I am using a samsung netbook, can do print test but cannot print a file

i am setting up a new hp deskjet 3050 with my samsung netbook using windows 7 starter, i can do print test but cannot print anything else. how do we fix it? thank you

Hi,
If you use your netbook to print through the Wireless, be aware that Windows 7 Started eddition only support printing through a direct USB connection, network communication with the printer is not supported by the OS:
IMPORTANT NOTES
For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition
• Is supported for USB only
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109394-2&cc=us&dlc=en&lc=en...
If it is connected through the network, plug a USB between the laptop and the printer, then try printing and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

I can receive MMS messages but cannot open the file sent...

I can receive MMS messages but cannot open the file sent. It is just blank. Please help. Thank you.

Hi there!
Are you positive that the attached file is compatible with your device? See this KB for information:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB05482&sliceId=1&docTy...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can scan to email but cannot scan to computer using 6830 and OS Yosemite

I just purchased 6830 to use with my imac with Yosemite. I am able to scan to email but I am not able to scan to computer. I have installed the latest driver . I followed directions to access HP utility and there was no way to get to scan preferences. Any ideas how to scan to computer. I keep getting message to open up the utility which does not get may anywhere.

Hi @pfgoodman1,
Welcome to the HP Forums!
I understand that you can scan to email but cannot scan to computer using your HP Officejet 6830 and OS Yosemite. I am sorry to hear this but I am happy to help!
First, I would make sure that the full feature software and driver is installed and not just the basic software.
Then I would recommend the following guides:
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Memory Device) for HP Offic.... (Select Scanning a photo (.jpeg) or document (.pdf) to the computer.)
A 'No Computer Found' Message Displays for HP Officejet 6810 and HP Officejet Pro 6830 e-All-in-One ....
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT5527 I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free stor

I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free storage!

We are sorry to have lost you as a valued customer ndl9! I'm sorry to hear of the difficulties you are having with trying to pay your final bill. Our best recommendation is the pay my bill link, which should allow you access based on your former phone number or account number. Did you try both? As an additional option, you can reach our automated system from an alternate line by dialing 800-922-0204 and then entering your former wireless number. http://vz.to/1fdEQVi
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

I have used Firefox for many years. Now I can receive E-mail but cannot send it from Firefox. Just re-installed Mozilla and still cann't send E-mail.....

I cannot send mail from Firefox. Can receive E-mail but cannot send it. This worked OK until today. I have had firefox for many years. Just reinstalled Mozilla and still cannot send E-mail from firefox.
I use comcast.net for E-mail,using Mozilla to get there.

If your Office email account's SMTP authenticated?
Any error message provided and if so, what?
Are you also accessing an email account and SMTP server provided by SBCGlobal.net with either email client and if so, are you able to send messages with this account and SMTP server when connected to the internet via SBCGlobal.net at home?
And let me get this straight - both email clients work fine without any problems sending messages with your Office email account and SMTP server when connected to the internet at a friend's house that uses another ISP besides SBCGlobal.net but this is an Apple problem?
If an Apple problem, then you'd have problems sending messages with this account and SMTP server regardless whose network and ISP you are connected to.
Regardless what this more than likely under-trained or just unaware person at SBCGlobal.net told you, all ISPs have restrictions on using an SMTP server that is outside of their network or that isn't provided by the ISP used for connecting to the internet.
Some ISPs allow the use of an authenticated server only that is outside of their network but some block its use regardless.
Within the last year or so, SBCGlobal.net made a drastic change in regards to such restrictions and conveniently neglected to inform their customers beforehand. Those using an SMTP server that was outside of SBCGlobal.net's network regardless if the SMTP server was authenticated were required to "opt out" of Port 25 blocking with SBCGlobal.net in order to use an SMTP server that was outside of their network which was working fine before this change was made.
Have you opted out of Port 25 blocking with SBCGlobal.net?

Using adobe updater i can download PS6 update but it won't install.

Using adobe updater i can download PS6 update but it won't install.

I have just had a good chat with an Adobe live chat person. He has explained to me why I am getting the U44M1P7 error.
I have a perpetual version of CS6 that I bought earlier in the year. The creative cloud update only applies to versions of CS6 that have been downloaded via creative cloud. The error means I am trying to update a version of CS6 (my perpetual copy) that has aleady been updated.
I have version 13.0.4 and the update is 13.1.2. If I want the update I have to uninstall CS6 from my computer (my perpetual version) and download CS6 from creative cloud. Then I will be able to have the updates.
Hope this helps you. I haven't ried it yet but will post my results when I do.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

Hi,
Based on your description, I have done a test and I can’t reproduce your issue.
I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
1. Use SharePoint Designer to open another site and check whether it is successful.
2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
3. Perform the connection procedure under another environment and verify whether the issue is resolved.
If the issue persists, can you provide related screenshots for further troubleshooting?
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Epson Artisan 810 issues - can scan and communicate but not print!

I just purchased a new Macbook Pro (13") - my first ever Mac - and am trying to get it to print with my Epson Artisan 810. Like many others I am having problems but none of the posted solutions work for me.
I installed it fresh initially with the drivers from the Epson website, I selected the Bonjour option, I was even able to download whatever update was out there through the Software Update feature, but still the same issue. The printer scans w/o a problem, it can tell me the ink levels and access the maintenance page w/o problems, but cannot print.
Whenever I print SOME message must make it to the printer because as soon as I hit print the printer starts making noise as if it is going to load paper and print, but then almost immediately it cancels the print. The printer log ALWAYS give the same error no matter what document or program I try to print from:
Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS /rastertoescpll failed
I have tried uninstalling and reinstalling the printer over and over and I keep getting this same error and immediate print job cancellation. What the heck is the problem here?

John, I deleted the printer and deleted those folders and reinstalled the printer using the printer menu. When I tried the apple software update it said my software was up to date and didn't offer an option to get updated print drivers. I tried printing again and the same thing happened.
Syd,
I am trying to print from the Macbook to the Artisan entirely over a wireless network. The Macbook has not been plugged directly into the printer or to the router at any point in this. I did try what you suggested, resetting the printing system, and as earlier it did not offer any software updates when I looked for one. I tried printing again and the same result.
I dug around some more directories and found some more files with the epson name in there and deleted those and then attempted to reinstall using the printer setup page, and then again tried a software update and again it didn't find any new drivers, and of course the same printing error occurred again.
It sure appears that the MacOS is holding onto drivers somewhere that I cannot discover because when I reinstall the printer it takes it all of 3-4 seconds to install, and when I try to do the software update it is not finding any new drivers anywhere.
Syd, I agree that there seems to be something specifically corrupted about the printer driver itself, however, but is there another way to remove drivers?
Should I try uninstalling everything and attempting a USB installation to see if prints that way?

When I log in to my hotmail account on mu apple Ipad, I see inbox only and cannot see the word ''new'' to send emails. So I can read my emails but cannot send. Where is the feature to send emails.

QUESTION : when I log into hotmail on my new ipad, I only see inbox where I retrieve my messages but cannot see the word ''New'' which would
allow me to send emails the way it would be on a desk pc. So I can retrieve my messages but cannot send ???
Thank you in advance for help.

The icon in the upper right of the screen (assuming you are using the Mail app) that looks like a square with a pen is the new message button. Tap that to create a new mail message.

I can access a website and select the 'print' option but the print misses out

I can access a website and select the 'print' option but the print misses out photos that should be included in the print. It happens on more than one website. If I use Explorer it doesn't happen. I guess there must be a setting or something that I have not found? Any help very gratefully received. Than you.

I don't know if this will help, but I found it by accident. When I send Word projects to recipients, it doesn't always read properly depending on their format. If they have a PC It distortes my program, or they may have newer versions of Word. If you have your document showing select 'print' and on my print menu at the bottom left corner it has a button that says 'PDF'. Click on that and it gives you several options for a PDF. What I do if I'm emailing to someone is select the email option then you can always print from the email. Hope that helps.
jr

IPhone can join WRT54GS network, but cannot connect to internet

I've got a WRT54GS v.1.1 router w/latest firmware (4.41.4). My wired and wireless computers (windows XP) can connect just fine and see the internet. My iPhone 3GS can join the network, but cannot see the internet. The phone can join the network, gets a DHCP address/gateway/DNS info just fine. Other machines on the local network can see the phone and vice-versa. However, any time the iPhone tries to reach out to the internet, a message pops up saying "Safari cannot open the page because it is not connected to the internet".
Again, other machines on my network can connect without issue. My iPhone has no trouble connecting to other WiFi networks.
I've tried all different wireless encryption schemes, including no password/encryption, with the same results each time. I've also tried using a static IP address on my phone. No luck. MAC filtering is disabled, as is any other access restrictions.
Finally, I've reset the phone's network settings, reset the router to its factory defaults, and tried everything else I can think of.
I've only seen one similar message one these boards with this problem, but it was never responded to. Anyone seen this before of have other suggestions?
Thanks in advance for any help.
David

Thanks for your response!
IP: 192.168.1.100 (DHCP-assigned)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 66.218.44.5, 66.218.44.90 (the DNS's of my ISP)
Router's (local) IP address is 192.168.1.1
Router's internet-facing address is the one assigned by my ISP via their DHCP
All looks right to me.
-David

I updated to Lion, and all of my events show up, but I cannot "add invitees" to any event. I can accept/reject invites, but cannot create them myself.

Help! updated to Lion, and all of my events show up, but I cannot "add invitees" to any event. I can accept/reject invites, but cannot create them myself.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

USB port on wrt610n i can see the drive but cannot see the content

USB port on wrt610n i can see the drive but cannot see the content
I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
help I am lostwhat should i do

winmaco wrote:
Yes i have it is working on my PC
One thing in setting up the usb I had to use a different password
my router has a password and the only way I could move forward was to use the default admin admin user name and password
I could not use my router user name and password.
The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when.

I am using a samsung netbook, can do print test but cannot print a file

Similar Messages

Maybe you are looking for