I attached the form that I wanted to print, but it also printed my signature pg, how can I prevent?

Used eprint for the 1st time, but don't want my signature page to be printed. I sent the page to be printed from Outlook.
Thank you for the help!

Hi,
Any contene within your email message will be printed, that is the way the ePrint service works, as you may find listed within the limitations part of the FAQ section:
You cannot print email attachments without also printing the email.
(Source: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02649107&lc=en&dlc=en&cc=us&site=null&lang=en&k...)
As a workaround, simply erase the signature along any other content from the mail content before sending the job.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

  • I am trying to trim video in IMovie. I make the section that I want to keep, but then the "Trim to Selection is not highlighted and will not let me select.

    I am trying to trim video in IMovie. I mark the selection that I want to keep, but the option "Trim to Selection" is not highlighted and it will not let me choose it.

    You can only do this with a Project.
    You cannot use this function with an Event.
    Z.

  • I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appea

    I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appearing on my iPhone? Help!

    http://support.apple.com/kb/HT1296

  • Have a new mac andi want reinstall os but i don't have high internet how can reinstall?

    have a new mac andi want reinstall os but i don't have high internet how can reinstall?

    Why do you want to reinstall the OS on a new Mac?  That should not be necessary.  If you tell us what's wrong that is making you want to do that, we can better advise you.
    As to reinstalling the OS, on a Mac with Lion (Mac OS X 10.7.x), you need to either have an internet connection capable of downloading several GB of data or you need to buy the Lion flash drive from the Apple Store.
    To save an installer for future re-use, you could try this:
    Re: Backup disk for OS 10.7 needed

  • I am using windows 8.1. But I recieved the error This apple id is valid but is not an icloud account. How can I get connected to Icloud?

    I am using Windows 8.1. When I try to connect to Icloud I get the Message: This Apple id is valid, but is not an icloud account.
    How can I get connected to Icloud?

    Hello pmarrone,
    You may only sign up for an iCloud account via one of the following systems or devices.
    You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/HT4436
    Cheers,
    Allen

  • Have a jpg picture that I want to print on a cd. Can not find a format for full picture

    Can not find a cd  layout that I can put a full picture that I have on it.  It is in jpg format.  I have a ip2700 printer.

    OK, great!  EasyPhoto-Print EX should have come with your printer. If not you can d/l it from here.
    Here is a screen shot but I sugest you read the manual which you can also d/l from the Canon site.
    Simply click these two places to delete the pre-made layouts.
    Now click here and select the one you want or made previously.  
    Hope this helps you.
    EB
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • HT1937 Hi i have an ipod apple shuffle it was stollen and i recovered it now i cant acces my old music,and all the details that were inside it,these person deleted my stuff and instored his how can i recover my documents please help

    Hi i have an ipod apple shuffle it was stollen and i recovered it now i cant acces my old music,and all the details that were inside it,these person deleted my stuff and installed his please help

    This is an Enterprise iPhone forum.  You will  get more imediate assistance by going to the correct forum.

  • I wish to change the length of time cookies are saved but this option is not highlighted. How can I make this change?

    Under Tools/Options/Privacy, I have selected "accept cookies from sites". The window that enables you to specify the length of time for FIREFOX to save the cookies is not highlighted and is set to have them expire when the session is closed. How can I reset this to have the cookies saved for my next session?

    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/

  • I have an iPad 2 and used old Apple ID for iBook app; now it wants to upgrade but I have a new Apple ID, how can I make certain I don't lose any data in my iBooks?

    I have an iPad 2 and used old Apple ID for iBook app; now it wants to upgrade iBook but it is "stuck" on my old ID, yet I already created a new ID but it won't let me update the App.  I have everything backed up on my MacBook so if I delete iBooks on my iPad and retrieve the App under my new ID and then sync with my MacBook, will I still have all of the books, etc.?

    Your purchases are tied to your Apple ID. If you bought all of the books with the old ID then AFAIK you will have to continue to use that ID in order to continue to sync those books to the iPad.
    You have to update the app with the old ID so I don't see how you could keep the books with the new ID. Maybe I am wrong about this, but someone else will chime in I'm sure and correct me if I am wrong.

  • How can you prevent encrypted folders that you created in disc utility from being deleted?

