I am using Acrobat Reader 11.0.10 . I cant print mixed originals and also I cannot print letter size correctly . printing of first two pages ok but the rest gets cut off at the top
How can I print from MAC with Acrobat Reader. I can't seem to get it to print correctly , first two pages of letter size works ok after the remaining pages get moved up and the printing is cut off.
I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.
Similar Messages
-
When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari. Has anybody else had this problem?
I'm using pure HTML5 for mobile websites although you need to provide an OGG file for Firefox. See the movie page on this site...
http://mobile.ezmacwebdesign.com/
If you don't have an iPhone, grab the browser handle and drag it to the left to reduce the width to see how it responds to mobile devices' fixed width browsers .
This will play in all modern browsers and on mobile devices. You can use QuickTime Pro for the OGG or OGV conversion or get the freeware Miro Video Converter...
http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
If you only want to upload an MP4, you can use a flash fallback player and this will cover Firefox and those geriatrics that still use older versions of Internet Explorer....
http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
If you use any of the four fallback players above, take advantage of the fact that you can add a poster image and stop the video file from preloading. This makes for a faster page download time.
You can also achieve this using HTML5 by adding preload="none" and poster="URL to the poster image" into the code shown on this page...
http://www.iwebformusicians.com/Website-Movie-Video/HTML5-Video.html -
When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything
If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.
-
JPG image shows up fine in layout but a section gets cut off a little at the bottom in exported PDF
I've got a JPG inserted at the top of the page and there are text boxes below it. In the layout everything looks fine, nothing is overlapping or getting cut off. But when I export the image (best quality) as a PDF, a few of the letters in the JPG look cut off at the bottom. The image looks like it's aligned straight so I'm not sure why it's only showing some of the letters in the middle section look like the bottoms have been chopped. Any ideas what the problem is and how to fix it? Thanks!
urghhh not working still. all of my child folders are in the root folder...sorry for the confusion. the only files in the Template folder are the parent templates. i really don't know what's causing this. i've checked my css file..it's properly linked to the main templates. everything appears perfectly in FF so i'm assuming that if it were a general prob, the pages shouldn't have shown in FF at all. the index pages previews fine in IE and the old pages do as well, except for a few distortions bc i've changed the css rules. but now i also realize that the html file from which created the template isn't showing in IE as well but only in FF so the prob might have started from there but why?? i've checked everything...at least so i think.
-
I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?
Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins. -
I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?
As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other ) to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.! You can pay with Cash, Credit or I think with a check but using a check I'd ask the Local store how the policy is on that..
Hope that Helps.! Good luck.. -
Ehy does my connection with the net get cut off
connection to the web gets cut off.
Hello ologail,
I see that you are having problems with internet connection. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link showing how to find that information.
When the connection cuts off do you get any error messages?
How long have you been having the issue?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
TS1424 songs are not complete get cut off at the end
I downloaded this album but some of the songs are not complete they get cut off at the end what can i do?
If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519). See tips on downloading in https://discussions.apple.com/message/19097773
If you cannot download a second time, contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
I recently purchased 3 CD's, some of the songs are cut off in the middle of the songs. Several times ITunes sent me a link to redownload the CD's or certain songs and each time either the same songs or different songs on the CD's would be cut short. What could be causing this?
shameless bump
-
Why does Large text in a Form get cut off at the top when I save it as a PDF
Hi. I've created a form in Acrobat with 2 text fields. I set the size to 40pt and 30pts using Helvetica. When I fill out the form and save-as a PDF the text displays as cut off at the top.
Here's what I've tried so far:
Making the text fields MUCH larger than the font.
Changing fonts. I've tried Helvetica, Verdana, Arial
Selecting Multi-line
Does anyone know how I can keep it from cutting off? The only solution I've been able to find thus far is reducing the font size significantly, which is not an option.
THANKS!I'm using Acrbat Pro version 10.1.4
The text looks perfect in Acrobat. I'm choosing File > Save As from Acrobat and then when I open it with Preview or Reader it cut's off the text.
Thanks for your help. -
Why does the menu get cut off even if the project is widesrcreen?
I made a widescreen project in iMovie, exported it to iDVD, and chose a widescreen theme. It looked fine on my computer but when I burned it and played it on my home DVD player, the words were cut off. I also noticed that when played on some TVs, my movie (although widescreen) played as full screen and therefore, cut off some of the footage. Does anyone know how to fix this?
