FBL3N-Layout Creation

HI ,
In Tcode FBL3N for G/L line Item display can I create a new layout.It seems the option as deactivated for me.
Thanks in advance,
Savitha

Hi Vijay,
Thank you for the reply but it seems that Ctrl F8 and Ctrl F12 options are disabled in that screen.
So we are unable to change the display layout.
Regards,
Akanskha

Similar Messages

Limit on the number of photographs in Photo Layout Creation v5.0?

Hi,
Moving from PSE v4.0 to v5.0 Adobe changed the way Photo Album pages and Photo Layouts are created. In v5.0 and greater the photos are now loaded into Elements Editor and that is where the creation is then made. The problem is that I find the Editor is severly limted in the number of photographs it can handle. In version 4.0 I could easily create an album/layout with 40-100 photographs, however anything over 20 photographs in version 5.0 causes huge peformance issues (to the point that it is just not practical to do). Currently my workaround is to use both version, but this is a cumbersome. Does anyone have any other suggestions or comments about creating photo layouts & albums with a lot of photographs??
Thanks,
Kelly

Okay, I finally got the new machine and got everything setup. Here are the new specs:
Windows XP SP2
3 GB RAM
Intel Core 2 DUO CPU T7700 @2.4 GHz
HDD = 160 GB
Unfortunetly the second HDD adapter requires a SATA HDD which I don't yet have (I'm currently in Egypt and don't have easy access to stuff), so I am still only running off of one HDD. I partition my HDD with the C-Drive containing only program installs and the D-drive containing all data. I setup my TEMP directories and such, both in the environments and in PSE to point to my D drive, which currently has 40 GB free space. (My C drive is down to about 5 GB, but as stated nothing should be writing there).
I did a few creation test runs in both PSE5 and PSE6. I did notice that PSE6 is just slightly faster (although not much). I also noticed that on this new machine (versus my old) things are faster, but in my opinion still drag. For example, I selected 35 photos from organzier and then create photo book ... it took about 5 minutes to load and get the photos placed. In V4 this is just about instant. Then moving photos around (page to page) is a bit sluggish, although not as bad as it used to be. Version 6 now has a save as PDF in the photo book creation, but it doesn't allow you to change the quality settings (ie optimize for viewing onscreen, which then creates a smaller pdf file).
The other thing I don't like is how much hard disk space a collage takes up. The creation for these 35 photos took over 300MB. That will add up fast.
What I realize is that there are two cases for photo creations (1) quick and easy and not ideal for printing - ie smaller resolutions, smaller images, etc etc, and (2) creating photo layouts/books meant to be printed. It seems PSE4 handled case 1 better and PSE5 and PSE6 are better setup for case 2. In the future I plan to make printable books, but right now I'm just trying to post small pdf photo files on my website ... so it's looking like I'll have to continue to use two versions.
I'm still curious as to what type of run times other users are getting when using creations - and how many photos they are adding. I can't imagine how long it would take to add 100+ photos (which I do regularly in version 4).

Use of "NEW FROM PACKAGE" in SAP 8.8 And Master Layout creation

Dear Expert,
A)
How to use "NEW FROM PACKAGE" option at time of choosing company.
and also how to create .pak file ???
Even I don't know by using this feature what are the scope.
B)
How to create master layout in 8.8 when I am using crystal Report.
Thanks
King Kevin

Hi Kevin.....
When you install SAP you have to install Solution Packager also. which will help you to create the .pkg file of your database which will then be used in New From Packager......
And for Master Layout you can import the PLDs as you created independent Via. Reports And Layout. It will ask you the path to store the PLDs. Give the relevant path and your Crystal Report will be executed......
Regards,
Rahul

Planning Layout creation

Hello All,
We have a requirement from our customer to create two new planning layouts as per the data given below.
Example
Costcenter     Costelement                          Amount     Distribution
Costcenter 1     Costelement 1     Amount     Distribution key 1
Costcenter 2     Costelement 1     Amount     Distribution key 2
Costcenter 3     Costelement 1     Amount     Distribution Key 3
Please suggest on how to create the planning layout as per the requirement.
Also, how do we see the output of the layout?
Thanks in advance,
Vinod P

Hi:
To see the output you have to assign the layout to a planning profile and go to manual planning transaction picking the profile where you assigned the new layout.
Besides, I believe to remember you can navigate from the layout (when you are creating it) to manual planning (look for it in the menu ("go to" or similar)). It is useful to test it.
Br
Jose

Hi All, please help me...Real time cube planning layout creation...

