I can't stop shutdown normal
hi expert,
i'm running the command shutdown, but it don't finish.
sqlplus SYS/password#@TMPDB1 as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Aug 10 14:08:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> shutdown normal;
^Ci'm waiting until 10 minute, but without any success.
In alert log i'm finding this problem:
ARC0: Archiving not possible: No primary destinations
ARC0: Failed to archive thread 1 sequence 14568 (4)
Tue Aug 10 14:23:40 2010
ARC1: Archiving not possible: No primary destinations
ARC1: Failed to archive thread 1 sequence 14568 (4)
Tue Aug 10 14:23:40 2010
ARC0: Archiving not possible: No primary destinations
ARC0: Failed to archive thread 1 sequence 14568 (4)How i can stop the database? or stop the shutdown?
If I open another shel I have this error.
$ export ORACLE_SID=TMPDB1
$ sqlplus "/ as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Aug 10 14:27:03 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> select name from v$database;
select name from v$database
ERROR at line 1:
ORA-01034: ORACLE not availablemany thanks as usual,
Lain
Edited by: Lain on 10-ago-2010 14.28
Chinar, ar u sure?
in this moment I've 36 active pid on my unix system (sun os)
thanks too you,
Cheers
$ ps -ef | grep TMPDB1
oracle 3091 1 0 Aug 05 ? 0:01 ora_d000_TMPDB1
oracle 3080 1 0 Aug 05 ? 0:41 ora_smon_TMPDB1
oracle 3085 1 0 Aug 05 ? 5:06 ora_cjq0_TMPDB1
oracle 3053 1 0 Aug 05 ? 14:34 ora_pmon_TMPDB1
oracle 26085 1 0 Aug 06 ? 0:12 ora_j008_TMPDB1
oracle 3074 1 0 Aug 05 ? 0:41 ora_dbw7_TMPDB1
oracle 3082 1 0 Aug 05 ? 0:00 ora_reco_TMPDB1
oracle 3065 1 0 Aug 05 ? 0:37 ora_dbw3_TMPDB1
oracle 3067 1 0 Aug 05 ? 0:56 ora_dbw4_TMPDB1
oracle 3061 1 0 Aug 05 ? 1:12 ora_dbw1_TMPDB1
oracle 3072 1 0 Aug 05 ? 0:37 ora_dbw6_TMPDB1
oracle 3132 1 0 Aug 05 ? 0:44 /opt/oracle/product/10.2.0/ORA/bin/tnslsnr LISTENER_TMPDB1 -inherit
oracle 3055 1 0 Aug 05 ? 0:19 ora_psp0_TMPDB1
oracle 23780 1 0 Aug 06 ? 0:11 ora_j004_TMPDB1
oracle 16381 14888 0 14:40:59 pts/3 0:00 grep -i dwh
oracle 3057 1 0 Aug 05 ? 0:22 ora_mman_TMPDB1
oracle 3063 1 0 Aug 05 ? 1:41 ora_dbw2_TMPDB1
oracle 3078 1 0 Aug 05 ? 5:59 ora_ckpt_TMPDB1
oracle 3113 1 0 Aug 05 ? 893:35 ora_arc1_TMPDB1
oracle 20780 1 0 Aug 06 ? 4:56 oracleTMPDB1 (LOCAL=NO)
oracle 3076 1 0 Aug 05 ? 24:23 ora_lgwr_TMPDB1
oracle 23450 1 0 Aug 06 ? 0:28 ora_j003_TMPDB1
oracle 3059 1 0 Aug 05 ? 0:52 ora_dbw0_TMPDB1
oracle 3111 1 0 Aug 05 ? 1203:53 ora_arc0_TMPDB1
oracle 3093 1 0 Aug 05 ? 0:01 ora_s000_TMPDB1
oracle 3069 1 0 Aug 05 ? 0:40 ora_dbw5_TMPDB1
oracle 24945 1 0 Aug 06 ? 0:11 ora_j007_TMPDB1
oracle 26087 1 0 Aug 06 ? 0:11 ora_j009_TMPDB1
oracle 14899 1 0 14:09:21 ? 0:01 ora_emn0_TMPDB1
oracle 23782 1 0 Aug 06 ? 0:11 ora_j005_TMPDB1
oracle 22527 1 0 Aug 06 ? 0:11 ora_j002_TMPDB1
oracle 24943 1 0 Aug 06 ? 0:11 ora_j006_TMPDB1
oracle 14859 14772 0 14:08:52 pts/2 0:00 sqlplus SYS/password@TMPDB1 as sysdba
oracle 21724 1 0 Aug 06 ? 0:30 ora_j001_TMPDB1
oracle 21136 1 0 Aug 06 ? 0:30 ora_j000_TMPDB1
