I cant access a website with my AX but if i swap it out with a linksys i can access it. Any ideas how to make the AX work?

As I stated I can t access a specific website. Here is some of the specifics.
1 The website is a redirect from USAJOBS.
2 The websites are goverment sites.
3 The AX is 2nd gen
4 Configured as DHCP
5 The other router is a Linksys
6 The Linksys router is configured as DHCP also.
7 When the redirect happens it just hangs. Nothing is returned.
8 The Linksys is my sons ans will be returning to college in August.
Does anyone have any ideas?
Thanks

"Hard reset" the AirPort Express (see below):
While you do that, it's a good idea to reset your cable or DSL modem as well. Make it a rule to reset your modem whenever you connect something different to it. Failure to do that could conceivably explain the problem you are experiencing.
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.
Following the "hard reset", reconfigure your Express.
Resetting an AirPort Base Station or Time Capsule FAQ

Similar Messages

I have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

Greetings Lex,
Kind of you to comment ... but you are also adding years to my signature! I know I'm 76 but I don't want to think about it.
Regards 71.

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

Any idea how to exchange the CTI-OS Lincense with CAD License?

Any idea how to exchange the CTI-OS Lincense with CAD License?

Hi,
I think that you only have to install the CAD component in the PG or another machine.
If you need a file license, contact your AM in order to get an upgrade from CTIOS to CAD.
Hope this helps,
Juan Luis

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.

I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

Are you using a Mac? It sounds like you are using his computer to sync to. If this is the case, then it will sync to all of his stuff unless a new user is created with your personal stuff on it.
When you want to sync your iPhone to that computer, switch to your user first, and then everything will sync with your stuff. If he wants to hook up his iPhone to sync it, then he needs to switch back to his own username first.

My phone is stuck on the loading sign with a black screen behind it ? any ideas how to fix it?

my iphone 3g is stuck on a loading sign with a black screen behind it as though it was switching off ..any ideas how to fix it?

Start here - http://www.apple.com/support/iphone/assistant/
"Frozen or unresponsive iPhone"

An Idea: How to make the Magic Timeline work with Tracks

i have thought about this for a title and i think i have found a solution. the magic timeline is pretty cool but with it we lost tracks. for broadcast (not only for that but mostly for it) you need tracks that are assignt in a special way and there is no way around it. so i came up with the following idea…
to make the magic timeline work with tracks it will be a like an audio compound clip, that will give you full access to the magic time. but it can be outputted to proper tracks assignment.
current audio compound clips don't show you the video if there is one. this one will. also audio can be tagged to a track so it will automatically drop into the right track. you can of course move the audio from one track to another. moving the clip to another track will auto change the tag to new track. if you copy an audio clip from one track to another, the original clip will keep its tag but the copied one gets the new tag.
example…
you do a voice over with all your edits and stuff. then you collapse it to a track (new name to get rid of any sort of confusion). you can tag/name the track to "voice over" or whatever you want and color label it.
you need to edit, adjust it? no problem! double click it and it will open up and you'll see the magic timeline. edit till you done and click on arrow to return to track view.
export your movie with proper tracks for broadcast right out of final cut pro x
in the end your output timeline looks like a timeline from fcp7 before you output it on tape.
could this work? i believe it could and it would help to make fcpx ready for broadcast.
i hope this makes some sort of sense to you
anyway, i hope apple will include this or something like this in an update for fcpx.

You may be able to get by with just running MDT 2010 for now. *However* you *must* ensure that you are running WinPE 3.1 or greater, If you are unsure, open up a command prompt in WinPE (PRess F8), and run "ver" it should say build 7601 or greater, 7600
and less is not compatible.
When done, Run the Dell Advanced Format tool in the Full OS on a deployed machine to verify: http://del.ly/afhdd Although it is possible to install an OS on an Advanced Format Drive
with WInPE 3.0 or earlier, and it may *appear* to work, performance may suffer. The Dell AF tool should tell you if the sectors are aligned properly.
Additionally, it is also possible that the storage driver you have installed in your image is incompatible with AF drives. Check the Make/Model and check with the Hardware Mfg to see if they have driver that supports AF drives.
Keith Garner - keithga.wordpress.com

I tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package anyone got any ideas how to fix this?

i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?

There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit***

I am trying to move all itunes files to my new laptop and was able to do with home sharing, however I now have no idea how to keep the itunes on my new computer when I dispose of the old as all files are inaccessible when the old computer is disconnected

is there anyway to save the files so that they stay in my new computer?

I wouldn't use Home Sharing for this. These are two possible approaches that should work.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
tt2

1080P mixed with 720P - how to make the workflow work best?

Dear Forum
I am starting a new documentary and before i start i want to clear something out..
I have shot most of the footage in 720P But maybe about 1/3 of the footage is in 1080P (I was requiered to do so because some of the footage was used for television)
My question is: How do i start my project workflow with mixed footage??
When choosing a 1080P sequense and scaling to resize the 720P footage, i am unable to use the warp stabiliser on the "up-Scaled" 720P footage... Thats basicly the problem..
Please Help!
Thanks in advance!
- Simon

Do a test for yourself
Not sure about that film grain idea though!
Here is your upscale....

HT2693 probles with ipad2 after iOS 7.02 Upgrade, any idea how to fix this?

I am able to connect to any Wi-FI network, however, my iPad after connecting doesnt have access to the internet, i have tried other devices in teh same network and they work fine.
is there a new update that fixes this issue?

That Didnt work,
its actually happening only to my Apple Products, none of my Other products are having problems.
i unplugued the Router and plugued it back in and still nothing.
any other sugestions?

My iphone won't sync with Outlook contacts or calendar anymore. Any idea how to do this now?

I used to be able to sync my iphone contacts and calendar entries (home calendar) with outlook and now it won't work. How can I fix this?

Does iTunes Show an error message?
How did you setup syncing with Outlook, are you syncing them via iTunes using USB or Wi-Fi or an Exchange server?
For more info on USB syncing and all of the other options, take a look at this Apple doc -> iOS: How to transfer or sync content to your computer
If you aren't sure try setting up USB syncing again, just connect the iPhone to the computer, open iTunes, click the Info tab across the top of the screen, scroll down to Contacts and choose to sync contacts.
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Address Book Contacts" on your Mac.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, or Windows 7)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista / Windows 7)
Address Book (Mac OS X)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Note: If using Microsoft Entourage, use Microsoft Entourage 2008 12.1.2 or later if syncing with Mac OS X v10.6 or later. If you would like to sync data on your Mac with Entourage, enable syncing between Entourage and Address Book.
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

Could you post an example of the filter message?
This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

I cant access a website with my AX but if i swap it out with a linksys i can access it. Any ideas how to make the AX work?

Similar Messages

Maybe you are looking for