I can't write a message in chinese inputHelp

i had upgrade the Android 2.1 version, but i can't write a message in chinese input .... all the setting i had choose the input method in the setting = Language & Keyboard~~~but in the message setting there it's not showing any chinese input language....what should i do now? Help Me please, thank you!

Hi Marie, open messaging app, tap new message, long press in 'Write message' area, select Input method, see if there is an option for Chinese keyboard.

Similar Messages

Hi, I have Moutain lion os x 10.8.2 and I can't use I message and FaceTime. please help me

Since I went to an Apple center in St Maarten( french side). They had to clean my computer but when they gave it back to me, Face time and I message did not work anymore.
Please help me.

Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
2. install OS X copy 1
3. install OS X copy 3
4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available.

I can't edit my messages anymore...help??

I could always edit text messages, but that seems to be gone now...instead of 'edit' - on the top right I see 'contact'.... I don't want to 'contact', I want to remove some old content within a message, but don't seem to be able to as of today...

The creative cloud application manager is apparently seeing The standalone installation and is reporting that it is up to date. But you cannot activate Lightroom from the creative cloud with a serial number because there isn't one. You'll have to install Lightroom. Then you might have to quit the application manager and sign in again before Lightroom is listed as available for installation. Then, install from the creative cloud application manager and you should be good to go.
Incidentally, I still have Photoshop CS6 installed on my computer. It isn't part of the creative cloud program. But the application manager reports it as installed and up-to-date. When I first installed the creative cloud, Lightroom was listed as up to date even though it was the standalone version. The only way you are going to resolve this problem is to uninstall Lightroom and then install it from the creative cloud application manager.

Can't write or send email

I have been having problems with my Mail Program on my new I-Mac starting about 3-5 days after I got things up and running.
I have been reading the strings about not being able to send mail and have tried a few suggestions without any success. There are some more suggestions on the forum yet to try and I will get to them shortly.
The problem I would like to get solved first is the fact that I can Address an email, I can write in the subject line, but when I try to write a message in the message body all I can type is about four letters and then it quits. My cursor even disappears. However I can cut and paste a message from a word processor and get it in the message body.
So it is not going to do me much good to solve the sending problem if I can't write a message anyway.
This problem is the same on both my ISP and .mac accounts
I have reset my permissions and called my ISP to see if they have change any of their settings.
Entourage works well with my ISP account. I have not set up my .mac account in it yet. I would like to get Mail working and use it exclusively if I can.
Any help will be appreciated.
I-Mac G5 Mac OS X (10.4.3)

I have been having problems with my Mail Program on
my new I-Mac starting about 3-5 days after I got
things up and running.
I have been reading the strings about not being able
to send mail and have tried a few suggestions without
any success. There are some more suggestions on the
forum yet to try and I will get to them shortly.
The problem I would like to get solved first is the
fact that I can Address an email, I can write in the
subject line, but when I try to write a message in
the message body all I can type is about four letters
and then it quits. My cursor even disappears. However
I can cut and paste a message from a word processor
and get it in the message body.
So it is not going to do me much good to solve the
sending problem if I can't write a message anyway.
This problem is the same on both my ISP and .mac
accounts
I have reset my permissions and called my ISP to see
if they have change any of their settings.
Entourage works well with my ISP account. I have not
set up my .mac account in it yet. I would like to get
Mail working and use it exclusively if I can.
Any help will be appreciated.
I-Mac G5 Mac OS
X (10.4.3)
I have the same problem.
Carried out recent tiger upgrade - software update online- and Mail started to malfunction in the same manner as you describe.
Previously worked fine.
Use a mail server at work - no changes there,
No answer as yet but sympathise.

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

Populating error message based on search help

Hi team,
How can we populate error message in a shopping cart account assignment "order " field for the bellow two senarios. I am adding a custom field called "Operational Activity" in account assignment. based on which search help has to be done
the 2 senarios are
1. When user does not select the "Order" but tries to search for the operational activity, he should get error .
2. When user selects the "Order" and this order has an operational activity linked to it, then give error message to input the OA The logic will be to do a RFC call to ECC by sending the SRM Order number BBP_PDACC-ORDER_NO to ECC table AFKO and see if there is AUFPL.
Edited by: goutam kolluru on Nov 16, 2011 5:48 AM

Hi Anshu,
Thank for u replay.
yes it can be done using doc_check_badi, but my question is how can we display error message by comparing search help values.
if user is not entering value of order field and select search help for custom operational activity field how it can be done in check badi.
Edited by: goutam kolluru on Nov 16, 2011 6:54 AM
Edited by: goutam kolluru on Nov 16, 2011 6:59 AM

How to suppress No Input help is available message .