oracle 14861 1 0 14:08:52 ? 0:01 oracleTMPDB1 (LOCAL=NO)Edited by: Lain on 10-ago-2010 14.43
Similar Messages
-
Can't stop/start bi server normally
dear all,
After running some pressure tests with OATS, I find that can't stop/start bi server normally:(.
[oracle@bieprd01 u01]$ opmnctl stopproc ias-component=coreapplication_obis1
opmnctl stopproc: stopping opmn managed processes...
================================================================================
opmn id=bieprd01:9501
1 of 1 processes stopped.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obis1/OracleBIServerComponent/coreapplication_obis1/
Error
--> Process (index=1,uid=1119104799,pid=7805)
time out while waiting for a managed process to stop
second stop attempted
Log:
/u01/biee01/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1/console~coreapplication_obis1~1.log
console~coreapplication_obis1~1.log says:
12/08/23 15:44:20 Start process
Oracle BI Server starting...
nqsserver: Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.0955.000.
Invalid error message file: /u01/biee01/Oracle_BI1/bifoundation/server/locale/l_zh-cn/SQServer.xml
Invalid error message file: /u01/biee01/Oracle_BI1/bifoundation/server/locale/l_zh-cn/SQServer.xml
and the opmn log says:
[2012-08-23T15:44:25][opmn][TRACE:1][][OPMN]Ping failed in Ready callback for proc:1119104799
[2012-08-23T15:44:27][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1119104799:7805)
[2012-08-23T15:44:27][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 65 Completed. Command: /start?ias-component=coreapplication_obis1
[2012-08-23T16:02:45][opmn][TRACE:1][667][OPMN][code:pm-requests]Request a1 Started. Command: /stop?ias-component=coreapplication_obis1
[2012-08-23T16:02:45][opmn][TRACE:1][663][OPMN][code:pm-process]Stopping Process: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1119104799:7805)
[2012-08-23T16:04:47][opmn][TRACE:1][663][OPMN][code:pm-process]Stopping Process: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1119104799:7805)
[2012-08-23T16:04:47][opmn][TRACE:1][][OPMN][code:libopmncustom]Forcefully Terminating Process: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1119104799:7805)
[2012-08-23T16:04:49][opmn][TRACE:1][668][OPMN][code:pm-requests]Request a1 Completed. Command: /stop?ias-component=coreapplication_obis1
[2012-08-23T16:04:49][opmn][TRACE:1][666][OPMN][code:pm-process]Process Stopped: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1119104799:7805)
nqserver says:
[2012-08-23T08:03:48.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004lyc76^1QEoI15zv_AiW0001tx000000] [tid: 41ff2940] [nQSError: 46066] Operation cancelled. [[
<<68196231>> DbGateway Exchange
[2012-08-23T08:03:48.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004lyc76^1QEoI15zv_AiW0001tx000000] [tid: 41ff2940] [nQSError: 46066] Operation cancelled. [[
<<68196289>> DbGateway Exchange
[2012-08-23T08:03:48.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: c320190d2d41f712:-2548b04a:139524c0eec:-8000-0000000000001b8b] [tid: e59ca940] [nQSError: 46066] Operation cancelled.
