I can't activate/deactivate Security Audit via SM19.

Hi everyone,
I can't activate/deactivate Security Audit via SM19.
I tried to activate the security audit but the program has aborted. The Current File Size is 977kb vs Maximum File Size of 976kb. I run SM18 to initialize the log but the activation has aborted once again. The File Size remains at 977kb.
Thanks,
Kiko

Hi,
Please check the following profile parameters...
DIR_AUDIT
Directory for security audit files
FN_AUDIT
Name of security audit file
rsau/enable
Enable Security Audit
rsau/max_diskspace/local
Maximum space for security audit file
rsau/max_diskspace/per_day
Maximum size of all security audit files
rsau/max_diskspace/per_file
Maximum size of one single security audi
rsau/selection_slots
Number of selection slots for security a
rsau/user_selection
Defines the user selection method used
Regards
Ben

Similar Messages

Why is it that on a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock?

On a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock. Why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Security Audit Log SM19 and Log Management external tool

Hi all,
we are connecting a SAP ECC system with a third part product for log management.
Our SAP system is composed by many application servers.
We have connected the external tool with the SAP central system.
The external product gathers data from SAP Security Audit Log (SM19/SM20).
The problem is that we see, in the external tool, only the data available in the central system.
The mandatory parameters have been activated and the system has been restarted.
The strategy of SAP Security Audit Log is to create many audit log file for each application server. Probably, only when SM20 is started, all audit files from all application servers are read and collected.
In our scenario, we do not use SM20 since we want read the collected data in the external tool.
Is there a job to be scheduled (or something else) in order to have all Security Audit Log available (from all application servers) in the central instance ?
Thanks in advance.
Andrea Cavalleri

I am always amazed at these questions...
For one, SAP provides an example report ( RSAU_READ_AUDITLOG_EXTERNAL ) to use BAPIs for alerts from the audit log yet 3rd party solutions seem to be alergic to using APIs for some reason.
However, mainly I do not understand why people don't use the CCMS (tcode RZ20) security templates and monitor the log centrally from SolMan. You can do a million cool things in SolMan... but no...
Cheers,
Julius

Can't activate/deactivate(not the delta setting) 2lis_02_s174.

Hi guys,
I have setup BW 7.0 2lis_02_174 datasource, but unable to locate the
activation and deactivation setting in LBW1 or LBWE.
I am able to setup the statistical data, can run the RSA3 to see the
initial is available, just can't locate activation setting for the
2lis_02_174 as deactivation for 2lis_02_s174 is required for the
initial load.
LBW0 can only activate and deactivate the delta setting not the main
activation for LO datasource, I know how to activate/deactivate for
2lis_02_s012 as well as 2lis_02_SCL, ITM and HDR. Just can't locate
2lis_02_s174 datasource activation setting.
We are using LO extraction method for MM-PUR data, but using
2lis_02_s174 for service data.
Steps taken so far:
1. LBW0 to check 2lis_02_s174 is available.
2. Run statistical setup for the datasource.
3. Check the initial load via RSA3.
4. kick off initial load from BW.
5. initial load fail due to the 2lis_02_174 is still active.
6. LBW1 to check if 2lis_02_174 is still active, can't locate it.
7. LBWE to check if 2lis_02_174 is still active, can't locate it.
Hope anyone get help out as soon as possible as I have tried many things and many times, thanks you all.

Hi Joe
did you try TC OMO2 to activate. Select your info struc Menu/ Edit/ Parameters
For the initial load you have to activate update for LIS Structure.
To make sure that the info structures S174 will be updated, you have to activated it in R/3. For every application in LIS (eg. sales & distribution, purchasing) you have to activate the corresponding info structures you want to populate.
Specify the period split (eg. monthly, weekly) and the update mode.
If you can't see the tables S174BIW1 and S174BIW2 that are used to assist the delta update process within BW you have to set up the LIS environment with program RMCSBIWC or TC LBWO.
If the info source is not generated then ensure that the info structures in R3 can be used as source tables for BW, ffollow in LBW0 and generate the info source but seemingly you say that it is there.
Check in table TMCBIW if status for your info structure is active.
Try this out then follow with the delta updating do first the generate update and then activate.
hope this could help you
with the best regards
Boujema

