I bourght a new ipod touch for my wife, i put my apple id in for her b/c we were not home, how can I clear my

I bought a new ipod touch for my wife, I put my Apple Id in to activate it, b/c we were not home, now that we are home I would like to set up a account (apple) of her own, so that it won't be interfering with my account. thanks for your help.

Why not just erase the iPod and start over, using her Apple ID. Settings > General > Reset > Erase All Content and Settings, then you can start over with the initial setup of the device.
Alternatively, your Apple ID may have been entered in:
Settings > iCloud
Settings > Messages > Send & Receive
Settings > FaceTime
Settings > iTunes & App Stores
Sign out of your ID in these menus and sign in with your wife's Apple ID.

Similar Messages

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • My daughter got a new ipod touch and set it up using my apple id.  It sync'ed and got my contacts, so she went ahead and deleted them off her ipod.  Unfortunately, my iphone then 'synced to the cloud' and I lost all my contacts.

    My daughter got a new ipod touch and set it up using my apple id.  Once she sync'ed it, she had all my contacts, so she went ahead and deleted the ones she didn't want.  Unfortunately, my iphone then sync'ed to the cloud and all my contacts were wiped out (the ones she deleted).
    So, I wiped my iphone and did an icloud backup/restore.  This restored all my apps, but my contacts are still the ones from when my daughter did her update.  It doesn't appear as though I got back my contacts, even though I chose an icloud backup from before the deletion.  Logging into icloud shows the reduced/deleted contacts, not the full list I had, and I can't see a way to revert back to an old copy.
    Any ideas?  I thought restoring from the cloud would have done it, but the contacts I got were the 'current' copy, not an older/archived copy.
    I'd appreciate any ideas.  None of the articles I found seemed to address retrieving an 'old' copy of your contacts from the cloud.

    The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts.  Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
    The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
    Otherwise the deleted contacts are gone.

  • I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?

    I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?
    Thanks

    I tried Notpod but can't get it to work.  Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+).  I also can't do this in Windows Explorer.  Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
    The error mesag I get in Notpod is:
    "Unhandled exception has occurred in your application.  If you click Continue, the application will ignore this error and attempt to continue.  If you click Quit the application will close immediately.
    InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
    Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
    I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
    Thanks anyone who can help

  • New ipod touch cant read wifi

    Just got a new iPod touch for my daughter. Have connected to Wifi as I do via my iPhone but it is unable to read the Wifi connection even though the Wifi symbol is shown.
    My Iphone seems to have a problem too however other devices in the house can connect no problem to the same Wifi.
    Has my Wifi become apple phobic ?
    Any suggestions.
    Thanks
    Colin

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HOW DO I RESTORE MY CHILDS NEW IPOD TOUCH SINCE I ENTERED IN THE WRONG APPLE ID EMAIL

    I ENTERED THE WRONG email for my daughters Apple Id and so it keeps sending the password reset to the wronfg email. I want to restore my daUGHTERS IPOD AND START OVER WITH NEWE APPLE ID. How do i do this?

    Connect the iOS device to your computer and restore via iTunes. Place the iPod inRecovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • My ipod touch wont turn on!! the apple logo appears for five seconds and then it goes to a black screen and it has been repeating this when im not even touching it!! help!!

    my ipod touch wont turn on! i pressed the power button and the white apple logo appeared for five seconds and went to a black screen, and then back to the logo for 5 secs and back to the black screen for 5 secs. im not touching my ipod and it is still doing this. i did leave it onover night to update ios, is this why??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • New iPod Touch connected to wifi but will not open any browser

    I just purchased an I pod touch w/ the software upgrade included, but the touch will not connect to a web browser through safari, youtube, or any internet based channels. I use a belkin router which is showing up under the settings in my iPod Touch. The connection is a 15meg DL and 1 meg UL so I don't believe that speed would be a problem. Please Help

    Despite the WiFi connection sign you may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • My Ipod Touch 4 froze during the actualization and is stuck half-way though loading from few days now. How can I reset it? I tried everything and it wont even switch on. HELP!

    It wont switch off or keep loading. I switched it off from the itunes, on, off, on, and back again. The load bar ?(the one under the apple sign when your ipod is switched off and loading) is not even half way through loaded. Is there a special button to reset the ipod? I honestly care If i lose all info. I just want it on!!!

    If it is currently off, you can put it in recovery mode then do a restore, then restrore from backup. I have a history with...kinda...messing with my iPod Touch so I had bricked it a lot. You can put it in recovery mode by:
    Having your USB charger connected to the computer already
    iPod off
    Now you hold down the iPod home button, keep the iPod off though.
    Now, while you are still holding the button, plug it into the computer.
    Keep holding on to the button until a screen with a USB cable and an iTunes logo show up.
    Now open your iTunes on the computer and do a restore.
    Honestly, this is my last stand, I hope this helps!

  • My ipod touch 4th generation adjusts the volume no matter what headphones i have plugged in. why is this? how can it be fixed?

    will apple fix this for me even if im not under warrenty? it gwets annoying having to take my ipod out of my pocket every time i have to turn it up.

    They can give you a replacement unit for a flat fee if it's no longer in warranty. See here for pricing.
    http://www.apple.com/support/ipod/service/prices/
    If a reset, restore from backup, or restore to factory defaults fails to resolve the issue, it's mostly hardware related. In that case setup a replace or repairment either through Apple or a third party repair company.
    http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    B-rock

  • HT201302 I have an iPod touch, and want to transfer all my photos (taken over the last year) to my Windows 8 PC, how can I do this?

