I am using Constraint Filtering.. Filtering is not staying

I am using Java Swing Framework in my project and in Constraint Filtering mechanism.
For the Filtering, i need to select from List it will filter on the bottom tables.
But i am getting problem with the filtering ... selection is not staying.
When we select a value from the List,ListSelectionEvent is triggering ..
Can u help me ....in the way when we select a Value from List ...
is there any possibilty to set Intervals in Swing...
What happens is when we select Value from List some times the event is not triggering at all.
Could you please help me....

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Similar Messages

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

How to Increase the retreving size of instances using PAPI filters.

Hi,
How to Increase the retreving size of instances using PAPI filters.
In my engine database instance size exceeds 2500 then we are getting following exception.
If we login in to user workspace able to see the instances but while trying to retrieve from PAPI getting below exception and showing the user's inbox aize as 0.
In Process Admin console we set all the required parameters.
Still I m getting the same problem.
Can you please lgive mev the solution.
<Mar 23, 2010 8:58:24 PM SGT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.getInstancesByFilter(Lfuego.papi.impl.j2ee.EJBSecureEngineInfo;Ljava.lang.String;Lfuego.papi.Filter;)
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl.
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl
     at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2032)
     at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1212)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1953)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
Regards,
Bharath.
Edited by: bg57295 on Mar 24, 2010 6:45 PM

Hi Bharath,
Believe me, you have an incompatibility between different build#.
PAPI has an instance cache. When certain process has more instances than the maximum specified, the cache is switch to status OPEN. That means, that PAPI will not be able to resolve some instance queries using the information in the cache. When that occurs, PAPI forward all those queries to the engine.
The incompatibility introduced is in the communication between PAPI and Engine. So, you only get the exception when you have more instances than the maximum cache size.
Regards,
Ariel

Some filters are not available

All my filters are not available but they used to be. ?

Probably in the wrong bit mode. Look at the tab above your canvas and see what number is in that tab. If it is anything other than 8 bit odds are some filters are not available.

Filtered Photos not showing in Computer

I have updated the iOS 7 on 18th sept, since i have the problem.When im using photo filters its showing the filtered Photos on the phone but after i connect my iPhone 5 to PC i cannot find that photos, insted i can see those photos as Normal Photos.
Please help me to fix this.

My photos were not showing up in the Apple TV menu either. You have to click on the music folder listed under computers. Then you need to choose photos and scroll down to your music folder. There you will find your photos. Kind of lame, but Apple accesses everything through iTunes.
Apple Tech Support walked me through this today.

Lightroom 4 - My Nik filters are not in the Edit version of Elements when I want to edit with cmd+E.

Lightroom 4 - My Nik filters are not in the Edit version of Elements when I want to edit a picture from the Lightroom Bibliotheque with cmd+E, because Ligthtroom use a back up copy of Ellements 11 that is on an extern back up drive (i don't understand how that is possible). My Nik filters are not on that drive but well on my Mac's Hard Disc.
How can I tell to Lightroom to use the Mac's Hard Disc version that is in the Dock ?

Of course my Nik filters are why the Dock version of my Mac.
The question is that I don't know why, Lightroom when I want to edit a picture in Elements (cmd+e), Lightroom start un security copy of Elements that I have put on my extern hard disk and that copy is without the Nik filters.
So how can I tell to Lightroom NOT to use the version of Element that is on extern hard disk but the original version on the hard disk of my Mac in the map Applications ?

Possible to use list filters to filter library?

Hi-
We have a library of documents, and want to add XLS to how it displays for end users. However, doing so means we can't use column header filtering.
so, we tried to use List filters (as ugly as they are), but they will not allow us to connect to the web part showing the documents.
Has anyone been able to use OOB functionality to add one web part (EG, sharepoint list filters) to filter a document library display?
thanks.
Barbara Selden director, Business Readiness 110 Consulting

Hi Barbara,
As I understand, you want to use OOB functionality to add one web part (EG, sharepoint list filters) to filter a document library display.
Could you please provide the screenshot of the SharePoint list filter web part configuration?
You should make sure the SharePoint list filter web part and document library in the same page. When they are in the same page, you could build the connection between them.
Then you could edit the web part to choose the document library in the list section, view and value field. Then create the connection to the document library by clicking connection. You could click the drop-down arrow in the upper-right corner of the SharePoint
list filter Web Part, click Connections, click Get Filter Values From, and then select the custom list.
Then you could enable Server Rendering in the document library web part. You could edit the document library-> Miscellaneous > Enable Server Rendering.
After all you could filter the document library.
The article below is about how to connect a SharePoint List Filter Web Part to a Data View Web Part.
https://support.office.com/en-us/article/Connect-a-Filter-Web-Part-to-a-Data-View-Web-Part-bc10362e-afaa-42dc-b09e-ba8b1b83bb3c?CTT=5&origin=HA010033786&CorrelationId=6ed6821e-b67e-4adf-bd83-6ccc18441ec0&ui=en-US&rs=en-US&ad=US#bms5
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Using servlet filters- to read the rsponse

Hi ,
In my web application i am displaying the final result as an xml in a jsp.Now what ever I am displaying to the user i want to get that as a string and store it in a database.
For this i think i have to get that from the response object, i just looking at the servlet filters , but i am not sure using the servlet filters is a good option or not.
And i am really not sure exactly how to use the filters.
Please somene help me with this , is there a way for this,Please let me know if you don't understand what i am trying to do, so that i explain in little more detail.