Hi All,
Could you help me on below process please.
Iam working with BI7.0. I have real time cube (daily sales) and user need to access and update/add records accordingly.
So for this real time cube I have to create planning layout with the data. User can see that data and update/add.
I dont how to create planning layout (i heared that rsplan) how to show the data.
Also I need some help on ABAP, I need to map some fields from a table.
Actually from a flat file iam uploading data into ODS. In ODS has 3 more extra infoObjects.
Ex: Shopping mall code, tenent number and outlet number info i have to pick contract number from table with routine and pass that contact number into ODS one field. It means Contact number will not come from flat file, thats what need table and routine.
So for that I have to create one table (SE11) with all the information. and i have write routine.
I have to read flat file 2 fields( like A and B) and check the value in a table and get the value C and put into ODS one field. I have to do this with routines.
In the table have A, B and C values. Table also I have to create. so also please can u tell me some steps.
Could you please help on this. Also with process chains for this.
Thanks in advance!
anil

Hi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
       1.      You choose the appropriate InfoProvider.
       2.      You create one or more aggregation levels.
       3.      You create one or more filters.
       4.      You create one or more planning functions.
       5.      You create a planning sequence.
       6.      You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi

Sap Script Tabular layout creation

Hi all,
Can anybody tell me how to create tabular layout for the below text in the SAP STANDARD TEXT.
1. Asbestos                                    7. Hot working, grinding, hot cutting and welding
2. Confined spaces (as defined in
the Combined Spaces Regs 1997)     8. Work on/near overhead or underground services
3. Working at heights (above 2 metres)      9. Grounds maintenance
4. Work near fragile surfaces             10. Pest control
5. Interceptor and drainage cleaning          11. Work on live electrical services
6. Loading/ unloading/ large vehicles     12. Work under lifts and lifting equipment
thanks
GR

create a paragraph in your sap-script with the right tabular.
use ,, as tabs in your standard text
use the default paragraph (***)in your standard text
call with an include the standard text
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
use the paragraph parameter to use the paragraph you created in the sap-script
meaning of the paragraph-parameters
     PARAGRAPH
The text to be included is formatted with its style allocation. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are formatted with the paragraph specified here.
     NEW-PARAGRAPH
The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with NEW-PARAGRAPH.
this will do i think
Gr., Frank

Dynamic template/layout creation in report for web

Hi,
I need some info on how to create dynamic template in report 3.0,
I have to develope one report and it does not have a predefined
template. The display and query will change according to an user
input through parameter form. I have an idea, I have designed a
meta data table to create the template and populate the template
with the query, The report will also take input from the
user(this one I have already figured out, I can embed
Javascript/HTML coding to display edit box/check box etc.). What
I m looking for is a way to generate dynamic template. Like is
there any SRW kind of feature which I can use in
after_parameter_form to create a dynamic layout, pls respond if
anyone has done this before or have any idea
Ranjan
null

Hi Ravi,
I worked on the same requirement but from a service perspective. So below are the activities I maintained to achieve this.
1. Create a service order template type (copy of std).
2. Maintain the copy control settings for both header and items to the service order quotation.
3. Create Service Order Templates and enter the commonly used items in the template. Release the service order template.
4. When creating a service order quote - at the item level, you can see the button "Copy from Template". Click on this
5. This opens up a pop-up where in you can search for all released service order templates.
6. Select the one you need, the items maintained in that order template is copied over to the service order quote.
So the user does not need to enter all the items manually. This is how you user order templates. Please note that it copied only the items, not the header details of the service order template.
Regards,
Siraj

Add column in FBL3N (report)

How do i insert a new field in transcation report FBL3N (G/L Account Line Item Display), that column is a sales order value.?
Regards
Carlos Orden

Additional fields can be added to FBL3N layout using transaction code O7R3. But I don't think sales order value is in the available fields that can be added in O7R3. Go to O7R3 and check the tables that are available in table field. Only fields from those tables can be added.