I can't find out what that's caused:( and need your help!
/michaelHi minutemantechs - welcome to the forum!
This is not a limitation imposed by iMovie. Check your external drive's format - it must be Mac OS Extended. Yours is probably formatted for PCs. Note that re-formatting will clear everything stored on the drive. re-format via Applications>Utilities>Disk Utility. -
After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.
Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy -
My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself? How can I stop the "thief"?
I have this exact same problem. One solution is having your friends change their fake aliases on Facebook to their real bloody names, but I realise this is no easy fix.
-
I don't want Firefox to recover pages after a sudden power outage causes the computer to shutdown - how can I stop it?
See:
*http://kb.mozillazine.org/Session_Restore
*https://support.mozilla.org/kb/Session+Restore -
Before I shut down my computer, I quit all my open applications. This makes startup cleaner. But now, upon startup, Firefox 23 automatically opens...not Safari, not Mail, just new Firefox 23. This would seem to be the new default. Can I stop this behavior?
See:
*https://discussions.apple.com/thread/3193281
"Reopen windows when logging back in"
* http://www.apple.com/findouthow/mac/#tutorial=startup - Open Applications Automatically on Startup
* Control-click on the Firefox Dock icon and uncheck 'Open at Login'
* Click Accounts (in the System row of the System Preferences window)
** Click the Login Items tab
** Click on Firefox in the list
** Click the Minus (-) button -
Hi,
While stopping an Oracle database I have used "SHUTDOWN" command, to stop the Oracle database normally. But there are already some existing connections to the database. After shutdown normal Oracle waits for these connections to be disconnected themself.
Suppose these connections do not gets disconnected themself. Then Oracle won't allow you to connect to database again to kill those database sessions, and we are stuck. Though this can be managed by rebooting the database machine. But inspite of rebooting the machine, is there any other way as well to handle this scenario?
Thanks in advance.The suggestion had been "+You can grep database connections from OS and kill them individually+". This works on Unix/Linux where separate server processes service each user. On Windows it is a single multi-threaded process.
The suggestion had been to kill individual processes -- which you can't do on Windows.
What you did was to kill the Oracle database instance process.
+If you have compared Oracle on Unix/Linux with Windows you'd know that the reference is to Unix/Linux not Windows. (and that is not because "Oracle is different on Windows" but because the architecture on Windows has to be multi-threaded rather than multi-processing if different database sessions are to access a shared SGA.+ But I digress).
So, on Unix/Linux, it is easier to identify and kill individual processes.
(+If you know how to map database sessions to oracle PIDs to individual threads in the single Oracle.exe process and then how to use orakill, you'd be able to do something similar on Windows.+ But, again, I digress).
If you want a method to handle some (the DBA ??) inadvertently issuing SHUTDOWN instead of SHUTDOWN IMMEDIATE, think of
a. Configuring your Service Shutdown to use SHUTDOWN IMMEDIATE and making it mandatory for all DBAs/SysAdmins to use Service Shutdown instead of SQLPlus SHUTDOWN
b. Making it mandatory for all DBAs to use SQLPlus SHUTDOWN IMMEDIATE or suffer a reprimand for using SHUTDOWN
c. Write an ON SHUTDOWN database trigger that
i loops through all database sessions
ii excludes the background sessions and the session that issues the shutdown
iii issues an ALTER SYSTEM KILL SESSION for the remaining sesssions
Hemant K Chitale
http://hemantoracledba.blogspot.com -
RE: Can I stop the "Attempting to Rebind" after EnvMgr goesAWOL ...
You might want to export the Environment definition and
use it to restore the Environment when you restart( after the
environment manager dies ungracefully ).