HOW TO MAINTAIN 16:9 ASPECT FROM IMPORT TO BURN
This is the way I do it. There is no compulsion on you to do it my way, but this works (for me). I started this method before iMovie and iDVD were upgraded to 6.0.3, and because not all elements of the various iDVD themes (particularly the pre-iDVD 6 ones) are consistent in keeping to 16:9 throughout the process.
The widescreen preview works just fine when you check your finished project within iDVD. The problem only happens when you either burn a project or save it to an image.
A bug in iDVD 6, particularly when working with PAL, and which has been reported to Apple, is that the sub-menus in many of the themes (the chapter settings) default to 4:3 aspect, NTSC and mpeg 1, instead of the desired 16:9 in mpeg 2 in PAL. This may be partly a leftover from iDVD 5 or even a newer ‘feature’ of iDVD 6. Either way, it is annoying when it happens, and we must hope Apple cure it in iDVD 7. In the meantime here is my failsafe workaround, which sounds a lot more complicated when reading about it, that it is in practise.
Living in the UK, I use PAL (25 fps). Wherever you see a reference to PAL (25 fps) in the following you may substitute NTSC (30 fps) in the various settings mentioned (if you don’t live in Europe), the basic idea is the same. I still use this method, and take these steps, regardless of whether it is always necessary. Worst case scenario: it would have worked anyway. Best case scenario: it works perfectly where it otherwise wouldn’t!
The object of the exercise is therefore to ‘fix’ all constituent parts of the project (video, titles, theme, effects, even audio!) in the desired 16:9 aspect to avoid producing a DVD where the movie is in 16:9 and the menu is in 4:3 or where other irritating surprises lurk in your project, which you only discover after burning a coaster!
First go to http://www.mydvdedit.com/index.php?lang=english and download myDVDedit. This is shareware although the download is free. Send the guy a few dollars/euros, he deserves it. While you are there, read all about it. Now install it in your Applications Folder. You will need it later.
You have finished your iMovie project with music, transitions and so on, and saved it to you Movies Folder. Before you started the project you naturally set it to DV Widescreen.
Open iDVD. Give the project a name, and save it as Widescreen if it didn’t default to the same aspect as your iMovie project. Now import the iMovie project into iDVD, choose a theme (any theme you like, even if it prefers to stay at 4:3) and save the project. Do what you would normally do to the theme and its drop zones. Save the project.
Now save as Disk Image on your desktop. Leave it there for the moment when it has finished/appeared.
Open your Movies Folder. Create a new folder. Name it PROJECTNAME – TS FILES (where ‘projectname’ is the name of your project!). Close the folder. You can of course call it anything you like, but this aids identification.
Now double-click the disk image on your desktop. It contains two folders: AUDIO_TS (which is empty, but please pretend that it isn’t) and VIDEO_TS. Drag and drop these to the folder you created in your Movies Folder. (This takes a moment).
Click on the AUDIO_TS folder and go to Get Info in the file menu. Right down the bottom is where you have to change the permissions. Under ‘Ownership & Permissions’ change this from Read Only to Read & Write. Click the small triangle next to Details, scroll down and click on ‘Apply to enclosed items’. You will be asked for your root password. Close the get info window, and now click on the VIDEO_TS folder and do the same. Close the Projectname-TS Files folder. You have now allowed yourself to change the properties of the contents of those folders, which leads us to the next all-important step.
Open myDVDedit. Go to File and open the projectname TS Files folder. By all means stare at it shock and awe, but don’t bother finding out what it can do, except for the following:
Top left you fill see a list of files. Lower centre you have a large window. On the vertical menu to the left of that, click te middle one (VTS or VMG).
In the window at the top left, ignore ‘First Play’ (if there was anything to correct in that, myDVDedit will have done so and told you).
Click on VMG Menu en (English). Now the whole thing springs to life.
Set Coding Mode to MPEG-2 (if it isn’t already)
Set Standard to PAL (or NTSC if that is what you want)
Set Aspect to 16:9 (not any of the other options)
Now save the file.
Click on VTS Menu 1 en (English) and repeat as above.
Click on VTS Menu 2 and repeat as above.
You have now permanently ‘fixed’ the entire contents of the TS folder (the disk image) in 16:9 aspect. Close myDVDedit – you won’t need it again until the next project!
If you have Toast 7 Titanium, open it. ‘Select DVD-Video from VIDEO_TS’. Choose Select from the main Toast window and select your projectname-TS Files folder. You are now ready to burn! You can set the burn speed (2x recommended) before the burn commences. Allow Toast to verify the burn before you eject the DVD-R disk.
If you don’t have Toast 7, then I assume you can burn the projectname-TS Files folder (disk image) via Disk Utility. I say ‘assume’ only because I have never tried it that way.
Either way, you now have a DVD which will play as 16:9 widescreen on any TV set, even the old ones where you can’t ask it to letter-box. -
Once I send 1 string, the rest are cut off, any ideas?
Hello everyone.
For some reason when I send my first string through the socket, everything works fine. But after that Its cutting off the first 2 or 3 characters of the string and I have no idea why because I'm flushing the output buffer before and after I send the the string to the output buffer.
note: complete code can be found here:
http://cpp.sourceforge.net/?show=38132
Am I not flushing right?
Here's the code:
public class MultiThreadServer implements Runnable {
//csocket is whatever client is connecting to this server, in this case it will
//be a telnet client sending strings to the server.
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
//setting up sockets
Socket outputServ = null;
//create a message database to store events
MessageDB testDB = new MessageDB();
try {
//setting up channel to recieve events from the omnibus server
BufferedReader in= new BufferedReader(
new InputStreamReader(
csocket.getInputStream()));
PrintWriter out2
= new PrintWriter(
new OutputStreamWriter(
csocket.getOutputStream()));
//This socket will be used to communicate with the z/OS reciever
//we will need a new socket each time because this is a multi-threaded
//server thus, the z/OS reciever (outputServ) will need to be
//multi threaded to handle all the output.
outputServ = new Socket("localhost",1234);
if(outputServ.getLocalSocketAddress() == null)
System.out.println("OutputServer isn't running...");
//Setting up channel to send data to outputserv
PrintWriter out
= new PrintWriter(
new OutputStreamWriter(
outputServ.getOutputStream()));
String input;
//accepting events from omnibus server and storing them
//in a string for later processing.
while ((input = in.readLine()) != null)
//looking to see what telnet gets
out2.println(input);
out2.flush();
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.flush();
System.out.println("Event from: " + csocket.getInetAddress().getHostName()
+"-> "+ input +"\n");
System.out.flush();
//sending events to output server
out.flush();
out.println(input);
out.flush();
//close the connection if the client drops
if(in.read() == -1)
System.out.println("Connection closed by client.");
break;
//cleaning up
in.close();
out.close();
outputServ.close();
csocket.close();
catch (SocketException e )
System.err.println ("Socket error: " + e);
catch(UnknownHostException e)
System.out.println("Unknown host: " + e);
catch (IOException e)
System.out.println("IOException: " + e);
}Here's some example output I'm getting from the telnet screen which is (out2) stream:
This is a test
This is another test
his is another test
This is yet another test
his is yet another test
This is a test worked fine, as you can see, it outputed This is a test when I typed it in.
The next string "This is another test" fails, as you can see its echoing out:
his is another test
I'm also printing out the contents to the console, and i'm getting out the same thing:
Enter port to run server on:
3333
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=3333]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=2184,localport=3333] connected.
hostname: localhost
Ip address: 127.0.0.1:3333
Event from: localhost-> This is a test
Event from: localhost-> his is another test
Event from: localhost-> his is yet another test
Connection closed by client.
ANy help would be great!
Message was edited by:
lokieI posted more compact code so its easier to see and understand: The run() function is where the problem is occurring.
//SAMPLE OUTPUT FROM CONSOLE
Enter port to run server on:
3333
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=3333]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=2750,localport=3333] connected.
hostname: localhost
Ip address: 127.0.0.1:3333
Event from: localhost-> This is a test
Event from: localhost-> his is a test
Event from: localhost-> his is a test
Connection closed by client.
//------END OF SAMPLE OUTPUT-----//
//---THis class is called everytime a new thread is created,
//only 1 thread is created because only 1 client is connecting to the
//server
package server;
//parser server
import java.io.IOException.*;
import java.io.*;
import java.net.*;
import java.util.Scanner;
public class MultiThreadServer implements Runnable {
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
try {
//setting up channel to recieve events from the omnibus server
BufferedReader in= new BufferedReader(new InputStreamReader(csocket.getInputStream()));
String input;
//accepting events from omnibus server and storing them
//in a string for later processing.
while ((input = in.readLine()) != null)
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.println("Event from: " + csocket.getInetAddress().getHostName()
+"-> "+ input +"\n");
System.out.flush();
//close the connection if the client drops
if(in.read() == -1)
System.out.println("Connection closed by client.");
break;
//cleaning up
in.close();
csocket.close();
catch (SocketException e )
System.err.println ("Socket error: " + e);
catch(UnknownHostException e)
System.out.println("Unknown host: " + e);
catch (IOException e)
System.out.println("IOException: " + e);
//This is the main function, the only thing it does is
//create a new thread on each connection.