Partner field in FBL3N

Dear experts,
I am trying to have the "Partner" field BSEG_VPTNR in the FBL3N layout when showing the GL line items
But I can't find this field over there. I have searched the hidden fields and also field status variant.
Can any experts here advise. Thank you so much.
Will assign point for helpful answer.

HI Gurus,
I am trying to post FB50 and I am trying to fill the filed VPTNR (partner) , When i put some customer number, its giving me the error, "GL Account XXXXX is not permitted to enter Partner account number".
The user wants to put the partner number for all accts in FB50.
I checked the field statuses but there is no option for "Partner" field, i.e VPTNR.
I can put the profitability segment, but not "partner".
We have COPA installed and I dont know if its the reason for the error.
PLease advise.
Thanks
Sharath

SQL for webadi layout

Hello friends,
i badly need a sql for the HRMS webadi layout setup.
If you have it, please please post it in the thread..
thank you very much.
Edited by: Lovvyrules on Mar 15, 2012 3:26 PM

10. Creating Layouts and Mappings
10.1. Creating Layouts
A L a pa eate document service that indicates what columns are to be included
in a y the Layout.
Layouts can be seeded with your application. Layouts can be defined to create documents that do not offer
upload, in addition to ones that provide upload capability. UI exists for Layout creation:
1. Select “Define Layout” on t ice home page
10.1.2. Select an Integrator and pre
ayout isrameter given to the Cr
document. The placement of these columns within the document is also indicated b
10.1.
he self serv
ss “Go”. 1 r. The
rovide
upload. Press “Define Layout” to create a new layout, or update, duplicate or delete existing
s.
0.1.3. The following screen shows all of the Layouts that have been defined for an IntegratoReporting column indicates layouts that can only be used to create document that do not p
layout 10.1.4.
at
20 c or less. The only valid characters are: Uppercase 'A'..'Z', '0'..'9' and '_'.
1 u
lumns to include in your Layout. It also determines whether or not
upload purposes. The first selection in the drop
box will allow a Layout to be generated for upload. This Field list contains all of the columns
Enter a Name and Key for your Layout and select a Field List. The Key is a unique code that th is used to reference the Layout when calling the BneApplicationService. It must be a string of haracters
0.1.5. Select a Field List. The Field list selection determines the group of columns available to yowhen determining which co
your Layout can be used to create a document for down
Company Confidential - For internal use only
87
defined for Interfaces created for upload (BNE_INTERFACES_B.UPLOAD_TYPE = 1). All of the other values in the LOV provide lists of columns that can be used to create Layouts that do not offer upload.
required columns (header/Lines).
10.1.6. Enter the location for the
10.1.7. Select the optional fields to be included in the Layout and their location (header/Lines).
Note: UI does not exist to define the column order in the document when a particular Layout is
used. Update BNELAYOUT COLS.SEQUENCE NUM to accomplish this.
Company Confidential - For internal use only
88
.8.2. Constant - Default Type used when the actual value in Default Value is used as the
efault Type when Default Value is an environmental variable. Valid
tsid, sob.periodsetname,
sob.accountedperiodtype, sob.currencycode, sob.latestencumbranceyear, sob.adbflag,
sob.consolidationflag, sob.transactioncalendarid, sob.mandate, sob.maxdate
10.1.8.4. Parameter – Default type when Default Value is the name of a parameter passed to
BneApplicaionService.
10.1.8.5. SQL – Default Type used when a SQL statement is entered into Default Value. Web
A and automatically populate the document with the result. If more than
one value is returned from the query, the first value returned will be used. You may use the
$.userid
10.2. Creating Mappings
A Mapping links Cont o Interface columns. This relationship between the columns in the result
set o
UI exists for Mapping Creation (Note that Mappings for reporting Interfaces are not created through the
Mapping U u
10.2.1. Self- Service home page.
10.2.2.
10.1.8. Enter default values you would like to automatically appear for columns when the document is created. There are five types of defaults you may set: 10.1.8.1. None – Default Type when

Activity creation custom tab

Hello,
My users need to create many activities one after the other.
I would like to create a custom tab where I can propose the activity layout creation including the “Save and New” button. I get to do it BUT I get as well the action bar and the rest of elements on the page…
I’m using the URL :
https://secure-ausomxgfa.crmondemand.com/OnDemand/user/DefTaskNew?OMTGT=TaskEditForm&OMTHD=ActivityNewNav&OMRET0=Homepage
Could anybody tell me how can I modify the URL in order to get just the creation layout?
Cheers
Joann

Hi Dennis,
In the code did u write any conditions depending on the Form Mode..? I suggest u post some of the code snippet that u are using so that we can try to point the error.
Vasu Natari.

