I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC.  When I want to sync my iPhone, I get her data, not mine.

I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC.  When I want to sync my iPhone, I get her data, not mine.

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
iPhone User Guide
Regards,
Jason H. 

Similar Messages

  • How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

    How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

    The Time Capsule drive is a network drive. You have to mount it on the desktop before you will be able to drag/drop files onto the disk. More tips are in this thread:
    https://discussions.apple.com/message/17312017#17312017
    .....and then delete them from the Mac to free up space?
    The Time Capsule was designed for your backups.
    If you move a file to the Time Capsule drive and delete the file from your Mac.....you have no backup. 
    Your only copy of the file will be on the Time Capsule drive. I would only do this with files that I could afford to lose.
    All drives fail. When.....not if....the Time Capsule drive has a problem, you will lose your data.

  • How do I unlock my iTunes account that has been disabled?

    How do I unlock my iTunes account that has been disabled?

    If changing your password does not solve, then contact itunes support

  • HT1338 how do i stop prompt for password for mail account that has been deleted?

    I am repeatedly asked for the password for a mail account that I have deleted. How can I stop this?

    Delete the smtp server entry.

  • How can I delete an iTunes account that has been deactivated?

    I deleted an old Apple ID with the help of a call to Apple Support.  However, my iphone is still trying to use the old ID.  How do I log out of the old ID and into the new?  Or, how can I delete the old ID when it has already been deactivated?  (Cannot delete with phone)

    Only iTunes Support can potentially delete an account (which would also delete any purchase history for it, so you would no longer be able to authorise that content on a computer, redownload it, and download updates to its apps) : http://www.apple.com/support/itunes/contact/
    Or you could just remove any personal info from it (e.g. payment details if you have any on it) and stop using it

  • I'm trying to connect a BlueTooth headset to my Mac Mini. I can discover it, but soon after discovery it disconnects. Can't figure out how to reconnect. My only option seems to be re-discovery

    I can discover the headset, but soon after discovery it disconnects. Haven't been able to figure out how to try to re-connect. And the help section titled "Use BlueTooth has absolutely no information on how to use it. All I can do is re-discover it. Every time I rediscover it, it disconnects shortly afterward. This headset works well with both my iPhone and iPad and has for quite some time. But it won't stay connected to my Mac.

    Tried with another headset that works fine with iPhone and iPad. An LG HBS700. Same problem. It connects for maybe 10 seconds and then disconnects. So it must be a problem on the Mac. But this Mini is out of warrentee so taking it into an Apple store to get it repaired isn't a good solution. Maybe as a last resort.
    Is there a way to select connect on the Mac? Everything else I've connected a BlueTooth device to has both a command for pairing and a command for connecting or reconnecting. I can't figure out how to select connect on the Mac.

  • How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

    How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

    Settings / iCloud on the iOS device to view your settings and options.
    Storage & Backup / iCloud Backup is how you restore the device with your last backup.

  • How do I use my iPhone to connect to the Internet. I down loaded safari v5.1.7 for my PC. I have added my iPhone to my computer but I can't figure out how to setup a hotspot or configure a network so my PC can access my phones data plan. Please help.

    And how am I supposed to answer my own question?

    I can't figure out how to respond so ill go this route. I can't seem to find the button/place to which I can choose, to turn on a hot spot. I have been through every option and searched to no avail. Could it be that my iPhone 4 is not hotspot capable as I was led to believe by the apple sales associate? Is there an app I can find to make my phone a wifi hotspot? So I can get on the Internet to view the pages I want that require adobe which this piece of **** software monger won't even support?

  • I inserted a cd that a friend of mine made me, it says there is nothing on the CD but now I can't figure out how to eject it

    I inserted a CD that a friend made me, it says there is nothing on the CD but now I can't figure out how to eject it.....any help would be very appreciated.

    Restart while holding the trackpad or mouse button down.
    If that does not work, find Terminal in your Utilities folder and launch it.
    At the prompt type
    drutil eject
    and press Return.