Ajith Kallambella. M
Forte Systems Engineer,
International Business Corporation
-----Original Message-----
From: Haben, Dirk [mailto:[email protected]]
Sent: Tuesday, December 29, 1998 1:47 AM
To: 'Soapbox Forte Users'
Subject: Can I stop the "Attempting to Rebind" after EnvMgr goes AWOL
Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
We usually do a shutdown on the topmost level using escript. I assume that
will shutdown all installed partitions and the environment. Or did I get it
wrong that we have to shutdown application first that the environment?
Regards,
Peter Sham.
-----Original Message-----
From: Daniel Nguyen [SMTP:[email protected]]
Sent: Tuesday, January 05, 1999 6:38 PM
To: Peter Sham (HTHK - Assistant Manager - Software Development,
IITB)
Cc: [email protected]
Subject: Re: Can I stop the "Attempting to Rebind" after
EnvMgr goes AWOL ...
Hi,
Sorry, I don't have that kind of problem. Are you doing your
shutdown
on the application level from EConsole ? Do you shutdown your
application
before shutting down the environment ? Do you have the same symptom
after
having rebuilt your environment repository ?
The best I could say is still to make an export of the environment
on
your exploitation procedures (every day for instance) and to restart
your environment from this export. I presume that you still have
referenced
links in your environment repository which are not available. Until
you
make a clean Environement repository from an edf file you may have
the
problem.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Peter Sham (HTHK - Assistant Manager - Software Development, IITB)
wrote:
>
> Hi,
>
> The problem that I described happened not only after crashes but
also after
> clean shutdown. Observe your <hostname>.log and you will find
that each
> time after startup, there is a large chunk of message saying
"rebinding".
> When system crashes, this rebinding will disturb normally
operation too.
>
> Regards,
> Peter Sham.
>
> -----Original Message-----
> From: Daniel Nguyen [SMTP:[email protected]]
> Sent: Monday, January 04, 1999 8:58 PM
> To: Haben, Dirk; [email protected]
> Subject: Re: Can I stop the "Attempting to Rebind"
after
> EnvMgr goes AWOL ...
>
> Hi,
>
> The restart of your application is not exactly the problem
> the rebind is linked to the restart of your environment.
> If you want your application to restart, you should use
the
> autostart. Problem : if you are using load balancing, you
should
> restart
> as Degraded (with only one replicate). But, the main
problem seams
> to
> be your application. The partitions should not fall. You
may have
> some
> classes or attributes which are used but not instanciated.
This
> should
> causes a segmentation error and a crash of your partition.
This
> symptom
> is not the same if you are running on interpreted mode
(you will
> only
> receive a NIL object Usage Exception). Be aware that, on
the
> developement
> workshop, Arrays are instanciated automatically. This is
not true if
> you
> are distributed.
> On the application I worked on, this caused 150 autostarts
a day
> before
> resolution and an increase of the environment repository
up to 6 Mo.
> To avoid the crash of your environment, you should use -fm
to
> reserve
> enough memory (we used 60 Mo of memory for a standard
environment).
> You should not use the same environement for production
and
> compilation
> which needs much more memory if you use auto-compile, or
make your
> compilations with FCompile directly on the compilation
server.
> Normally the application (if it's already startded) should
not need
> the
> environment. You can stop the environment, your
application should
> still
> run, but new clients should not be able to attach to
partitions. It
> is
> a way to be sure that no new clients are connecting to the
> application,
> if you can be sure that all the proxies are already
resolved.
> The rebind is made to reconnect the environment to clients
and
> partitions,
> but I didn't see a real difference on instruments using
rebind or
> not.
> Rebind success is when your partitions or clients are
still there
> (with
> the same UUID). On a shutdown, your server partitions are
rebuilt,
> so
> it should not be successfull. Same case if the clients
stop their
> client partition.
>
> Hope this helps,
>
> Daniel Nguyen
> Freelance Forte Consultant
>
> Haben, Dirk wrote:
> >
> > I agree with Peter.