How do I make a one row table across several pages?

Hi,
I would like to create a one row two columns table, but to have this table with text flow on several pages.
But I don't know how to do this. If I enter many lines of text, the table will not go on next page, and the extra lines are lost somewhere in the void.
I can do this in NeoOffice though, and in MS Office too.
Thanks

Hello Julien,
yes, I believe I can help your brother with a solution. First set your document to a two column layout in the layout inspector in the "Layout" tab panel. It's good to see the layout guides and hidden signs for better layout creation, so make them visible (menus: "View/Show Layout" and "View/Show Invisibles". To have an appropriate distance between the the rows of text, set the number field "After" at the bottom of the same panel to a value so the distance is ca. 1,5 line spacing or whatever your brother like to have.
Now write the text you want to have in the left column. To place the translation in the right column, choose the menu item "Insert/Column Break". Now the text cursor jumps into the right column and you can write the translation. To type the new text in the left column, choose the menu item "Insert/Layout Break". The text cursor jumps from the end of the right text under the text in the left column, and you can go on.
I know that the use of the menu items is not good for the workflow, so do the following:
Open the Sytem Preferences and choose the panel "Keyboard & Mouse". There click the tab button "Keyboard Shortcuts". Press the "+" button at the bottom of the list field. In the appearing sheed select the Pages app in the pull-down menu "Application:". If you can't find it there, use the last menu item "Other..." to search for it. Now type the EXACT menu item title in the text field "Menu Title:". Here it is "Column Break". Than activate the field "Keyboard Shortcut" and press the key combo you want to have for this function like "optionshiftc" or whatever. Press the "Add" button and repeat this steps for the menu item "Layout Break".
Close the System Preferences and start Pages. Now you can use the key combos for the break insertions.
I hope whith this your brother gets the document he wants to have. But if there are more questions, feel free to post them here.

Flex Mobile List view only displaying correctly in debug build

I've got a horizontal list view that I've created in my app. There is a button that changes it's layout and items between a small thumbnail grid layoutand a larger thumbnail single row layout.
In my debug build, this works just fine every single time. However, once I create a release build and install it, the listview doesn't have anything in it initially. If I press my layout change button, the large images show up, but they are shown vertically instead of horizontally.
And if I hit the button again, I see the smaller images, except that they are in white boxes the size of the larger images.
Here's some screenshots:
Here's my layout creation code:
// setup the scroll view
                scrollView.horizontalAlign="center";
                scrollView.horizontalGap=20;
                scrollView.orientation="columns";
                scrollView.requestedRowCount=1;
                scrollView.verticalAlign="middle";
                scrollView.verticalGap=20;
                // setup the grid view
                gridView.horizontalAlign="center";
                gridView.horizontalGap=20;
                gridView.orientation="columns";
                gridView.requestedRowCount=2;
                gridView.verticalAlign="middle";
                gridView.verticalGap=20;
Here is my layout swap code and my item adding:
var imageClass:Class;
                if(view == 1){
                    listy.layout = gridView;
                    imageClass = getDefinitionByName(getQualifiedClassName(new gridImg())) as Class;
                }else{
                    listy.layout = scrollView;
                    imageClass = getDefinitionByName(getQualifiedClassName(new scrollImg())) as Class;
                var x:ArrayList = new ArrayList();
                var im:BitmapAsset;
                im = new imageClass() as BitmapAsset;
                var i:BitmapImage = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                i = new BitmapImage();
                i.source = im;
                x.addItem(i);
                listy.dataProvider = x;
And in case it's relevant, here's my embedded image code:
[Embed(source="assets/logo.png")]
            [Bindable]
            public var gridImg:Class;
            [Embed(source="assets/logo2.png")]
            [Bindable]
            public var scrollImg:Class;
Any help would be appreciated.