  • Can't figure out how to use home sharing

    Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
    I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
    If anyone is able to help me out here, that would be great! Thanks!

    The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
    Thanks for the help.

  • Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

    Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.

    I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.

    kellyfromdanville wrote:
    I am new to Apple!
    Ah, new to routers too.
    Perhaps it's best to have a local computer support person come set you up?
    To explain everything would require writing a book here.
    But this is what you want basically.
    Router, new Wireless N, firmware updated.
    1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
    (guest password to max password length of any iDevices)
    2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
    3: Guest access on devices and computers only.  Passwords written down and stored.
    4: OpenDNS preferred but not mandatory.
    If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
    What your doing now is running the bare bones unsecure router which can be used harmfully against you.
    Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

  • I am trying to connect my new iMac to my Buffalo router.  I forgot my router password, so I reset it and it is working.  I can't figure out how to reset my router password and lock it on my iMac.

    I am connecting my new iMac to my Buffalo router.  I forgot my router password so I pushed the reset button and my computer was able to connect.  The problem is, I can't figure out how to set my new password and lock the router.  I went to the Buffalo website and downloaded the CD, as I can't find that either.  I can't open any of it because it says it is Windows and can't open it.  I am new to Apple!

    kellyfromdanville wrote:
    I am new to Apple!
    Ah, new to routers too.
    Perhaps it's best to have a local computer support person come set you up?
    To explain everything would require writing a book here.
    But this is what you want basically.
    Router, new Wireless N, firmware updated.
    1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
    (guest password to max password length of any iDevices)
    2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
    3: Guest access on devices and computers only.  Passwords written down and stored.
    4: OpenDNS preferred but not mandatory.
    If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
    What your doing now is running the bare bones unsecure router which can be used harmfully against you.
    Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

  • Can't figure out how to stop my MBP from opening programs at startup, namely word and messages

    Recenty my MBPro has started opening MS Word and Messages at startup and I can't figure out how to stop it?  I've tried selecting and de-selcting the startup option from the dock but this doesn't help.  Does anyone have any suggestions?

    System Preferences has a setting for this.
    In the Users & Groups section you will fine a "Login Items" header.  This is a list of all the programs that will open automatically when you log in.  You can select any program and click the [--] button below that window to stop the program from opening automatically.

  • We have two apple ID's and two libraries.  My daughter's IPOD is syncing with my library and I need to change this, but I can't figure out how.

    We have two apple ID's and two libraries.  My daughter's iPOD is syncing with my library and we really want to go to just one library--Mine for ease and we can't figure out how to do it.  Please help!!!

    Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
    If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

Maybe you are looking for

  • ASSET CONFIGURATION

    HI, I want to configure Diffenent nature of asset as dropdown  option at the time of asset master creation. Say e.g i have created one asset class as Computer .Now i hwant to have different drop down viz Laptop ,ups,printer etc . I  do not want to ma

  • How to modify Time Capsule wireless clients?

    I have a Time Capsule that I use as the router for the house. We've had a lot of computers connected to it over the years. What I am wanting to know if it is possible to remove wireless clients that are connected or previously connected. Under Finder

  • Numpad 789 and 123 not working in Quick Apply[ctrl+enter] window.  [CC2014.1]

    Hi guys, We recently switched to CC2014 from CS5.5 and one of the feature we had been using a lot before was the Quick Apply window.  However when we want to use the Quick Apply feature in CC2014.1 with the numpad, the numbers 789 and 123 don't work,

  • Acrobat JS vs. LiveCycle Designer

    Up until now, I have only created forms in Acrobat using Javascript, but I'm working on something that requires a client to be able to embed a logo into a PDF. I don't believe there is a way to do that with Javascript, so I'm delving into LiveCycle f

  • New iMAC - Time Warner POP Email Send (SMTP) Not Working

    Greetings, Have used cinci.rr.com account for years across many different types of PCs. New to mac world. My new @mac.com account works fine for sending and receiving. When I added in my cinci.rr.com pop account, I receive fine, but no joy on the SMT