I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

Find the documentation for your router and look up "Reset to Factory Defaults."  This process will put the router back to the way it was when you bought it.

Similar Messages

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

  • How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on?

    How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on? I can see my macbook but I cant see the last location of my ipod touch. I lost it a few weeks ago and figured it would show up. But it has not and I need it again for my job. Please help.

    There is nothing you can do now. There are apps available from the app store that would give you that information if installed before it was lost/stolen.

  • I've downloaded a rented movie and transferred to mi ipod touch but can't find it on the device - where do I find it to play

    I've downloaded a rented movie and transferred to my Ipod touch but can't find it on the device to watch it - where do I find it?

    Hi,
    Have you tried using your iPod's Search function to find the movie?  (The Search function is to the left of the home screen.) 
    Hope this helps! 
    ---likeabird---

  • I just changed the channel on my Airport Extreme and now can't get the Airport Express to recognize the network.  What do?

    I changed the channel on Airport Extreme to get away from interference.  Now I can't get my airport express to recognize the network.  What do I do?

    I would suggest that you perform a "hard" reset on the AirPort Express Base Station (AX), and then, using the AirPort Utility, reconfigure it "join" or "extend" the AirPort Extreme as appropriate for your networking requirements.

  • Set up belkin wireless router now cant send mail

    I set up a belkin wireless router n1 for a thinkpad t61. my primary computer that I'm useing is a imac g5.  I went through the tourturus process of speaking with tech support both with verizon for my dsl modem and belkin with the router.  I was told and walked through the steps of bridging the modem, whatever that means. why i have to bridge the modem I have no idea. I was told by verizon in order to set up a secure wireless network it had to be in bridge mode.
    problem now is that I can send simple e-mail on the mac but when I try to send pictures with e-mails it wont send the mail.  is it a problem with bridge mode?  Please help if you can.  very frustrating not understanding what needs to be done or why im doing it.
    thank you adam z.

    Change the Wireless Settings on your router and re-connect to your Wireless Network...
    To change the Network Name/SSID follow the link here , to change/enable wireless security follow the link here , now check if you can locate the wireless network on your wireless computers and attempt to connect...

  • Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

    I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

    oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

  • How do you change the name of a document in pages on an iPod touch?

    I am on my iPod touch and I want to name my document in Pages. How do I do it?? I know you can, but how??

    nevermind! I figured it out!! You just have to be in where all your documents are shown, hold the NAME (not the document it self, the name of the document) and if you hold it (tap it) for long enough, it will bring up the change document name screen.

  • WRT54GC Wireless router problem with iPod touch and Ipad

    Hi
    I have a WRT54GC wireless router and both my ipod touch and ipad can connect to the network. They can both use the internet for like one minute and then the internet becomes very slow, and dies. Network connections are lost and I'm getting messages like 'can't connect to itunes' or 'lost connection with youtube'. The wireless router works fine for the laptops in the house (all windows). In the house where I live in the week (closer to my school) there is another router and i don't have the problem over there, also no problem to connect to my schools wireless network... So I think it's a combination problem of apple products and that router. I've tried a lot, like resetting network configuration, updating firmware, changing from wpa to wep1,... Anyone an idea?
    Thank you
    Bert

    oh and the connection to the router isn't lost.
    Thank you

  • TS1398 i have an issue with searching for WIFI it can't find a WIFI network on my iPhone 4S i tried to do the following solutions but it didn't help. what should i do????!! (my 3G still works)

    Please Help me!!

    Can you go to Settings/WiFi, or is the setting greyed out? If it's greyed out see this: http://support.apple.com/kb/TS1559
    If you can go to Settings/WiFi do you see any networks? Is the problem with one network or all networks?

  • I have just unpacked My new IPhone after setting language The Phone can not find My wifi Network. My orter devices has no problem so there is no problem with My wifi net

    I have just unpacked My brand new iPhone 4 and started The settings, chipsen language and then The Phone tres to find My home Network without sucess. My orter iphones Worms with My wifi so there is no fail there.

