I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?
I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?
I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"
Similar Messages
-
I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you
Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.
-
I contacted Netflix. They are unfamiliar with this problem. Anyone have any experience with this problem
I have the same problem. I put a Dexter dvd from Netflix in my Macbook pro 0sx leopard. Nothing happened. Dvd player did not recognize the disk. To check whether the Dexter dvd was damaged, I put the dvd in my PC and it worked without any problems. I then put another dvd disk (Kubrick's Shining) in my Macbook and it worked fine, so there must be something in the Dexter dvd that messes up the Macbook. I've seen other posts specifically citing that the Dexter dvds do not work on the Macbook. This looks to me like a Showtime problem.
-
i can watch you tube fine, but if i try to watch anything else it doesnt work, bbc iplayer, itv player, videos on sky sports
I have exactly the same problem, i rolled back to 3.6.8, bbc iplayer plays fine. Now i have the 3.6.10 update pop up re-appearing, thank you but no thanks.
-
After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?
Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2) -
When using Migration Assistant to transfer files from my pc, I get an error message saying that an attempt was made to access a socket in a way forbidden by its access permissions. How can I fix this?
You followed:
http://www.apple.com/support/switch101/ -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.
This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454 -
Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?
I don't have a solution for you, but just wanted to let you know I used to have the exact same problem. I resolved it (for the most part....about 90% of the time, anyway) by adjusting the screensaver and power settings to never let the computer go to sleep.
-
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?
If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O. -
I want to use my old iphone for my kids as an ipod. How do I keep from getting text messages on it when it is turned on? If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think it's a 4. Thanks
Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
It would depend however on the age of the child.
Good Luck -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I used to have an icon on my menu bar at the top of my screen to help me detect displays (monitors) It has disappeared and I don't know how to get it back. Does anyone know?
Your's may look more like this...
...if you're running Mountain Lion. I'm in clamshell mode right now, so I don't have any mirroring options. AFAIK, there's no more "Show displays in menu bar" in Mountain Lion.
Clinton
Maybe you are looking for
-
How can i change the column label text in a alv table display
how can i change the column label text in a alv table display?? A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution : <i>* declare column, settings, hea
-
CS3 stopped working on two imac's
Hi I really need an Adobe CS3 expert and a Mac expert's help. I have been troubleshooting two days without luck. I have been in the forum trying to solve the mystery shutdown of my CS3 software. I have an imac 2006 with Snow leopard 10.6.8. details:
-
Itunes installer won't run in Windows 7
I am trying to install the latest version of itunes on my new laptop and the installer won't run. It is a samsung sereis 7 notebook running Windows 7. I have downloaded itunes multiple times and tried running as administrator. I do not get any erro
-
TS3988 Trouble with Syncing with iCloud and my Mac (and iPhone)
I have moved my @me.com account to iCloud. Now it doesn't sync with any my devices. I can access iCloud itself and have full view of calendars, etc. They are incorrect as they are not synced with my Mac and doesn't update my iPhone. I have tried to
-
WRT54G Wireless Router Will Not Assign a Network Address
A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned net