I can't sincronize my IPAD 2 with i tunes to register may device, I can't sincronize my IPAD 2 with i tunes to register may device
I can't iniciate my new Ipad 2. My pc don't detected my Ipad. The Apple Mobile device USB driver is not instaled
What can I do?
Unless there is an app that supports the GPS receiver, it will not pair/work with the iPad.
The GNS 5870 MFI is equipped with both Apple and NMEA protocol. The GPS receiver detects which device it should connect and automatically use the requested protocol. Additional the receiver is compatible with all current GPS software apps. With appropriate software, the GPS receiver can not only navigate but also utilize for logging, for example to document motorcycle excursions.
Above from:
http://www.gns-gmbh.com/index.php?id=194&L=1
Also see this YouTube Video:
http://www.gns-gmbh.com/index.php?id=194&L=1
GNS 5870 With Ipad
Similar Messages
-
At home I have a HP PC, netbook and Sony laptop with no connection issues. Last year I bought an iPad 1 for my wife. This year I bought an iPad 2 for myself. However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet. if the iPad1 is being used then the iPad2 cannot connect. I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday. Right now the only iPad that shows any connection is the iPad1. The iPad2 does not see the home network or any other outside network. Any suggestions or ideas on how to resolve this? It is odd the network issues only affect the iPad's.
@dananova,
It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses.
Check the router manual on how to change the dynamic IP range of your router. If you don't have a manual, you can go to Belkin's website and download it.
To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network. DHCP should be highlighted. Write down the all the settings on the screen. Next tap the Static button. Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address. Enter a new 3 digit number in this spot. Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255. I would suggest a range of 240 to 250, unless the original IP range falls near this range. Also make sure you use a different 3 digits for each device you set to use a static IP address. -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg -
My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhones and it cuts in and out.. Drops from 3 wifi bars to 1
I am having the same problem with brand new Ipad Mini at my house.
It connects to the WiFi fine - but will not pull an IP address in DHCP mode, or if I set all the IP info statically - it still will not get any network access.
This doesn't look like a WiFi issue, as it does connect and is seen by the WiFi Access Point. All the normal WiFi fix stuff doesn't help.
- Using a Dlink DAP-2553 which is less than 2 months old.
Other devices connect fine, including Ipad 2.
This same Mini worked fine at another house and also connected to a mobile hotspot fine....so seems to be some weird IP issue with maybe this Access Point or maybe the older Router that I have (older Netgear)?
I am actually a network engineer and still have not been able to find a solution. Both the Ipad Mini and the Dlink WAP have the latest firmware loaded.
Wondering if anyone has found a solution to this problem. -
I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandichicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?
Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.
-
I tried to change the e-mail associated with my apple account because my school was closing and I knew I would no longer have accss to that e-mail account, however now all 3 of my devices ( 2 ipads & 1 iphone are screwed up as far as the e-mail accounts associated with each device and the passwords. I have tried all the on-line support/suggestions and took my devices to a local Apple store and no one/nothing helps.
Does anyone have a solution? I can purchase new apps but I cannot update any of the apps I have to any of my devices.
<Email Edited By Host>Unfortunately, it says I can't delete anything without the missing password.
-
My teenage daughter and i share an apple id on both of our iphones (2 phones both are 5s) . She now has an ipad with a her own apple id. How can we change the apple id on her phone so that is the same as the ipad and not loose any contacts or songs?
Did you take a look at the new feature Apple - iOS 8 - Family Sharing ?
Apple - iCloud - Family Sharing
Up to now, songs bought from iTunes could only be played by the Apple ID that has been used to buy them.
If you set up Family Sharing, your daughter can also play your songs and use the same contact info as before.
If you don't want to do that, sync the contact info to the address book on your computer, and sync the info back, using iTunes:
Sync your iPhone, iPad and iPod with iTunes using USB
If the iPad already has her Apple ID and contact info on it, restore the phone from the latest iPad backup. -
Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1good thing i havent updated mine yet..
-
I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?
Highlight the movie, go to iTunes menu ADVANCED and select create iPad and AppleTV version.
-
i have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks
You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).
-
can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?
All I can say is that I REALLY like my Touch 4th gen because I have all sorts of capabilities in a small form: e-mail, web browsing, news, weather, books, magazines, etc. etc. Plus lots and lots of apps out there, including so many free ones. I use the Cloud a lot so it's great to have everything sync'd to my MacBookPro (e-mail, Evernote, Pocket, etc.)
It would be easier, though, to do some of this, especially magazines, on the iPad mini, but, again, I love the small size of the Touch.
As for the 5th gen instead of the 4th, the fifth has Siri and the 3D feature in maps, which are great. And I'm sure it's a lot faster in iOS 6 than the 4th gen. And cool colors!
Don't know if this helps . . . -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?
What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.
Maybe you are looking for
-
I moved my itunes library, now I have two of every song..
I ran out of room on my laptop so I got a new external hard drive. Moved my entire itunes library to the new drive, and now I have a two of every song and video, one of which that when selected an error pops up reading "the song ... could not be used
-
Dreamweaver Trial Version is not opening
I was installing the trial version of Adobe Dreamweaver. Installation was no problem but now when i want to open the program its not opening. There comes: Dreamweaver can not open because of a problem: Process: Dreamweaver [1275] Path:
-
Issue Tracker App Demo-Email Notification
In working through the app I've stumbled on page 74, the email notification trigger. After entering and pressing "finish", I receive: The table operation was not successful for the following reason: ERROR at line 26: PL/SQL: Statement ignored The fol
-
I have a file structure like Header-Transaction Records(100K)-Trailer with Transaction Records of 100k. I want to process the this file through file-xi-file scenario. If I got to write a operating sytstem command/script to split the file in chunks ,
-
Urgent : Mystery Calls using Skype
Hi, As i would like to use Skype to make mystery calls to test competence of my call centre support, I have a few questions: Example: I call using Skype from Singapore to China Call Centre, what is the phone number that will appear at the receiver's