The red arrow shows the floating bar in Reader X, outside the visible area of the screen

Web ADI- Modification of FA Additions standard template problem

Dear Gurus,
We are on Oracle EBS 11.5.10.2. DB 10g On Oracle Enterprise Linux 5.8 BOX..
I have modified the custom template of FA Addition.. Here is what I needed and what I have done..
1. I excluded the mandatory Clearing Account Field from the template.
2. I enabled Attribute 1 to Attribute 6 columns for display.
3. Enabled those fields for mapping as well.
4. Created a new template.
All these I have done is by adjusting back end information.
Problem:
I am getting the attributes in layout creation page there I can select them for showing it on web adi spread sheet lines
but when I create the document the Attribute Columns does not appear in the sheet.
I have bounced the machine after doing the changes Still no result.
Technical Changes I made for doing this :
update bne_interface_cols_b x
set x.DISPLAY_FLAG = 'Y'
where x.INTERFACE_COL_NAME in ('ATTRIBUTE1','ATTRIBUTE2','ATTRIBUTE3','ATTRIBUTE4','ATTRIBUTE5','ATTRIBUTE6')
and x.INTERFACE_CODE = 'FA_MASS_ADD_INTERFACE'
update bne_interface_cols_b x
set x.MAPPING_ENABLED_FLAG = 'Y'
where x.INTERFACE_COL_NAME in ('ATTRIBUTE1','ATTRIBUTE2','ATTRIBUTE3','ATTRIBUTE4','ATTRIBUTE5','ATTRIBUTE6')
and x.INTERFACE_CODE = 'FA_MASS_ADD_INTERFACE'
Please let me know what I need to do for making these visible.
Regards,
Rubayat Newaz

Leo thanks your reply was really helpful.
here is what I did,
update bne_interface_cols_b
set val_type = null, group_name =null
where application_id = 140
and interface_code = 'FA_MASS_ADD_INTERFACE'
and interface_col_name in ('ATTRIBUTE2','ATTRIBUTE4','ATTRIBUTE5','ATTRIBUTE6','ATTRIBUTE7')
Walla it is showing in web adi. I am able to upload data..
but I am facing a new kind of problem.. When I upload data using pre validate
data is uploaded but I get this warning
No concatenated descriptive flexfield value to validate.
how to get rid of it ?
Regards,
Rubayat

