I ca not get my airport express to connect to hotel network, I ca not get my airport express to connect to hotel network
It has worked in the past. No luck today. I tried resting back tonfactory settings. Anyone have any tricks
You'll have your best chance if you configure the Express in Bridge Mode.
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Off (Bridge Mode)
Close the browser on your Mac
Connect the Express to the Ethernet port and wait 40-45 seconds for a green light
Open your browser and the hotel's log on / agreement page will open
Hotels are getting smarter about guests connecting their own routers and some of the newer networks will simply not allow a router to connect to the network.
Similar Messages
-
Airport Exopress light is solid green, but I can not get on the internet. Does anyone have a suggestion how to fix this?
Would you please provide some more information about your current network so that we can help you? For example, is your AirPort Express the only router in your current network configuration? That is, is it connected directly to a broadband modem or to another router upstream of it? Regardless, what is the make & model of this modem?
When changing network equipment or when setting it up for the first time, it is always a good idea to perform a completer power recycle of your networking equipment. Please check out the following AirPort User Tip for the details. -
My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? HelpContact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list. -
When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?
When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it? -
Airport Express gives heavy 'rumble' on hifi-amplifier, but not on headphone
The Airport Express gives a good sound connected with a headphone or a set of speakers.
But when I connect it to the aux-port of my hifi-amplifier I get a heavy 'rumble' or crunchy sound. Very weak I can hear the music.
Direct connection of the Ipod or laptop to the same aux-port gives good sound.
What can be the problem, that the connection between the Airport Express and the hifi gives the trouble.
Installation went well.
The Airport Express is connected with the wireless network via the router.Thanks for you reaction.
I've tried the amplifier connected to a grounded wall outlet, with the same result.
The audio cable connected directly to my ipod gives a good result, so I think the cable shouldn't give the problem.
I use a analog connection, not the digital optical output.
The Express was connected directly to the wall outlet, no other adapters are there.
I've tried to connect the Express with an external power cable to see if a different place would give a different result, but no.
Thinking of the differences between the connection of the Express to the amplifier and a laptop or ipod to the amplifier is the connection of the Express with a cable to the wall outlet. So some kind of ground-problem could be the case.
But since I don't know how to solve this problem, I still hope that you have more/other suggestions to solve this. -
I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?
I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?
That one doesn't work.
Verstuurd vanaf mijn iPhone
Op 19 nov. 2014 om 13:55 heeft "Apple Support Communities Updates" <[email protected]<mailto:[email protected]>> het volgende geschreven:
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Bob Timmons<https://discussions.apple.com/people/Bob+Timmons?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939>
It has been some time since Apple updated AirPort Utility for Windows. The current version is 5.6.1.
It runs on Windows 7, but I have not checked on Windows 8.
AirPort Utility 5.6.1 for Windows<http://support.apple.com/kb/dl1547>
Correct Answer <https://discussions.apple.com/email/thread/6679920/correct/27128939> Helpful Answer <https://discussions.apple.com/email/thread/6679920/helpful/27128939>
Use the buttons above to tell Bob Timmons and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Bob Timmons, go to the discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/> -
I have a verizon fios cable modem that incorporates a wireless base station using 802.11n and wep 40 bit security. I decided that I could improve poor reception by using two airport expresses as range extenders. I cannot seem to configure them for this function. When I do a manual setup and choose extend a network, I get a message that says the network cannot be extended. I have been able to join the network, and I think they would work as clients, but I'm trying to use them in as additonal base stations to extend my network.
The primary base station, and the two airport express units are all within range of each other.
Now that I have the two units (purchased on sale from Apple this past week), the directions in the manual only include instructions for using them as network extenders with a primary basestation that is Apple? Is this the case?Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your non-AirPort router can be extended wirelessly with the AirPort Express Base Station (AX).
Your only option would be to connect the AX to the Verizon-provided gateway by Ethernet or use Powerline adapters to create a pseudo Ethernet connection between them. A wireless-only connection will not work. -
Trying to use Airport Express (2012) in Hotel and it is not working
Hey folks, the title pretty much says it all. I picked up a new AE last week, and wanted to use while I travel to share out my hotels wired connection to my computers, iPhone and iPad. I am pretty good with networking, so I can't seem to figure out how to get around the double NAT error that I am getting from the Airport utility. It appears that the hotels network is blocking me from connecting. If I use my back up travel router (Zuni Connect) everything works fine. It appears the AE is not getting along with the hotel. Any ideas on how to get around this?
I traveled for years with an AirPort Express and have had virtually no problems connecting to the hotel networks if an Ethernet port is provided in the room.
Up until a few years ago, configuring the Express in Bridge Mode worked just fine, as hotels would allow several devices to connect without problems.
Unfortunately, hotels have become a lot smarter as they look for ways to generate more revenue. Many hotels now will only allow one connection if the Express is configured in Bridge Mode, so I started using the Express in router mode about 3 years ago to get around this.
Security wise, this is actually a bettter arrangement as Tesserax notes, because other users at the hotel cannot "see" your devices.
The Double NAT "error" can be ignored with an option in AirPort Utility if you wish, and the Express will display a nice, green light.
I have no trouble connecting 3-4 devices this way and the hotel only "sees" one device, so they only charge for one connection.
When the hotel only has wireless, that is when I bring out the second Express that I travel with, so I can use one Express to "join" the hotel network and provide an Ethernet signal to the second Express, which is configured as a router to allow multiple devices to connect. The hotel only "sees" one connection this way. -
How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks
What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory. -
When I select the Airport Express as Remote Speaker in Itunes I just see trying to connect and it can't connect.
I changed my password on the Airport and I don't see where I can put in the new password in Itunes.
This problem is on my Imac. On my Mac Pro a window came up asking for password to connect because it was the first time.
I can connect on the Mac Pro but not my Imac.Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker. -
Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?
Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule -
I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same. -
Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?
AirPort Utility 5.5.3 for Windows - Support - Apple works fine for me as well as a test.
-
I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
second question:
software does not install.
I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.
Maybe you are looking for
-
Tolerance Limits with Date and quantity
Hi Experts, We would like to set the GR Tolerance Limits with Date and qty. how to set the Tolerance Limits for Date and quantity..?? if we created PO 100qty and date 01-05-009. if we receive the goods on 20-04-2009 and 50qty... For GR .. Migo should
-
** JDBC Receiver - Oracle Stored Procedure - Large Records - Performance
Hi friends, In my File to JDBC scenario, I use Oracle SP. I designed my target structure as mentioned in help.sap.com. In this scenario, the Sender file sends large no. of records, we have to update those records in the Oracle table. As per this requ
-
What's the syntax for Insert statement in Servlet?
I'm trying to insert record into table using servlet. Can you please show me the statement and syntax of how to use it?
-
How to process 'Sequencial Vertices to Polygon'
Hi~ I made a table of sequencial vertices from polygon using by 'SDO_UTIL.GETNUMVERTICES'. The table has following four columns, *"original primarykey, coord. of X, coord. of Y, ID(sequence)"*. PK X Y ID 11847404 193952.2429 432465.99
-
How to get respose time of URLs
hi, I want to calculate response time of any URL. I implemented it with a Socket class and I/O streams opened on it. But the response time value seems to be greater than actually it is. What are the other ways to implement this. Thanks