> >
> > My reason to stop the rebind in the first place is to be
able to
> have my
> > weekends etc to myself - so the application must restart
without
> manual
> > interference!
> >
> > Has anyone ever seen a rebind succeed? Was it worth it?
> >
> > Cheers,
> > Dirk
> >
> > -----Original Message-----
> > From: Peter Sham (HTHK - Assistant Manager - Software
Development,
> IITB)
> > [mailto:[email protected]]
> > Sent: Monday, 4 January 1999 11:09
> > To: Kallambella, Ajith; 'Haben, Dirk'
> > Cc: 'Forte'
> > Subject: RE: Can I stop the "Attempting to Rebind" after
EnvMgr
> goes
> > AWOL ...
> >
> > Hi,
> >
> > By restoring the environment from export will clean up
and skip
> any
> > "rebind". However, I would query that ... Is it
feasible in an
> production
> > environment. When the system is down, we have to put it
back
> asap.
> > Restoring the environment takes time and, I would say,
quite
> risky. Any
> > installation to the production has to be accompanied by
an export,
> > otherwise, after re-installing the export, the
deployment would be
> lost.
> >
> > I just wonder if there is a better way.
> >
> > Regards,
> > Peter Sham.
> > -----Original Message-----
> > From: Kallambella, Ajith
> [SMTP:[email protected]]
> > Sent: Tuesday, December 29, 1998 10:11 PM
> > To: 'Haben, Dirk'
> > Cc: 'Forte'
> > Subject: RE: Can I stop the "Attempting
to Rebind"
> after
> > EnvMgr goes AWOL ...
> >
> > You might want to export the Environment
definition and
> > use it to restore the Environment when you
restart( after
> the
> > environment manager dies ungracefully ).
> >
> > Ajith Kallambella. M
> > Forte Systems Engineer,
> > International Business Corporation
> >
> > -----Original Message-----
> > From: Haben, Dirk
[mailto:[email protected]]
> > Sent: Tuesday, December 29, 1998 1:47 AM
> > To: 'Soapbox Forte Users'
> > Subject: Can I stop the "Attempting to Rebind"
after
> EnvMgr goes
> > AWOL
> > ...
> >
> > Hi All.
> >
> > In the last few weeks I have had the Environment
Manager
> (for
> > development)
> > go AWOL in as many weeks.
> > During a restart - after cleaning up (stop/id)
all other
> Forte
> > processes - I
> > run into virtual memory limitations - and the
restart
> fails.
> >
> > A larger virtual memory quota (doubling the
pagefile quota
> actually)
> > did the
> > trick.
> > However the quota is too large to be kept and I
have
> reverted to
> > 400,000
> > blocks (OpenVMS talk for about 200MB).
> >
> > The problem appears to be caused by all this
attempted
> rebinding.
> > "With Forte Release 3, this rebinding process is
> asynchronous" (see
> > TN11537).
> >
> > Q: Can I disable the attempted rebind so to
reduce memory
> needs on a
> > restart
> > after the EnvMgr goes AWOL?
> >
> > Supplementary Q: If so - How?
> >
> > TIA and Seasons Greetings,
> > Dirk
> >
> > -
> > To unsubscribe, email '[email protected]'
with
> > 'unsubscribe forte-users' as the body of the
message.
> > Searchable thread archive
> > <URL:http://pinehurst.sageit.com/listarchive/>
> > -
> > To unsubscribe, email '[email protected]'
with
> > 'unsubscribe forte-users' as the body of the
message.
> > Searchable thread archive
> > <URL:http://pinehurst.sageit.com/listarchive/>
> > -
> > To unsubscribe, email '[email protected]' with
> > 'unsubscribe forte-users' as the body of the message.
> > Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Funny situation. We have a development database that goes down every night for a cold backup (it is a BCV split, so downtime is minimal). Anyway, one of the DBA's here left GRID on a database Performance screen with 10 sec. refresh interval. Shutdown process is:
a) stop oem_agent
b) shutdown abort
c) startup restrict
d) shutdown normal
e) start oem_agent
Guess what:
sqlplus /nolog
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Dec 8 17:24:33 2006
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> connect / as sysdba
Connected.
SQL> select sid,serial#,status,username from v$session
2 where program = 'OMS';
SID SERIAL# STATUS USERNAME
232 3 INACTIVE SYS
SQL> alter system kill session '232,3';
System altered.
SQL> select sid,serial#,status from v$session
2 where program = 'OMS';
no rows selected
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup restrict
ORACLE instance started.
Total System Global Area 1761607680 bytes
Fixed Size 2057480 bytes
Variable Size 788531960 bytes
Database Buffers 956301312 bytes
Redo Buffers 14716928 bytes
Database mounted.
Database opened.
SQL> select sid,serial#,status,username from v$session
2 where program = 'OMS';
SID SERIAL# STATUS USERNAME
234 7 INACTIVE SYS
SQL> Obviously, SHUTDOWN NORMAL waits forever and backup process hangs.
Now, AFAIK remote connections AS SYSDBA to a database in restricted mode are not allowed:
SQL> connect xxx@xxx as sysdba
Enter password: *********
ERROR:
ORA-12526: TNS:listener: all appropriate instances are in restricted mode So question I have is how OMS server which is, obviously, on a separate box can make a remote connection AS SYSDBA to a database in restricted mode? And how to prevent it so database could be shut down in normal mode?
SY.2 mnazim : Oracle Enterprise Manager 10g Grid Control Release 10.2.0.2.0
2 bazzza : Grid credentials are set to connect AS SYSDBA. However, as I stated, database is in restrict mode, therefore listener service is in restricted mode:
oracle> lsnrctl status
LSNRCTL for HPUX: Version 10.2.0.2.0 - Production on 11-DEC-2006 11:29:07
Services Summary...
Service "yyy" has 1 instance(s).
Instance "yyy", status RESTRICTED, has 1 handler(s) for this service...
The command completed successfullyand should not allow any connections except local connections AS SYSDBA/SYSOPER, while grid "magically" makes a remote one:
SQL> connect / as sysdba
Connected.
SQL> connect / as sysoper
Connected.
SQL> connect xxx as sysdba
Enter password:
Connected.
SQL> connect /@yyy as sysdba
ERROR:
ORA-12526: TNS:listener: all appropriate instances are in restricted mode
Warning: You are no longer connected to ORACLE.
SQL> connect xxx@yyy as sysdba
Enter password:
ERROR:
ORA-12526: TNS:listener: all appropriate instances are in restricted mode
Warning: You are no longer connected to ORACLE.
SQL> 2 Ugonic: Your statement "It connects direstly using it own settings" is not true. OMS makes a regular SQL*Net connection (with some twist, obviously):
SQL> connect / as sysdba
Connected.
SQL> select sid,serial#,username,osuser from v$session where program = 'OMS';
SID SERIAL# USERNAME
OSUSER
235 17 SYS
SQL> host
oracle> lsnrctl stop
LSNRCTL for HPUX: Version 10.2.0.2.0 - Production on 11-DEC-2006 11:13:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=local10i)))
The command completed successfully
oracle> exit
SQL> alter system kill session '235,17';
System altered.
SQL> exec dbms_lock.sleep(30)
PL/SQL procedure successfully completed.
SQL> select sid,serial#,username,osuser from v$session where program = 'OMS';
no rows selected
SQL> host
oracle> lsnrctl start
The command completed successfully
oracle> exit
SQL> select sid,serial#,username,osuser from v$session where program = 'OMS';
no rows selected
SQL> exec dbms_lock.sleep(30)
PL/SQL procedure successfully completed.