Not exact but close. Describes a filter that caches the response to disc:
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html?page=3

Why filters are not awailable for my objects?

Why filters are not awailable for my objects?

Based on your screenshot preview, I can see that from your Elements panel, you are using an external .html file, correct?
Some in-app Properties are not available for external, non-managed files.
If you create a new project (File > New), for example, add an element you will have full access to Edge Animate properties.
If you create a htm5 doc in Dreamweaver, for example, and open that in Edge Animate then you are limited - because the originating file (.html) is from another application.
Hope this helps, clarify.
Darrell

SQL Server Policy Based Management Condition 'conditionname' cannot be used for filtering.

Using SQL Server 2008 R2, I am trying to create a condition to be used as a filter at the database level. So for each database, I would like to test the presence of a Database Extended Property using the following code in the Expression/Field:
ExecuteSql('String', 'SELECT value FROM sys.extended_properties WHERE class_desc = ''Database'' AND name=''somepropertyname''')
I created the condition using the Database Facet.
The condition can be evaluated in a policy, but I cannot use the condition as a filter for a policy against the "Database" filter. If I create a new condition that can be used as a filter and try to edit that condition, I receive the following
error:
"Condition 'conditionname' cannot be used for filtering."
I cannot find any documentation on the limitations of filters. I am assuming that ANY use of ExecuteSql would not be allowed. This filter is important because I am testing the @IsEncrypted of Every StoredProcedure, Every Database. If the
database extended property is present, I want to skip the test.
CorkChop

Hi, you resolved this issue? If yes, how?
[]'s | Rodrigo Ribeiro Gomes | MCTS/MCITP Dev/DBA

Using Photoshop Filters in Premiere

Ok, maybe I'm just stupid, but I've searched all over the place several times and I can't find out how to do this. Seems like it should be obvious and simple. I just want to be able to use the filters from Photoshop (particularly paint daubs) in Premiere. I read in the help file that you could copy filters you wanted to use universally into the Common Plugins folder, but in looking through the Photoshop Plugins folder, I can't find the files/filters I want to copy. I've also looked for Third Party solutions, but everything I've found seems to be much more complex than simple filters. Am I looking to do the impossible?
TIA

there's a long list of video effects that I can apply (including Mosiac, Posterize and Texturize) in Premiere, just not the specific filters that I'm looking for
While the base names sound similar, if you check the file extensions of each, in each program, you'll see a big difference. Now, you could try renaming a copy of a PS Filter from .8BF to .AEX and see what happens. I'd not expect PrPro to even open, so remember where it is, as I'll bet that you will be quickly deleting it.
To get close to what you want, you'll need to get PS Extended and do the work in PS, then Export/Import to PrPro.
Good luck,
Hunt

Using multiple filters

Is it possible to use multiple filters (some of same type)? I want to restrict the SCO content to just courses and curriculums only, how would I do that? When I try to use two filter-type filters, it uses the last one only.

Hello Dear,
I have try with this api/xml?action=sco-expanded-contents&sco-id=#####&filter-type=content&filter-icon=attachm ent&filter- folder-id=######
and this is working for me.
Note:-##### @ here need to add your stuff
Hope this one help to you in further process.
Good luck.

Quartz filters are not working (for PDF)

It seems that quartz filters are not working for me under Mountin Lion. I have tried to export, print, etc everything in Preview, Automator, ColorSync. It simply won't apply the filters to my PDFs.
Anyone experienced similar issues? Is it a known bug?

I kinda have the same problem, except its only my custom filters that aren´t working in ColorSynch. The other filters get applied as usual, but I can not change any of the preformed filters within ColorSynch, and the "live update from filter inspector" doesn´t work if I try to apply changes or use my custom filters.
The custom filters I have, were created prior to my upgrade from snow leopard to moutain lion.
I´ve understood that there has been multiple problems with the filters in lion ++
If there isn´t a quick fix to this, does anybody know of any programs I can use to apply filters without having to buy Adobe Pro, my use is not for simply decreasing file size, but mostly for editing colors prior to prinitng. And its not sufficient to use the preformed filters unfortunately.

I am using Constraint Filtering.. Filtering is not staying

Similar Messages

Maybe you are looking for