    More than likely there is a fail there.
    http://support.apple.com/kb/TS1398

  • I installed the new itunes 10.4 update and now my ipod touch 4g is stuck in recovery screen

    i tried reinstalling itunes and reseting my ipod by hitting home and power buttons
    i did everything on the trouble shooting page... dont know what to do, any help is appreciated

    Try here >  iPod touch: Unable to update or restore

  • When my daughter connects to our home wifi she has to be within 5 feet of the modem, once she moves upstairs she loses wifi connection and then when choosing the network, it can't find our wifi network?

    When my daughter tries to connect to our home wifi, she has to be in the basement within 5 feet of our modem.  Once she comes upstairs she loses the connection.  All of our other devices connect to the wifi on all levels of our house, including her Dad who also got an iphone 4 and her ipod works as well as her brother's ipod and my blackberry.  I have tried resetting the network settings to no avail. I have already had our modem rebooted through our internet provider so I know the signal is good (as well as all other devices connect to wifi) I am losing sleep over this and she is quite frustrated so any help would be appreciated.  I'm starting to wonder if it's a defect in her phone???

    Is her iPhone in a case by any chance?  If so, remove the case and try again.  How does her iPhone work in free Wi-Fi locations?
    Try resetting the iPhone...
    Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release.  This may take up to 10 seconds.  This is the equivalent of a re-boot and you will not lose any data.
    If none of the above work take it to an Apple store or AASP for evaluation.  She will not be charged folr this and they will suggest a solution if there is a fault.

  • I lost my ipod touch i can't find it all i know is its in the house is there a way i can locate it with out the ipod being connected to the computer

    lost ipod

    Depending on how you configured the iPod, it could be quite easy.  You can use a computer to make the iPod play a sound.  Read the bottom of page 33 in the user manual.

  • Need help with my TOP Box--can't change the channels

    I can't change the channels, go to Guide or Menu by using the Remote Control. (it's not the remote control because i use this remote for my other topbox and it works fine)
    This happened a few hours after i had my Fios installed. (at first, it let me change the channels, then 5 times,2 and now i cant)
    Does any one have the same problem and have a solution for this?
    Thank you very much.

    do the front display buttons work?   and how close is it to the tv,  some tv's create IR interference, and if the set top is too close then it acts how you are describing. 
    three solutions if that is the case.
    move the set top box further away
    change the TV brightness and color settings from the "vibrant" setting or whatever brightest they have and then try again
    Get an IR Extender so that you can move the IR 'eye' - verizon can send you one, they have them on their site or you can buy one at radioshack. 
    try moving it further away for a test only,  or try to get like a piece of cardboard and shield the eye from the TV.  So if the TV is on top put that piece of cardboard inbetween the two, if they are sitting side by side, then put it inbetween the tv so it shields from one another and try it again.  
    Might not be your problem, but we have seen it before. 
    Also don't forget to do old faithful,  unplugging the power for the set top box, wait 30 seconds plug it back in resolves a lot of minor hiccups. 

Maybe you are looking for

  • Af:query re-execute SQL programatically

    On a page I use the af:query which runs against a VO in the DB. The DB gets updated outside ADF BC, so the cache gets stale. Therefore, I would like to re-execute the query programmatically with the search parameters the user used on the last search.

  • How do iViews on SDN automatically resize themselves?

    Hello, I am looking for a solution by which I can resize the current iView. I am working on EP6.0 SP2 Patch 4. I believe SDN embeds a JavaScript in every iView to enable auto-resizing, so that when the content becomes large enough, the iView automati

  • Is there an AWR fragmentation report I can run manually

    I am using 10g on Redhat Linux. I am not using Oracle grid or dbconsole. Are ther any AWR reports that I can run manually from the Linux command line or SQLPLUS that will show me all tables with heavy fragmentation? Thanks in advance.

  • VA02 - Saving - Item data

    Hello Friends, I am facing some issue in SO change - Va02. I have added a line item and have saved it earlier. I select the line item go to the Dispaly Sold to Party details, Go to Sales area Data - Select the Shipping tab. Here we use the delivery p

  • How to bring SOA server UP in the console

    Hi Friend In application deployment >resourse Adapters> soa-infra is down how to bring it up In fusion middleware >weblogic Domain >soa_base_domain> i can see only adminserver,bam_server1 only i cannot able to see soa_server1 How to bring my soaserve