I built a DAQ vi in the labview6.1 and i compiled it to a dll.And then I wanted to call it and expected it pass acquired data to visual c++

I built a DAQ vi in the labview6.1 to acquire four channels'data(use pci_6110E) .And i compiled it to a dll.I wanted to use visual c++ to call it and expected it pass acquired data to visual c++.

Hello
If you are using Visual C++, then I would recommend using the NI-DAQ function calls instead of having labview layer in there. YOu can pretty much accomplish any task using the NI-DAQ function calls that you can by using the LabVIEW DAQ vi's. Plus this way you wont have to worry about passing the correct data type from LabVIEW into C++. You can find the examples for using these function calls under ../NI-DAQ/Examples/.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Similar Messages

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

I am doing a book. Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

No
All photos frames must contain photos or you can not order the book
LN

How to give the length , cardinality and format when creatin a data type?

Hi,
I am new to XI and i wish to know how to give the cardinality ,format and length when creating a data type .Also please let me know how to give the following?
cardinality --repeating and required
non repeating , optional
thanks and regards

When you are defining the elements of the datatype there are columns where you can do what you need:
column type: here you choose the type of data of the element
it can be a standard type or a user defined one (if you click one time only it should appear an icon in the right for input help: click there and choose the type you need)
column occurence : in a similar way of column type here you define the cardinality of the element (min occurence and max occurence)
setting min occurrence: 1, max occurrence 1 or unbounded --> required
mmin occurrence 0, max occurrence 0, 1 or unbounded --> optional
about the attributes there are directly the choice between required or optional.
 column details : here you define the length of the element if it is a string or a lot of other things if the type is a different one.
I hope this will help you

Registry Error: The user ID and password pair passed in a get_authToken mes

Hello
I am trying to publish web service thruth the UDDI CLINET
I got into
http://sap-xiqas:50000/uddiclient/process/
chose Publish Service Definition
SAP Registry
and tried login with my user which has sap_all
and also with j2ee_admin
and get the following msg
Registry Error: The user ID and password pair passed in a get_authToken message is not known to the Operator Site or is not valid
have some1 managed to solve it ?
thx Shai

Hi,
Use should use:
call function 'SUSR_CHECK_LOGON_DATA'
          exporting AUTH_METHOD = 'P'
                    USERID      = k_user
                    PASSWORD    = k_senha
          exceptions
               others = 1.
if sy-subrc = 0.
   write 'Ok'.
else.
   write 'Not Ok'.
endif.
Best regards,
Leandro Mengue

I am still having issues when visiting a website and then selecting the back icon and going to days old data instead of current. How do I fix this?

I am still having issues when visiting a website and then selecting the back icon and browsers is returning old data instead of current. How do I fix this?

found a solution thank you firefox live chat!!!

I just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

i just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

Copy everything from your backup copy of your old computer to your new one.
Then sync.

I have the IPhone 4s and it is up-to-date with all upgrades. Just recently I changed my YAHOO! password however each time I go into settings to update the password I keep getting "YAHOO! Server Unavailable Please try again later."

I have the IPhone 4s and it is up-to-date with all upgrades. Just recently I changed my YAHOO! password however each time I go into settings to update the password I keep getting "YAHOO! Server Unavailable Please try again later." I have lost my YAHOO! email connection, all calendar entries and saved notes.

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

I have the iPad 2 and having difficulties accessing my data from my Dropbox app

I have the iPad 2 and having difficulties accessing my data from my Dropbox app to forward to another source,tried every setting nothing works can any one assist please?

You need to explain exactly what you are trying to do.
Tap on a document, photo, file or whatever in the DropBox app and then tap the square with the arrow that points upward in order to send the item to another app or to email it.

IMac 27 on the USB cable and electric current passing over me.