    I believe it's 4th gen - it does have a camera (hence all the photos).
    I don't want to update it to the latest iOS since I'm concerned it will slow it down too much, but it is running 5.1 I believe.
    I have a Windows 8 PC and have just installed iTunes, and iCloud panel. Photostream doesn't seem to import old photos, though I've tried this route. I can't find the "enable disk use" button in the new iTunes, and when I try and open the iPod through the start menu I just find an empty DCIM folder.
    Any help is much appreciated! Thank you!

    On Windows, the drivers responsible for recognizing an iOS device as a camera are built into the Windows operating system. The steps below may help identify a driver-installation issue and resolve it by reinstalling these drivers. Before starting, find out if you have Windows 7 N edition. If so, see the additional information section below for a required Media Pack to recognize cameras.
    From the "Unable to import photos" page.
    Does Windows 8 not have these drivers? Is there a fix?

  • My new iPod Touch (4th gen) Won't Connect To My Home Wireless Network

    Hi Out There,
    I just recieved my new iPod Touch yesterday, inputed my SSID (Network Name), security type WPA2 and password key and It won't connect. Can anyone tell me if I have to do anything else like fill in all the other fields like IP address, mac address, subnet mask, default gateway or anything else like that or should it have connected with the info i provide as I feel this is the sufficient enough information for it to connect but as far as those other fields that I've mentioned does it auto-fill in those other fields when after it connects? Cannot get on.
    Thanks for your responses

    Finally figured it out and Apple doesn't even mention this in their article. I did what some other guy did. I took the Touch's physical address or (Mac address as they often refer to it and put the mac address of the Touch in my router's mac address filter list and "Bang" the internet came right on. Problem solved.
    null

  • How can I sync my new ipod touch with my itunes 9.2.1 itunes

    Ok I have got a mac mini running  os 10.4.11 at 1.25ghz 1 gb and have a new 4th gen ipod touch I can't sync it to my itunes 9.2.1 please tell me I can get this to work without paying any more out!!!

    Thanks Jim I thought I might have to upgrade software but to be honest I was looking at investing in a new Mac in the summer but wanted a cheap fix to get my thousands of tunes that i have bought from Itunes onto my new ipod touch Ironically I have a samsung Galaxy s2 I use for work which interfaces with my mac no problem... I find it very odd apple are treating there own customers in this way making me upgrade to interface with their own products!! Which after having macs for the last 20 years i am doubting my decision to carry on with my loyalty to a brand that is doing this!!
    Sorry not your problem.. thanks for the advise.

  • Brand New IPod touch bought at BestBuy- Unopened -Want to Return-Question

    Hi
    I bought a new Ipod Touch at BestBuy32g, along with accessories like Cases, portable speaker for Ipod etc.,
    They are all unopened. I have a receipt too.And it's only 7 days since I bought them.
    I changed my mind and want to return it now. Will there by any restocking fee, if I return them within 30 days?

    No there is no restocking fee. So as long as you are within the return period you can return it and get the full refund.

  • Brand new iPod Touch 4G won't reconnect to WPA Enterpise wifi network

    I have a brand new iPod Touch 4G.  Wifi connection at home, where I have a WPA2 "personal" network, works great.  However, at the office, I have a WPA/WPA2 Enterprise network.  The network is not hidden, but the only way I can connect to it is via the "Other..." option, because I need to specify WPA Enterprise.  This means I need to type in the network name, my userid, and my password to connect to it.
    The problem is that after being asleep for about 15 minutes, the iPod is not able to reconnect to the network.  When the iPod awakes, it does not automatically connect to the network.  When I go to the Wi-Fi Networks setting, I can see the network name in the list.  If I click on it, my iPod says, "Unable to hoin the network xxxxx".  If I click on the (>) next to the name, I'm given the option to forget the network, which means that the iPod remembers the network, but somehow it can't connect to it.  My option is to "forget" the network and re-establish it by hand.  Obviously, this is not acceptable.

    I know WEP is bad, but the other thread implies that some iPods/iPhones running iOS 5.01 show WEP Enterprise as an option.  It seems to me that my iPod has a different wifi chip in it, which is why it's broken, even though my iPad running 5.01 works.  Maybe the new wifi chip does not support WEP Enterprise?  It does offer regular WEP though, so I'm still confused.

Maybe you are looking for

  • Overflow in the CAN communication chip

    Hi, I received this error from a CAN Read vi : This error -1074388920 occurs in : CAN Read (Multi-Chan Single-Samp 1D Dbl).vi - NI-CAN:  (Hex 0xBFF62048) Overflow in the CAN communication chip.  This error occurs when frames are received back-to-back

  • Mega pc 651 not working since upgrading to xp

    I have recently upgraded my pc to windows xp and since then my tv tuner is not working. Not knowing much about drivers etc, can anyone tell me what drivers I should be using and  where to download them from. I also don't have my original msipvs & win

  • Executing sql server procedure  from oracle via db link with out parameters

    HI we have successfully created the link between oracle and sql server via DB LINK also able to access table from the sqlserver via dblink Can any one tell me how to execute procedure with 1 input and 4 out parameters from pl\sql is it possible using

  • How to manage colors when printing on colored paper?

    I created a design with correct colors and of course when I do the "simulate colored paper" the colors are off (as expected), is there an easy way to alter the colors to match the original colors so that it prints correctly on the colored paper? I fi

  • Download Photoshop CS6 question

    I downloaded Adobe Photoshop, but now I can't find it on my PC. How & where do I look for it? I need Downloading for Dummies! Thanks