Insert webpart zone in tabs in webpart page using sharepoint designer 2010

Hi All,
I am facing a problem , its looks very easy but i couldn't found any clue about this.
i have created a webpart page, after this i have enable to view quick launch in this webpart page. then i have create a some tabs with reference to this site
https://jqueryui.com/tabs/. but the problem is when i go to view my page in browser it take same height which is same as quick launch height. and in my diff scenario i have created tab using content editor web part then its working fine. but
i need to create web part zone in these tabs that why i m not able to do this using content editor. so i am using designer only.
i guess i am writing content in wrong content place holder or etc. please help me ...i have already lost my 2 days for this.
FYI, please find the code which i used in webpart page using share point desinger.
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
<SharePoint:ListItemProperty Property="BaseName" maxlength="40" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea" runat="server">
<WebPartPages:WebPartZone runat="server" title="loc:TitleBar" id="TitleBar" AllowLayoutChange="false" AllowPersonalization="false"><ZoneTemplate>
<WebPartPages:TitleBarWebPart runat="server" AllowEdit="True" AllowConnect="True" ConnectionID="00000000-0000-0000-0000-000000000000" Title="Web Part Page Title Bar" IsIncluded="True" Dir="Default"
IsVisible="True" AllowMinimize="False" ExportControlledProperties="True" ZoneID="TitleBar" ID="g_14e08bcc_e32c_4759_80dc_34e124e6212f" HeaderTitle="abc1" AllowClose="False" FrameState="Normal"
ExportMode="All" AllowRemove="False" AllowHide="True" SuppressWebPartChrome="False" DetailLink="" ChromeType="None" HelpLink="" MissingAssembly="Cannot import this Web Part." PartImageSmall=""
HelpMode="Modeless" FrameType="None" AllowZoneChange="True" PartOrder="2" Description="" PartImageLarge="" IsIncludedFilter="" __MarkupType="vsattributemarkup" __WebPartId="{14E08BCC-E32C-4759-80DC-34E124E6212F}"
WebPart="true" Height="" Width=""></WebPartPages:TitleBarWebPart>
</ZoneTemplate></WebPartPages:WebPartZone>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleAreaClass" runat="server">
<style type="text/css">
Div.ms-titleareaframe {
height: 100%;
.ms-pagetitleareaframe table {
background: none;
</style>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderAdditionalPageHead" runat="server">
<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="CollaborationServer" content="SharePoint Team Web Site" />
<script type="text/javascript">
// <![CDATA[
var navBarHelpOverrideKey = "WSSEndUser";
// ]]>
</script>
<%--<SharePoint:UIVersionedContent ID="WebPartPageHideQLStyles" UIVersion="4" runat="server">
<ContentTemplate>
<style type="text/css">
body #s4-leftpanel {
display:none;
.s4-ca {
margin-
</style>
</ContentTemplate>
</SharePoint:UIVersionedContent>--%></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderSearchArea" runat="server">
<SharePoint:DelegateControl runat="server"
ControlId="SmallSearchInputBox"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderLeftActions" runat="server">
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageDescription" runat="server">
<SharePoint:ProjectProperty Property="Description" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyRightMargin" runat="server">
<div height="100%" class="ms-pagemargin"><img src="/_layouts/images/blank.gif" width="10" height="1" alt="" /></div>
</asp:Content>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server"></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderNavSpacer" runat="server"></asp:Content>--%>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderLeftNavBar" runat="server"></asp:Content>--%>
<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
<html lang="en">
<head>
<meta name="WebPartPageExpansion" content="full" />
<meta charset="utf-8">
<title>jQuery UI Tabs - Default functionality</title>
<link rel="stylesheet" href="http://code.jquery.com/ui/1.10.3/themes/smoothness/jquery-ui.css">
<script src="http://code.jquery.com/jquery-1.9.1.js"></script>
<script src="http://code.jquery.com/ui/1.10.3/jquery-ui.js"></script>
<link rel="stylesheet" href="/resources/demos/style.css"><script>
$(function() {
$( "#tabs" ).tabs();
</script></head><body><div id="tabs">
<ul>
<li><a href="#tabs-1">Bangalore 1</a></li>
<li><a href="#tabs-2">Bangalore 2</a></li>
<li><a href="#tabs-3">Bangalore</a></li>
<li><a href="#tabs-4">Chennai 4</a></li>
</ul>
<table cellpadding="4" cellspacing="0" border="0" width="100%">
<tr>
<td><div id="tabs-1"> <%--id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" width="100%"> --%><WebPartPages:WebPartZone id="g_6958510ECBD74ABD8AA9F8E26B747B27"
runat="server" title="Zone 13"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone><WebPartPages:WebPartZone id="g_FA3DDD09582A4C589559877B7169340D" runat="server" title="Zone 14"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone></div></td>
</tr>
<tr><td><div id="tabs-2">
<WebPartPages:WebPartZone id="g_73928F4B9F484EE392EBCBA7D5ACF9FE" runat="server" title="Zone 1"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
<WebPartPages:WebPartZone id="g_77B2328C81874FFB8034559174B450BF" runat="server" title="Zone 12"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div></td></tr>
Please help..if u need any other detail i ll provide you.. plz check the image after doing this the tabs take full range as quick launch.
Thanks
Vivek Singh Tomar

You do not need to work on visual studio, you can create page layout form web and sharepoint designer. Page layouts are only available on publishing sites, you can modify page layout using sharepoint designer, add your required html and web part zones.
Check below few links for reference:
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
http://www.mssharepointtips.com/tip.asp?id=1125
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/10/stage-7-upload-page-layouts-and-create-new-pages-in-a-publishing-site.aspx
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
Page layouts creation and editing is almost same in MOSS 2007, SharePoint 2010 and SharePoint 2013. If you are creating page layout using web then you can easily modify it using SharePoint designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

FBL3N-Layout Creation

Similar Messages

Maybe you are looking for