I can't get my print widget to display certificate in PDF file, need help.
I can get my certificate to display with all the variables on the slide, inserted my print widget which asks for a location to save the pdf file. I save it, open it and its blank.
Any suggestions?
Centering an entire page's worth of content is pretty simple, but not as simple as adding align:center to the css of every element.
You likely need to remove a bunch of stuff from your css if that's what you were trying. Seeing the page is going to be the best way to tell you how to fix it.
Many people will use a container like <div id="wrapper"> to center their page, so that's what I'll use in the example. Here is the css that would go in your page's <style> tags, or in your external .css file...
#wrapper {
width:950px;
margin:0 auto;
Then in the html...
<body>
<div id="wrapper">
all of your page's content
</div>
</body>
What this does is creates a 950 pixel wide wrapper around all of your content (the pixel amount isn't as important as the fact that there is a width that is less than 100%). The browser then sets the left and right margin to the same setting using all of the available horizontal space by setting the left and right margins to auto. Basically, if the browser viewport is wider than the wrapper div (anything more than 950 pixels in this example), the left and right margin will split that remaining amount between themselves and center your content.
Similar Messages
-
i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??
See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Safari 5.1.2 always opens pdf files on web pages as a single frame and thus it will not print properly. How can I get Safari to open all pdfs with Adobe Reader 10.1.1?
Carolyn,
Thanks for sending your suggestion on how to solve my problem. Unfortunately, it did not work for me. I trashed the file, quit and relaunched Safari, but the problem remained the same. Although it did not work, I do appreciate that you took the time to try to help me.
Thanks. -
I can't get my droid phone to show up on my mac need help
i have a droid incredieble and can't get it to show up on my computer, any suggestions?
Thanks
amsnowden-so you can send but not receive?
do you not recevie any message at all? have you tried by keeping outlook shut down ?
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved. -
I can not get my printer to work with my new macbook pro. Help?
I have a printer from Dell that my macbook has recognized and it act as though it is printing but nothing is happening. The computer acts like it sends the doc to the printer but my printer is not doing anything. Any suggestions?
Check the Dell website for compatible printer drivers you can download and install.
Once the drivers are installed, open System Preferences > Print & Scan > Print
Then click + to add the printer.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
I can't get DWCS4 to connect to my remote server...need help
Hello All,
I switched hosting companies and even though I have added the correct information in Site Manager for uploading files to the server through DWCS4, I am having problems.
Specifically:
I have a domain, and inside that folder is a subdomain folder. Interestingly, I can upload through DWCS4 to the subdomain, but NOT the primary domain.
The settings are identical, yet I can put files on the subdomain but not on the primary domain.
Any thoughts?
All input is warmly and greatfully appreciated.
Sincerely,
wordmanBurak,
My apologies, I didn't see the last email from the forums indicating your last post.
Yes, I get a 'Dreamweaver connected successfully" message when I test the connection. I suppose I'll ring my host to see what they have to suggest.
Thanks!
Sincerely,
wordman -
Pppppplleeeeaaaaaasssee hhhhhheeeeeeelllllllpppp mmmmmeeeeee
Hello
I am having the same issue, I now my card number as well as the security code is valid so i am not sure what the issue is...CAN SOMEONE PLEASE HELP US?! -
Help
Have you paid for the pre-order - you are only charged for pre-orders when they become available and you download them, you aren't charged at the time of pre-ordering them. Does it show on your account's purchase history : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases (the most recent purchase is above the list).
If you haven't yet paid then you will need a balance or a credit card on your account so that you can pay for it before you will be able to download it.
If you have paid for it then does the Store > Check For Available Downloads menu option on your computer's iTunes find and download it, and/or does it show in the Purchased link in the iTunes store app on your phone and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes ? -
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
Hi I can not get my printer to connect to the internet.
Hi
I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
When I try to download apps directly from the printer it says that it is not connected to the internet.
I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
Please help meHi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
Hi, I have just bought an apple iMac and I can't get my printer to work. It is a Sansung ML laser 4500. I tried to download a driver on thee Samsung website but can't get a driver. Please advise how I can get this printer to work as I don't want to buy another printer.
Please help.
MichaelSamsung does not have an OS X driver for their 4500 series printers. You can check in Print & Fax to see if a driver is provided in OS X, but if Samsung doesn't make a driver for OS X then it's unlikely you will find one that works. Of course you can try the Generic driver, but no guarantee it will work. If it does only some printer functions will be supported, if any.
-
Where can i get a printer driver for my kodak hero 3.1 printer for my macbook
where can i get a printer driver for my kodak hero 3.1 printer for my macbook
Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion. -
How can I get my printer to work after a Yosemite update?
How can I get my printer to work after a Yosemite update?
Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W. -
I get two-sided option for normal printing, but
I can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600. HP says it's an Adobe problem. I'm stuck.
Thanks in advance.
VOIt depends where the pdf is located. If in the Finder or in an attachment to
an email in Entourage, the message is ³You can¹t open the application
³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
If an attachment in an email that has come via Safari, the message is
³Safari can¹t open the file because no available applications can open it².
In each case the menu bar is Finder or Entourage or Safari as the case may
be.
Maybe you are looking for
-
HI , In Tcode FBL3N for G/L line Item display can I create a new layout.It seems the option as deactivated for me. Thanks in advance, Savitha
-
Conversion string from a system unit to another
Hi all i've a problem i'm talking with an oscilloscope. when i ask it some information like X or Y scale, it answers me a string (like 0.0016 to indicate 1.6m or 0.0000005 to indicate 500n). I'm finding difficulties because the first string to number
-
SAN Configuration Error: Buffer I/O error on device sdd, logical block 0
hi, I had successfully to configured dm-multipath.. now i can see the mapped device as # ll /dev/mapper crw------- 1 root root 10, 61 Nov 19 18:59 control brw-rw---- 1 root disk 253, 0 Nov 19 20:00 ovs ovs is an alias for /dev/sdc which is the active
-
Help!!! For some reason, my perfectly normal G5 running Tiger 10.4.7 has this morning started displaying a black frame around any file icons or sometime in the navigation of the finder. Please help, I can't find any infomation anywhere. Many thanks i
-
Encore CS6, Software is not available to decode
I am using Encore CS6 to make a slideshow for a client. She has 488 pictures she needs made into a slideshow with the file names used as a caption on the images. This is easy enough to get by highlighting all the images and clicking the Use Subtitle