SQL> select sid,serial#,username,osuser from v$session where program = 'OMS';
SID SERIAL# USERNAME
OSUSER
235 23 SYS
SQL>As you can see, stoping listener prevents the connection. So my question still stands. I will trace SQL*Net on level 16 on both sides (grid & db) when I'll have some time to see if there is some "magic" parameter in handshake/connect request.
SY.
P.S. All that time agent was down:
oracle> status_oemagent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent is Not Running -
My phone didn't have space on it when I originally tried downloading a large app (Infinity Blade), so I downloaded the app on my computer to save time and removed apps from my phone to make space for it.
I then connected my phone to my computer and transferred the app across onto my phone and it works fine.
However, everytime I visit the App Store on my phone it starts downloading this same app until it tells me there isn't enough space for it at which point the app goes back to its normal already downloaded self and I can carry on playing the same game.
How can I stop it from trying to re-download everytime I visit the app store?If it's still trying to download the app to your phone, then it thinks the app is not on the device.
A reset or restart would be a good starting point to clear up the attempts to redownload the app. -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
How can I stop a report service manually ?
How can I stop a report service manually in DOS command?
I only know start a report service manually in DOS command.For example:rwserver service=repljbassMy start/stop scripts for Solaris looks like this.
Start:
rwserver.sh server=reportserver batch=yes
Note: batch=yes means that the extra control window doesn't start (at least on Unix)
Stop:
rwserver.sh server=reportserver shutdown=immediate authid=repadmin/reports
Just remove the .sh and it'll work on your PC.
PS. The complete Solaris start command I use is:
exec nohup rwserver.sh server=reportserver batch=yes & -
Ever seen the error "ialmrnt5 display driver has stopped working normally"?
Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
THANKS!Hi,
It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
Regards,
Zuriel -
Mavericks: Can I stop these heavy handed tactics?
Can I stop Apple's/Mavericks' heavy handed tactics when it comes to sofware updates? I am annoyed. Here is what I am talking about.
I think I have the right to decide if, and when, I install an update without being harrassed. I am not concerned abou the Time Machine nag partially depicted because I can simply dismiss it.Please send feedback to Apple: http://www.apple.com/feedback/macosx.html
The only way to avoid these updates is to actually perform the requested update.
However, you can work around the problem. Make sure to archive the software you currently have. That is always a good idea, by the way, even with the Mac App Store. Then, perform the update. Next, copy the new version of the software that you don't want (let's call it "Pages") to some obscure place on your hard drive or permanently connected volume. Now, use LauncPad to officially delete the software. Finally, copy the old version into /Applications.
Since the old version has the correct receipt, it will work normally. Since the new version is on the hard drive, you will no longer be nagged about updating. The old version is in LaunchPad so that is the one you will launch. If necessary, you can set your document types to only open with the old version. -
these days i face this problem.whenever i click on a site it appears in a new tab.how can i stop it?
The Google Search setting has an option '''Where results open'''. If it is selected, you can try deselecting that. If it doesn't solve the problem, please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options]
Maybe you are looking for
-
Is it possible to choose the serial port if only the run time engine is installed
I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example "Hardeware input output -> serial -> Labview serial vi")
-
As others have posted, my display has begun its 3-flash routine with the lower half of the screen darkening. There are already all the helpful directions to Moniserv and its inverter parts, but...When I first had this problem two years ago, I solved
-
Please help! How to increase font size in RemoteApp?
I have weak-sighted user. There is some RemoteApp running on Windows Server 2008 R2 Standatd x64. I need to increase scale of fonts to 125% and use 120 dpi fonts for this user. But increasing scale of fonts disabled on RDP Session. Option to use 120
-
my pen tool won't work when i click on it, is there a way to get it working again?
-
How to get document liked to material
How to get documents liked to certain material? I have material number and I want to get the document number of each linked document. I tried to use MATERIAL_READ_DOCUMENTS function, but the call returned "SYSTEM_FAILURE". Here is the code: theFunc =