I can't get photomerge panoramic feature to work in Elements 13?

I can select the photos I wish to merge, it goes through the process of aligning the photos but then fails to output a panoramic image. No failure message or any other reason given.
Its as if the program just crashes. Any ideas? Am I doing something wrong as I've used this function in Elements 10 without any issues, is 13 that much different??

After un-installing and re-installing Photoshop TWICE it finally started to work, so it must of been a installation issue. Hope this helps anyone in the future.

Similar Messages

How can I get all iCloud features to work on Android and OSX 10.8 simultaneously?

Hi, I have recently switch to Android and I wanted to know if I can still use all the iCloud features that i had before on my ios device.
I have a Mac Mini running Mountain Lion which I'm pretty happy because I works perfectly with iCloud.
So i wanted to know how can i

snozdop wrote:
> They are not free, but they are supported.
Not by Apple... and that only helps for contacts or calendars - not "all the iCloud features that [he] had before on [his] ios device."
Thats why I specified for Contacts and for Calendars.
They are supported by the app develpor.
Do you have a question?

How can I get the dictionary feature to work with firefox?

I haven't been able to get the dictionary to pop up using the three-finger double-tap in Firefox. Is there is a fix for this?

Download and install magicPrefs (for free) and do this:
My guess is that there are problems with gestures yet to be worked out. One problem I see is that users don't wait long enough, or try hard enough (ha!) when using them. My guess is that when the machine is busy (indexing, rendering, etc.) that the gestures get hosed, but I am not a developer...so just a guess

I can't get the Camera feature to work on the new itouch?

I only see a black screen when I start the Camera App?

Turn it on in Settings:
Settings>General>Keyboard>Split Keyboard:ON
Open up a text app such as notes and tap the screen to begin writing. The keyboard will pop up.At the very bottom right-corner will be a keyboard icon. Tap-drag (tap and *hold* the icon, then drag it up), the icon up and the keyboard should split as you drag upwards.
Another way to split the keyboard is to use two fingers, tap & hold each side of the keyboard to split it and spread the keyboard apart.

I can not get the email attachment to work in elements 9.0?

I have spent hours on the phone
with Adobe to no avail. One tech had me open Elements as an
administrator and this seemed to work for one day. Any
ideas?

I have spent hours on the phone
with Adobe to no avail. One tech had me open Elements as an
administrator and this seemed to work for one day. Any
ideas?

I am trying to create a panorama, when I enter File New I don't get the Photomerge Panorama option, the only options that appear are Blank file and File from clipboard. How do I get photomerge panorama

I am trying to create a panorama. When I enter FILE > NEW > the Photomere panorama option does not appear. the only options are Blank file and file from clipboard. This is in Elements 11 on Windows 8.1 OS. How do I get Photomerge Panorama to appear.

Since PSE11, you access the photomerge option in the 'Enhance' menu, last option. Or you can use the organizer (menu Edit / Photomerge).

Can I get a panoramic camera on my iphone4?

Can I get a panoramic camera for my iphone 4?

Look in the App store for an app. There are a number that offer this functionality.

Can't use the panorama feature

Hi,
I just acquired PS 12 & wanted to build a panorama from a suite of photos.
I loaded the photos in the Expert Edit mode and then tried to open a new file of the panorama type, as shown in the video tutorial. But the only choice I have is "Empty File".
What is it I do wrong ?
Thanks for your help,
JayPeeM

Thank you: it works
Cheers,
Jean-Paul
Le 09/03/2014 22:31, nealeh a écrit :
>
Re: Can't use the panorama feature
created by nealeh <http://forums.adobe.com/people/nealeh> in
/Photoshop Elements/ - View the full discussion
<http://forums.adobe.com/message/6193656#6193656

Why can't I get open type features to work properly with an open type font on InDesign CS5.5?

I installed a very complete set of styles of an opentype font with Font Book – Mac OS X 10.9.4 – but when I tried to format a sample text on InDesign CS5.5 I noticed that I could not use the opentype features on the Open Type menu as I usually do.
Could anyone help me, please?

It's ffScala Sans, but has separate files for small caps, figures, etc.
I was trying to use small caps, lining figures and superscripts when I
noticed none of the OT features are available.
2014-07-30 21:56 GMT+01:00 Miguel Sousa <[email protected]>:
Why can't I get open type features to work properly with an open type
font on InDesign CS5.5? created by Miguel Sousa
<https://forums.adobe.com/people/MiguelSousa> in Adobe Type - View the
full discussion <https://forums.adobe.com/message/6598614#6598614>

How can I get my iPhone 5s to work in my 2015 outback

How can I get my iPhone 5s to work in my 2015 outback?

I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?

Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it.

I have an iPhone 4S and I cannot get the iMessage feature to work. I've done the fix that was online and it still won't work.

I need help getting the iMessage feature to work. I've done the fix that is shown online several times and still cannot get it to work. Are there any other suggestions out there to fix this problem?

HI,
What was "the Fix" ?
Where was it On Line ?
So your iPhone is on a Wifi network ?
You have gone to Settings > Messages and Enabled Messages.
You cannot then send iMessages from your iPhone Number ?
You should be able to sent to other iOS devices that are using other iPhone Numbers or Apple IDs or to Macs that are running Messages with the iMessages account enabled and those may also be using iPhone Numbers or Apple IDs depending how they were set up.
On the iPhone in Settings > Messages you can then add an Apple ID
You can then chose to Send from the Apple ID or iPhone number as the Start from option.
Adding the Apple ID links the Apple ID and iPhone Number and if you have a Mac, and are running Messages with the same ID, they will sync (Display on all Devices) all the subsequent iMessages you receive.
9:27 pm Thursday; December 26, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get iCloud to accept my working Apple ID and password

My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

I can't get photomerge panoramic feature to work in Elements 13?

Similar Messages

Maybe you are looking for