package server;
//This is the parser Client that will parse messages and send to the
//z/Os output Server
import java.io.*;
import java.net.*;
public class MainTest
public static void main(String args[]) throws Exception
//get console input
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Enter port to run server on: ");
String input = stdin.readLine();
int servPort = Integer.parseInt(input);
//setting up sockets
ServerSocket ssock = null;
Socket sock = null;
try
//setting up server to run on servPort
ssock = new ServerSocket(servPort);
System.out.println("Listening on : " + ssock);
System.out.println("Waiting for client connection...");
while (true) {
//waiting for client to connect to server socket
sock = ssock.accept();
System.out.println(sock + " connected.");
//get host information
InetAddress clientIa = sock.getInetAddress( );
String clientName = clientIa.getHostName();
String clientIp = clientIa.getHostAddress();
int localPort = sock.getLocalPort();
System.out.println("hostname: "+clientName +
'\n' + "Ip address: " + clientIp
+":"+ localPort + "\n\n");
new Thread(new MultiThreadServer(sock)).start();
catch (SocketException e )
System.out.println ("Socket error: " + e);
catch(UnknownHostException e)
System.out.println("Unknown host: " + e);
catch (IOException e)
System.out.println("IOException: " + e);
} -
Tape delay gets cut off in the middle of a project
I'm working on a multichannel 24bit, 48kHz audio project in Soundtrack Pro version 1.1.
I'm using WAVs as source material.
One of the audiotracks contains a short sample of 1 second, that has a Tape Delay effect on it with the feedback on 55%, so it keeps repeating for about a minute. At least, that's what is should do.
The problem is that it gets cut off after around 15 seconds.
This does not happen when I solo the track or some of the tracks.
I've converted the 24bit, 48kHZ source WAVs to 24bit & 16bit AIFFs, but this doesn't make a difference.
I found a work around, by solo exporting & importing the track with the delay on it, but this is not how it should be.
Has anyone had similar problems and maybe found a solution?
Thanks.
G5 Dual 1.8Ghz Mac OS X (10.4.9)For everybody who has the same problem: I found a solution.
Soundtrack appears to end an effect abruptly after around 15 seconds when there are no new clips on the timeline in that track.
The solution is adding 'silent clips' in those tracks every 10 or 15 seconds for as long as the effect has to continue. Not very elegant, but it works. -
I recently updated my iphone 4 with the 6.1 update. Ever since then my iheart radio app has been acting up. While listening words are getting cut off as well the stations just cut off playing. I have tried shutting my phone down and turning it back on but it doesn.t seem to help.
i have same problem in UK - my phone no longer works with my car cable - it will charge the phone, my ipad works fine, as does my old itouch so I know that the cable is ok. It comes up with no connection even though it is charging it. It used to be fine I dont understand why this would happen?
Loppers -
I connected my Macbook Pro 2012 to a 1080p monitor, and the display is cut off at the top?
Hello,
I have just connected my Macbook Pro to a 1080p 23' LG monitor using a Displayport to VGI adapter. However, when I use the 1080p setting, it cuts off a little bit of the top bar. When I switch to lower resolutions, it works just fine. I would rather use it at 1080p, though. Is there a way to fix this?
Thanks,
HiTryxYou may need a display adaptor but can otherwise use a non-Apple monitor.
(109856)
Maybe you are looking for
-
I created a document in Pages on my ipad and now it won't open up. How can I fix this?
I created a document on my Ipad and when I finished it, I closed Pages. When I went to re-open Pages and see the document it wouldn't open. I click on the document and it shows the processing symbol but then the entire program closes. All of the othe
-
Need info before switching to Apple from Windows
I am looking at a laptop and need to run some windows based programs. I understand that Virtual PC is designed for that. However, I have two GPS programs, neither is Apple compatible. I use a Garmin for my motorcycle and Delorme for my laptop in my t
-
I'm using Logic 7.2.3 and everytime I record a file, the fade in field shows an * as opposed to 0. This is on every file no matter if I select in a group or just an individual file. Even entering a number in the field only brings back the * and any c
-
How do I get the activation serial number for
I've downloaded Photoshop CS6 Extended trial version. How do I get the activation serial number for this software
-
MRP list out put tables for header and item -reg
Hi , What is the table to be used for MRP out put header is MDKP for item what is the table ? regards, madhu kiran