEnabled(false);
               cancelButton.setEnabled(true);
               connectThread = new Thread(new
                  Runnable()
                     public void run()
                        connect();
               connectThread.start();
      cancelButton = new JButton("Cancel");
      cancelButton.setEnabled(false);
      northPanel.add(cancelButton);
      cancelButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
               connectThread.interrupt();
               startButton.setEnabled(true);
               cancelButton.setEnabled(false);
        new Thread(new TestServer(Port)).start();
      Connects to the test server.
   public void connect()
       new Thread(new Client(Port)).start();
//       Port++;
   class Client implements Runnable{
           Client(int port){
               this.port = port;
           private Scanner in;
       private int port;
        public void run() {
                try
                   SocketChannel channel = SocketChannel.open(new InetSocketAddress("localhost", port));
                   try
                      in = new Scanner(channel);
                      while (true)
                           try{
                              if (in.hasNextLine())
                                 String line = in.nextLine();
                                 System.out.println(line + " " + channel);
     //                            messages.append(line);
     //                            messages.append("\n");
                              else Thread.sleep(100);
                           }catch(Exception e){
                                e.printStackTrace();
                   }finally
                        messages.append("Socket closed\n" + channel);
                      channel.close();
                catch (IOException e)
                   messages.append("\nInterruptibleSocketTest.connect: " + e);
      A multithreaded server that listens to port 8189 and sends random numbers to the client.
   class TestServer implements Runnable
          ServerSocket s;
          private int port;
          TestServer(int port){
              this.port = port;
              try {
               s = new ServerSocket(port);
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
      public void run()
         try
            int i = 1;
            while (true)
               Socket incoming = s.accept();
               Runnable r = new RandomNumberHandler(incoming);
               Thread t = new Thread(r);
               t.start();
         catch (IOException e)
            messages.append("\nTestServer.run: " + e);
      This class handles the client input for one server socket connection.
   class RandomNumberHandler implements Runnable
         Constructs a handler.
         @param i the incoming socket
      public RandomNumberHandler(Socket i)
         incoming = i;
      public void run()
         try
              int i = 0;
            OutputStream outStream = incoming.getOutputStream();
            PrintWriter out = new PrintWriter(outStream, true /* autoFlush */);
            while (true)
               out.println(i);
               i++;
               Thread.sleep(100);
         catch (IOException e)
            messages.append("\nRandomNumberHandler.run: " + e);
         catch (InterruptedException e)
            messages.append("\nRandomNumberHandler.run: " + e);
      private Socket incoming;
   private JButton startButton;
   private JButton cancelButton;
   private JCheckBox busyBox;
   private JTextArea messages;
   private TestServer server;
   private Thread connectThread;
   public static final int WIDTH = 300;
   public static final int HEIGHT = 300;
   public static int Port = 8848;

How to allow more than two users on remote desktop on windows server 2012 foundation?

i have a dell server power edge T300 with windows server 2012 foundation. I am unable to connect more than two remote desktop at once.

Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Mavericks Server Calendar and Contacts services won't start.

Recently the calendar and contacts services stopped working. Client computers started getting errors like this:
"The server responded with an error https://[some UID and a lot of other info]... is not a location that supports this request."
It was suggested by Apple tech support to do a free install/rebuild, but that's not really an option simply because of the wiki. I've previously spent months trying to migrate wikis from Mountain Lion Server to Mavericks server; never coming across a working solution and ending up having to copy/paste every page from the old server to the new server. Apple had no working solution for migration wikis and instead suggested a reference to a Krypted site URL (which also didn't work).
Other services are working just fine, but here are the symptoms we're experiencing:
Calendar service has reported a code 0 at one point, but did not continue the error
Calendar service has reported a code -1 at one point, but did not continue the error
Calendar service in can be toggled on, but the service never starts and stays offline even though the toggle switch is "on".
Calendar service full status in Terminal.app is stuck in starting
Calendar and Contacts services seem to take a while to load the status pane in Server.app
Client computers get repeated, non-stop, connection error dialogue boxes in Calendar.app
Occasionally when I try to see the Contacts service status by select it, I get "A networking error occurred while trying to communicate with the server" - this is using Server.app on the server itself, not from a client computer.
It seems the two primary problems are starting the services and therefore connecting to them. Other services such as wiki and filesharing are working fine.
Any ideas folks?
BTW - my Time Machine backup did nothing to help the situation.

Logs?

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

Similar Messages

Maybe you are looking for