How can I activate "keychain protect screen" via hotkey

(Translations maybe wrong, I only have the german language here...)
If I go into keychain>settings>show in menu bar there is a little lock in the menu bar.
First option is "protect screen" which is what I need really often in my day.
So how to activate that option via hotkey?
I tried several times but I could not manage to do that.
Active corners with the screen saver dos not work because it feels to slow... I want to press a button and be done...
Going into standby takes to long to reactivate... so the described option seems the right one.
Thanks for any help.
Helaron

I haven't found a way to make shortcuts for the Status menu area.
A workaround would be to use the Move Focus to Status Menus in the Keyboard and Text Input section of Keyboard shortcuts to activate the Status menu, then arrow down to Lock Screen. If the Keychain menu item is the first one in the menu, it will be active on pressing the hotkey for activating the Status menu.
There is a way to throw you back to the Login screen (basically like fast user switching). You can set up that command in an automator Service that you can set a hotkey for.
Set this command as the command in a Run Shell Script action in a new Automator Service. Set the Service to receive No Input in any Application. Save the Service and then create a keyboard shortcut using the Name of your Service. I've often had to activate the service once from the Services submenu before the keyboard shortcut works:
/System/Library/CoreServices/"Menu Extras"/User.menu/Contents/Resources/CGSession -suspend
Make sure you drag across and select the whole command to copy and paste as the little window it creates on this page cuts it off. It's all in the field, but you have to drag across to copy it all.
You might try the steps in this article, but I couldn't make it work: http://www.macworld.com/article/1049080/lockscreen.html
A commenter there also pointed out the Fast User Switch trick.

How often can I Activate / Deactivate the Creative Suite

Hello Support Forum Folks,
I am using Creative Suite at 2 pcs. I want to use it at my stationary pc when i am at home and when i am traveling at my laptop. I would like to solve this by activating / deactivating it on the systems. Will there be any problem when i deactivate / activate it every weekend?
with kindest regards
Adrian

Sorry, hit send too often. You can keep it activated on the two machines
with no problem at all. The EULA allows for two machines as long as you
are the primary user and both machines are not used at the same time.
Bob

Can i activate/deactivate as much as necessary?

If I have CC on two machines at work and also a laptop, can I deactivate it on one machine and reactivate it on another machine as frequently as I want or is there a time required between deactivations and reactivations?

Standard unitinfoobjects dont have Bex tab...if we use customized infoobjects we can

Performance issue of Security Audit log

Hello,
My client would like to activate the Security Audit log on his system. However he will like to know whether there could be any performance issue when activating it. Since I do not have any prior experience, can you please give me your general feedback on this subject. Have any of you experience performance issue when implementing security audit log and what can be done to minimize its effect?

Hai,
Activating Security Audit logs will not affect the performance of your SAP system. Since SAP Systems maintain their audit logs on a daily basis. The system does not delete or overwrite audit files from previous days; it keeps them until you manually delete them. Due to the amount of information that may accumulate, you should archive these files on a regular basis and delete the originals from the application server. This is the only thing you really need to take care since they might fill up the disk space if you dont archive or delete them on regular basis. Also since the data is very sensitive you should take extra care to protect the data.
Please follow the below links for more details.....
http://help.sap.com/saphelp_nw04/helpdata/EN/95/d2a8e36d6611d1a5700000e835363f/frameset.htm
http://www.saptechies.com/faq-answers-to-questions-about-the-security-audit-log/
Regards,
Yoganand.V

SM19/SM20 Security Audit Log

I would like to ask if we need to restart the server once we activated the Static Profile in SM19? I have 3 application servers and only 1 application server's audit log is running. When I try to activate the security audit log for the other two servers, I don't see the audit log updating after I clicked the Activate button. Profile parameter rsau/enable is already set to 1. space for audit files is sufficient. Is there anywhere else I can check why the audit log is not running?
Thanks!

If you set the dynamic filters, then you do not need to restart the server.
If you set static filters, then you do need to restart the server for them to take effect.
This may have changed, but in some releases if you display the dynamic filters and then return to the static filter tab, what you will be looking at on the screen will still be the dynamic filter settings. This can be confusing.

