I can't find a wifi printer on my imac

Hello,
I can't find a wifi printer on my imac. It's always linked automatically to wifi printers before. It's an HP deskjet, I've tried downloading drivers for it, but still no joy. Any ideas what I should do? Thanks,

In future posts, please tell us more of the details - which printer, which Mac, which OS X version, etc. Have you changed anything lately?
First thing I would try is Reset Printing System (and after, try adding the printer again):
Mac OS X: How to reset the printing system - Apple Support
Read here about which printers are supported, and how we Normally get drivers now (Not by downloading directly from Manufacturer):
OS X: Printer and scanner software available for download - Apple Support

Similar Messages

  • My iMac does not find my wifi printer or my Chromecast.

    My iMac does not find my wifi printer or my Chromecast. I was able to ping the chrome cast and printer and I'm able to connect to these devices with my windows computer, iPhone and iPad. I have OS X 10.9.2. I'm able to print by setting up the printer using the IP address that was assigned by my router instead of letting my iMac do the finding. It seems that the iMac either does not like the info that is receiving or something is blocking the signal (other than the firewall, which is off). Could someone have an idea what the issue might be?

    Hi MikeMart0923,
    If you are having issues adding or connecting to your WiFi printer from your iMac, you may find the following articles helpful (apologies if you have already seen them):
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    Note: This is assuming you have a simple network configuration, with only a single router/WiFi access point.
    Regards,
    - Brenden

  • I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

    A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

    Find the documentation for your router and look up "Reset to Factory Defaults."  This process will put the router back to the way it was when you bought it.

  • How can I find my wife's iPhone? She has a different iCloud account from me.

    How can I find my wife's iPhone? She has a different iCloud account from me. I can find all of my devices on my iCloud account. But since the last software update we needed to set up separate iCloud accounts in order to be able to use iMessage independently.

    Interesting. This never occurred to be a problem to me but I think I can see your point. Leave feedback for Apple on this here:
    http://www.apple.com/feedback/icloud.html

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

  • Macbook Air can not find my wifi. It detects all the neighbouring ones but can not find mine.

    Hi. I have a new (5months old) Macbook Air that used to work fine. Until now...
    I went for a 2 months trip and left my macbook at home, so it was not is use for the past 2 months. When I turned it on a couple of days ago, the date and time was messed up (automatic setting showed me 01.01.2012.) and the bigger issue, it can not find my wifi network. It detects all the neighbouring networks but mine. I have tried setting up a new network, troubleshooting, etc, but nothing has worked. My iPhone and my other laptop (hp) can find the wifi without any problem. The network settings have not changed either...
    Any idea how to solve this?
    Many thanks!

    Hi,
    thanks for your reply.
    The problem is, I can't even open the network preference pane, as it is not responding.
    Earlier I wanted to log into iCloud - it started loading and now it is completely 'frozen'. I can not close it, I can not quit system preferences and I also can not restart my macbook (it won't let me until I quit system preferences).
    I am sure the solution is very easy, but I have no idea what to do
    Many thanks for your help in advance!

  • My ipad can not see my wifi printer

    my ipad can not see my wifi printer ????????

    Is it an AirPrint enabled printer ? The supported models are listed on this page, and there is also a bit of troubleshooting at the bottom : http://support.apple.com/kb/HT4356
    If it's not an AirPrint model, then some manufacturers have their own apps in the iTunes app store, and there are also third-party apps such as Print Central For iPad and Print n Share which might work with it.

  • My airport can't find my wifi network.

    I have a Gateway 2wire that I came with AT&T Uverse.  It has been problematic at times, but now my iMac can't find the wifi network at all.  It doesn't make sense to me. Sometimes it works great, sometimes it keep dropping off.  Me and my wife both have iPhones, my iPhone found the network no problem, hers could not, so I entered it manually and that worked.  Then my iMac was working great on it, then all of a sudden, for no apparent reason, it stopped working and now it can't find the wifi network.  I can't even enter it manually.  The iPhones see it and work fine, my Wii see's it and works fine.  But my new blu-ray can't see it either. So why are some of my devices working fine with it, and others can't even find it.  I have worked with AT&T a few time and they keep saying it's not the 2wire.  I don't believe them, I have read to many reports of similar problems with the 2wire with AT&T.  Is there anything I can do to solve this.  I keep thinking I wan't to get an Airport Extreme and connect it to the 2wire, I have read that it is possible and will work, but I wan't to know why this router is visible to some devices and not others. Does anyone understand this.

    I'm not sure what you mean. You can't find the express to set it up.. or you can't find the network created by the express?