Guys, I have touched on my iMac 27 on the USB cable and I have got an electric current passing over me. My feet were naked. When I got my shoes back the problem gone. Is this normal? Is it safe for my iMac and external devices?

hmmm, I have nothing attached on them, it is just two usb cables one for my Nikon the other for my multipad and nothing was attached on them. And I have touched by accident on the one and i have this small current passing though my hands and then i have touched on the other one to see whats happening and same result. I had just took a shower and barefoot. Then when i put my shoes on. Problem gone!
thank you

Is it a good idea to install an SSD as the main drive and a regular HD for data?

Please help me make the best decision on making my machine faster without having to purchase a new one!

Nothing is going to make that system any faster. The Speed of any system it determined by the speed of the CPU, RAM and Graphic processor. The speed of the hard drive or SSD has little to do with the overall speed of the system.
Yes with a faster hard drive and certainly with a SSD the system will boot faster and load programs faster, and with some programs that use the storage media (HDD or SSD) to store files while running, which will SEEM to make the whole system faster, but in reality it is not. The CPU and memory can only do so much in any given time period. With newer systems that speed is faster then with older system and there is nothing you can do to make an older system as fast as a newer system with a more modern, faster, CPU and faster RAM.

Dear, Apple Teams, when i try to update my Iphone5 it keep saying your softwear is up to date, but still in the old version and how do i up date to the version 7 ?

Dear Apple Teams
when i try to update my Iphone5 To the new version 7 and my phone keep saying your phone softwear is up to date , but it still in the old version 6.
can some one help me about broblems ?.
Thank you.

Did you change the ID in Settings>iTunes & App Stores>Apple ID? Tap the old ID and sign out and then sign in with the new one. If not running iOS 6 it will be Settings>Stores>Apple ID.

Time Machine: removing the backup drive and using it for other data

I am trying to stop the time machine backups of my data and use my External HD for other data. Ia m new to the MAC world and I need to know how to do this. Almost like I want to shut Time Machine down and reformat the disk that was being used for the backups. Thanks for the help.

The big switch in the Time Machine preference pane stops Time Machine from performing automatic backups. I would be inclined to recommend you switched that to off but left the disk assigned as designated backup disk on the Change Disk panel because, if there is nothing assigned there, Time Machine will ask you every time a disk is attached which it could use whether you wish to so assign it.

I have the first iPad, and it keeps crashing no matter what program(safari) app (iTunes) or game I use. I check the updates regularly and I'm up to date. Why does it keep crashing and how can I fix it?

I have the first iPad (which is considered ancient). I'll open safari and no matter what I'm searching after a few minutes it crashes (it will close safari and bring me back to the main app screen). The last few days I've been searching song on iTunes, and I have the same issue. It closes my iTunes and brings me to the main app screen.
I have checked my updates and everything is current for this iPad. It's a 64gb iPad with 54gb of available space so I know it's not a storage issue.
Does anyone have some pointers on how to keep it from crashing all the time?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

How to get the currrent month and year from a new date object

If I create a new Date object as "d",
java.util.Date d = new java.util.Date();how can I format the date to get the current Month as 'Jan' and the current year as '2008'. So if I have something like d.getMonth() gets the current month as 'Oct' and d.getYear() gets '2008'
Thanks,
Zub

[Read the flamin' manual you must. Hmm.|http://en.wikipedia.org/wiki/RTFM]
~~ Yoda.
Well no actually, he didn't say that, but he should have.
Cheers. Keith.
PS: Don't say that to a 7 foot pissedOff wookie when he's got his head stuck in a smoking hyperdrive, and you're being chased by a S-class battle cruiser... Ask Yoda how he got to be so short.
PPS: It is the SimpleDateFormat you seek ;-)
Edited by: corlettk on 14/10/2008 22:37 ~~ Also far to slow... but funny.

I built a DAQ vi in the labview6.1 and i compiled it to a dll.And then I wanted to call it and expected it pass acquired data to visual c++

Similar Messages

Maybe you are looking for