Security Audit Log for XI IB

Hello,
on the ABAP Stack it is possible to activate the security audit log, to log activities on certain objects/functions. Is there also a possibilty to do this for the JAVA-Stack.
We have for legal reasons to log, want users are doing on the productive XI system. E.g. we wanna log if someone is changing the value mapping or configurating the adapter.
Regards, Werner

Hi,
chk out these links
Audit Log
http://help.sap.com/saphelp_me21sp2/helpdata/en/23/c9833b3bb1780fe10000000a11402f/content.htm
regards
jithesh

Security Audit Enable.

Dear all,
we had enabled the security sometime back and it was working fine. after a month, the security log (sm20) says : "The result set for this selection was empty".
I thought that the audit logs had exceeded the storage size, thus i deleted 30 days log using sm18. On returning back to sm20, i am still encountering the same error.
I would like to know that will i need to restart my application server in order to make it active again(btw its already active, in sm19).
I need my sm20 active again!
Kindly help me clear my confusion please.
Thanks in advance.

Thanks for the prompt replies.
Dear Happy,
I understand that I don't need to restart the server but then how can i make my security audit work ? Can U guide me to the solution please? Cuz if i change my profile parameter (as said by Rakesh) then It will be necessary for me to restart the application server.
Thanks.

Monitoring Users (Trace or security-Audit-Log)

Hi,
we have 2 extrernal Users in our system and want to know, what they are "doing" in
our Sytem (Tcode, Reports etc.).
Is the best way to use security-Audit-Log (SM19/SM20) or to us etraces (ST01/ST05/ST11).
Thanks for Help.
regards, Dieter

Hi Thomas,
thanks for your answer. I try as you has mentioned.
Regards, Dieter

In which table can I find security audit settings from SM19?

Hello everybody,
I'd like to give certain users access to the security audit settings that we defined in SM19. They are supposed to be able to read them but not change anything. I've experimented a bit with SM19 authorizations and figured out that a read-only access to SM19 is possible if I deactivate S_C_FUNCT. The problem is that the aforementioned users already have complete access to S_C_FUNCT and are supposed to keep it. The also have AUDD and AUDA in S_ADMI_FCD. Ergo: If I just add the S_TCODE for SM19 they'd be able to change security audit settings and I don't want to allow that.
Does anybody know the table where SM19 saves its settings? Maybe I could grant read-only access to that table via SM30 or SE16...
Looking forward to your answers!
Kind regards
Mario

Hi Mario,
Restrict access for table RSAUPROF , It should do!!!
Regards

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Can't activate iPhone because Apple ID is locked 'for security reasons', can't reset Apple ID because need iPhone to receive two-step activate code!

So here's an interesting one...
I have just updated iOS on my iPhone and it came up with the activation prompt. I entered my iCloud email and password and it told me that my account was disabled for security purposes.
This happens quite regularly as my iCloud account and I constantly get the account locked out as other people mistake it for their account.
The procedure to unlock my account is to visit iforgot.apple.com and select the 'Reset your password' option, enter my iCloud email address, two-step recovery key and then nominate my iPhone to receive a two-step authentication code.
The problem is my phone won't receive the authentication code because it needs activation! My iPad is also listed but also won't receive the authentication code, I expect because my Apple ID is disabled!
Having read the support article regarding what to do when you can't receive the two-step authentication code it says login to your apple id account and manage the list of devices! You what!? I can't login because my account is disabled.
It seems there is a complete design flaw here in that I can't activate my phone without unlocking my Apple ID and I can't unlock my Apple ID without activating my iPhone first!
I've spoken to Apple in the past about this and their response was to login and manage my devices and I pointed out that I could not login in because my account is disabled. They then basically said there is nothing I can do! Really? They won't unlock my Apple ID because they don't have the ability to do so.
If I'm not mistaken my iPhone is no longer fit for propose and if I can't sort this I will be visiting the Apple store and asking for a replacement as basically my device is bricked. I guess I will have to create a new Apple ID and will no longer be able to get to my email on the old account!?
Any folks on here has similar issues or any suggestions?
<Email Edited by Host>

I have something similar going on, but not exact. I basically have a useless phone here because I restored the phone but supposedly when my son's father redid the phone years ago for our son he added the phone to HIS apple id (on find my phoen supposedly) which he no longer has nor uses. I need said apple id and pass to finish restoring the phone. Maybe we should all get together and pile all our bricks in front of apple headquarters so no one can get out of the building and they have to stay there until they fix this. :-P

I can't activate/deactivate Security Audit via SM19.

Similar Messages

Maybe you are looking for