HI Gurus,
Am in a situation where BI queries are shown in Portal .
While executing some of the BI queries am getting a message <b>No Input help is available</b> more then once <b>in the variabale entry screen</b>
But my queries are executing fine , no props atall.
So my question is Why i m getting this messages ,and how to suppress it.
it's a problem with BI or Portal.
am new to portal.plz suggest .
thanks in adavance.
regards,
prasad

Hi,
I dont think that this is the problem associated with portal.You are working on BI queries in portal but BI screen that you are working on is of SAP R/3 correct me is i am wrong??And the message you are getting is of R/3 screen,BI screens are shown in an iview and an iview cant show any message..
Regards,
Ameya

Why Can't I Write In message after Hitting Reply???

Hi
Mail have always worked strange... when I chose a message and click the "reply" or "reply All" icon a reply window appears but not always I’m able to write some message on this new reply windows. This new window comes with all heather information, but with a blank message.
I have noticed that it happens more often while downloading messages on the back.
Can someone tell me what to do??

Hola Sterling.
Not sure what you mean, but this could be caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Can write a few words, can't send any messages

Recently, with a pop account in Mail, Version 2.1, I can only write a few words (for a new message) and I can't send it.
I've already tried many stuff, in vain.
Could you help me?

The solution suggested by Bryan should work. This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.
7. If the problem persists, try again checking the Links between documents and applications option in step 3 instead.

How can I write the chinese characters in a web with my magic mouse?

How can I write the chinese characters in the search box with my magic mouse?

You can do it with a trackpad but I am not sure about the mouse. Take a look at his link, http://support.apple.com/kb/HT4288

How to send messages in Chinese via FIOS e-mail

My wife was previously able to write messages in Chinese on her I-Pad and send them via Comcast e-mail. When she tries to do the same on our new FIOS account, the Chinese characters are lost and replaced with question marks. Incoming Chinese messages are completely scrambled with nonsense characters. How do we rectify this issue?

Thanks for your comment.
en....I want to do something..I will maintenance a users list
in charroom.
I write a function in main.asc file , client can get users
list via call the function.
I write some codes in application.onConnect
when a user connect, it will add users list.
In application.onDisconnect, when a user disconnect, it will
remove from users list.
My hope when a user disconnect, I send a message to
shareobject. the shareobject is called in other clients.
Other client can retrieve the remove user message, they will
call the function to get new users list.
It is my idea. Can you give me some codes for my idea?
Thank you very much.

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Error while relocating (Can't write file (no space)) - Help please

I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205

It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

Windows error msg: "Can not write to drive G: Joe's iPod"

Halfway thru the download process (1780 songs) from itunes to my ipod I get a windows error msg:
"Can not write to file G: Joe's ipod. All the data has been lost. Check for an error on your computer or network."
Getting the error msg: " Can not write to drive G: Joe's ipod. All data has been lost, your computer or network may have failed."
"Windows/ My computer" shows my ipod as drive G: and itunes starts up properly when I plug my ipod into my firewire port. About halfway thru the download (1780 songs) the transfer from itunes to my ipod stops and I get the above error message. (Never worked with USB). I am not on a network.
According to tech supt, I have:
-Installed Service Pack 2,
-Restored ipod to factory settings
-Installed update 5.0.1. Everything worked fine last Feb with the version 4 of itunes when I first loaded everything up.
Have tried to reinstall version 4, but no luck.
My ipod charges fine thru the firewire cable.
Any ideas?? Thanx anyone.

Joe,
I am having the same problem, did you ever solve it, please email me at [email protected] with any help
Thanks

Ipod not syncing with itunes. delayed write failed message

yes i know there are already posts with similar problems but i cant find any with working answers...if answers at all. so sorry if this annoys you but im helpless.
i have a 80gb ipod classic (with the click wheel thing) and whenever i connect it to my pc it comes up on the my computer screen under devices with removable storage. . I can go through files etc as i have disk use enabled but for some reason it wont show up on iTunes. i have had the ipod for about 6-7 months and before everything would work fine. just recently it started playing up and wont appear on itunes. i did the 5 R's thing but no luck.
also i formatted the ipod and then it shows up on itunes but tells me restore to factory settings...which i follow i let it do everything but then nothing happens and then it doesnt appear in itunes as it said it would.
oh yh i also get a message pop up out of the task bar saying 'delayed write failed' while the ipod is plugged in my pc is very very slow until the write delayed message shows up. then after this message i get a message in itunes saying ipod was detected but couldnt be identified. something along those lines.
there is also a file in my ipod sayin metadataneverindex. it is 0kb so could it be that which is causing the problem. as far as i have read here and there that it is for mac but i use windows xp. is this the problem?
im at my wits end as i use my ipod a lot and would really really appreciate if anybody could help me out.

Go to iTunes>Store and Authorize the computer. It will say if it is authorized when you try to authorize it again.
Is the the computer you last synced with? You did not answer that question.

I can't write a message in chinese input~~Help~~

Similar Messages

Maybe you are looking for

I can't write a message in chinese inputHelp