  • HT201415 i can't find my wifi password for iphone 4s

    i can't find my wifi password for my iphoine 4s.  is there a way to reset it.

    Many internet providers put the WiFi password on a stick on the bottom of the router they send you, so start by looking there. If you changed the password from what it was originally or didn't get the router from your provider, you'll need to determine the make and model of the router and see if you can find the manufacturer's instructions for resetting the password. You might also contact your internet service provider for assistance.

  • Computer can not find the wifi internet

    Goodmorning,
    I have a mac book pro (with lion) and wifi internet at home. All of a sudden my computer can not find my network although it is available and working as an i pad and a mobile are working via this wifi network.
    I tried 'create a network' and 'join other network' but it looks like the computer can not find the wifi network. My computer has internet access via cable, but just by plugging in the cable wihtout changing the settings (switching off the wifi).
    Any idea what to do ?
    Thanks

    The Mac on cable uses Ethernet. Wi-Fi uses AirPort. Try and delete your Airport setting and re-enter your configurations again.

  • My iPod touch can't find any wifi?

    My iPod touch can't find any wifi at all. I've restored it reset everything and it still can't find the wifi even when I had it right next to the router. Any help please? I got this ipod from my brother a few days ago and apparently the wifi worked fine until he updated it to the 3.1 update or something like that so he gave it to me. I want to be able to connect to the wifi in my house and it just won't. Any help please????

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could be a poor antenna connection
    Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit

  • HT1695 Can't Find any wifi Networks after updragding to 6.0.1

    My iPhone 4 can't find any wifi networks after upgrading to iOS 6.0.1 and i can't downgrade what should i do ?
    I swtiched off  the connection from mobile and restared the router and nothing changed!
    Note: My laptop found about 7 Networks my iphone finds nothing

    I have the exact same problem.
    It popped up on my 8gb iPhone (2.0.1) first time when i just purchased it. The Wheel spins as if it's searching for hotspots (and there are a lot of hotspots where i live). My MacbookPro finds them without any problems.
    Second time i experienced these problems, it was after i didn't have a chance to charge the phone, and i figured it was a "Low battery, disable wifi" thing. But even though i charged it fully, it still can't scan networks.
    I managed to discharge the battery, until the 10% warning popped up. I connected the charger, and sure enough, it was able to scan networks. Then when i tried to join a network, it stopped working again, and since then i've been unable to scan wifi. Now 3 resets, and a lot of fiddling later, i'm no further than i was before.
    The fact that it was able to scan momentarily points me in the direction of the software, but i'm not so sure anymore.
    Hope someone can shed some light on this.

  • My mac snow leopard 10.6.8 can not find my 3050a printer wireless

    My mac snow leopard 10.6.8 can not find my 3050a printer even though i have added the printer bonjour to my print list, even though the blue and white light s are on on the printer panel.
    I have good signal strength
    the printer ip is 192.168.1.8
    Help

    OK, using these instructions: https://www.broadbandadvice.org.uk/Website/Routers/HG532.htm  change the channel to 11.
    Now, if and when the printer is connected with a vaild IP address, let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1398 I can not find my wifi network on my ipad. My iphone conected fine.

    I can not find my wifi network on my ipad, My iphone connects fine. I tryed restarting the ipad and router. Please help

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • JDBC: Closing Connection does it close statement and resultset

    In my application I am facing ORA-0100 Maximum open cursors exceeded problem. We are executing quite a few queries and stored procedures before we close the connection object. But in few places statements and resultsets are not closed. Can these be a

  • External Monitor Static When Waking From Sleep

    Hello community, did anyone had the disrcibed problem and knows about it? After waking up from hibernation, display is static an doesn't work on; getting of from thunderbolt and put in after a little bit of time doesn't help.

  • How to judge index health

    Hi i just want to know how to judge index is healthy i know i should look at BLEVEL , LEAF_BLOCKS , DISTINCT_KEYS , CLUSTERING_FACTOR in dba_indexes but how to calculate from this value the health of an index I know that BLEVEL should be 3 or less ,

  • Finder crashing on right click

    I am running OS 10.4.8 on a MacBookPro Core 2 duo/2.33 GHz/3GB RAM machine, and have been finding lately that I am getting Finder crashes when I right (contextual) click a file in the Finder. Often it happens when I want to change the colour of the i

  • On verify database option in release pack 2

    Post Author: kamesh_sivva CA Forum: .NET hi             Please help me out on this... When ever i update my Typed data set which is associated with the report, select verify database option on .rpt file , I am getting just-in-time debugger window thr