    How can you prevent encrypted folders that you created in disc utility from being deleted?

    bibst wrote:
    How can you prevent encrypted folders that you created in disc utility
    You cannot create encrypted folders in, or encrypt folders with, Disk Utility.
    You can create with Disk Utility encrypted disk images from folders. I assume that's what you mean.
    The proper way to do it is by setting the immutable bit. Read here
    <http://www.thexlab.com/faqs/immutableflags.html>
    about the immutable bits (and the trouble they sometimes create).
    The user immutable bit (uchg) is the same as the Finder lock, as described above by X423424X. It's a weak lock, with only a warning.
    The system immutable bit (schg) is more powerful. Once is set, the item cannot be deleted in Finder (even though Finder will ask for your password and may give you the impression that it can trash it; it will end with an error).
    I set it in Terminal, thus
    $ sudo chflags schg my_encrypted_disk_image
    and unset it also in Terminal
    $ sudo chflags noschg my_encrypted_disk_image
    (Note that, when you unset the system immutable bit, the change won't be reflected immediately in Finder, but the item can be trashed nevertheless.)

  • I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button.  When the butten is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format.  Is there a quick fix?

    I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button.  When the button is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format.  Is there a quick fix?

    Hi,
    You have the choice between xml or pdf, in later versions of designer you can choose with a dropdown on the email button Object palette, the "Submit As";
    In earlier version you had to edit the XML Source and change the format from xml to pdf (or vice-versa);
    Regards
    Bruce

  • How to Enable a Push Button In The Form That Is Always Greyed Out?

    Greetings All,
    I am trying to enable an existing "Return" Push Button(PB) which is always greyed out whenever the form is called in either an update or review mode. After some research, I found that this PB's functional property is "Enabled" (i.e. the enabled value = 'Yes'), and it is coded programatically set 'Off' in 30 places and 'On' in 2 places in the form that I inherit from my predecessor by using the following code:
    SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN', <XXXXX>);
    Where <XXXXX> could be either TRUE or FALSE. I've been spending a lot of time in trying to enable this "Return" PB (without modifying the existing programming code) by adding the 'SET_ITEM_ON_OR_OFF' built-in command to set the PB on in WHEN-BUTTON-PRESSED TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE Trigger, but all tries in vain. Could you please help me with the following question?
    What is the easiest way to enable a PB that is set programmatically?
    Is there something else I should know to enable a PB, in addition to what I have already mentioned above?
    Thanks in advance,
    Jinlan
    --

    Thanks all for your information and help. I included the following code, as suggested by Manu, in WHEN-MOUSE-DOWN TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE TRIGGER:
    SET_ITEM_PROPERTY ('BLK_UPDATE.PB_RETURN_WORK_REQ', ENABLED, PROPERTY_TRUE);
    and I made sure there was no " SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN_WORK_REQ', FALSE);" statements after the above code, but, the "Return" PB is still in grey; in other words, it is still not accessible when my form is called.
    Perhaps, I need to place the above SET_ITEM_PROPERTY code in a different trigger other than the triggers mentioned above, uh? Any thoughts on this?
    Manu,
    You are absolutely right that the "SET_ITEM_ON_OR_OFF" is an ih-house written procedure which is defined/stored in the Attached Libraries. (I should have checked before making the "built-in" assumption. Thanks for catching and clarifying this.) Please help me with the following questions:
    How do I view the procedure in the Attached Libraries???
    Thanks in advance,
    Jinlan
    --

  • It seems like some of the features that I want to use are not available  in MUSE like in browser editing?

    I decide to use Business Catalyst for hosting because it came with my CC membership, However it seems that some of the main things I wanted to do might not be available or can only be used for additional membership fees.  I wish that this was more clear beforehand!  I am happy with the built in things but I am a little disappointed in finding out some of the features that I wanted to use, such as in browser editing might not even be available at all as long as I use MUSE.  Managing customers using secure zones, and some other page level sign in forms seem to be not available also
    Is this correct, if so what other limits can I expect?

    People do fumble their way through going into the BC developer code editor online to do layouts etc and then to Muse and back but Muse only covers basic modules and templates. Not all the tag's, layouts, tag features and the guts of what being a web developer/designer is.
    So you can go so far, but then you will hit a wall like everyone does with Muse.
    Muse is not designed to do everything out there to make a site, it Cant, those sorts of tools from frontpage to Muse can only take you so far.
    I can not just go build a house with the tools from the big depot. They may all do the job, but I do not have the knowledge or the plans to do so.

  • We have a form that we want to make into a form that can be filled out electronically. Can I do this?

    We have a form that we want to make into a form that can be filled out electronically. Can I do this?

    If you mean a PDF document and want to separate it into several parts, there is no way of doing it with just the free Reader, buy it can be done with Acrobat. If you are talking of another type of document, please post full details.

Maybe you are looking for