I cant open my itunes all of the sudden, i can click on it and nothing happens even when i plug my ipod in
all of the sudden my itunes want open on my pc, i don't even know what os it is. windows 95, and i've never had a problem before. just all of the sudden it want come on
Just go to your iTuens preferrences and disable sharing.
Similar Messages
-
how do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.
Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling -
Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in AdvanceHi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance -
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?
ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message? -
I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.
Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account. -
I purchased music on my iPad (and it works fine). It populated my purchased list on my home computer but will not download (purchase is no longer a given option) ?? when I access it in the iTunes store I can click on play but nothing happens…how do I get it to download on my computer ?
If you connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases then it should copy over to your iTunes library. Depending upon what country that you are in you might also be able to redownload it on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
-
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
I cannot make a simple purchase of a $.99 of Beethoven's 9 symphony 4th Movement. When I click on the orchestra, a pop-up states "connecting - loading" and nothing happens. When I click on "View iTunes" for this selection, nothing happens.
AlexCarey, I've been having issues purchasing recently and place a number of calls to the support team. On Oct. 5th, and on my own decision, I went into my itunes profile and re-entered my credit card expiration date and security code. (Notice, it is not displayed for safety measures.) Today, I received an email from Apple support verifying if I made changes made to my account. For the heck of it, I logged back into itunes; click "Buy". It's working again after three days of failure. However, diagnosis still displays "Secure link to itunes store failed". Very confusing state of affairs, lately. See my post on "Itunes dilemma"
-
Tried updating my iPad wirelessly today. Process seemed to have gotten stuck and later wi fi crashed (in that order, I believe). Restarted iPad and got a picture of a wire leading to iTunes icon on the iPad screen. Nothing happens even when connected it to my Windows 8.1 PC, and iTunes doesn't seem to recognize the iPad.
Hello there, uromr.
The following Knowledge Base article provides some great troubleshooting steps for the issue you're having:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If once the iPad is recognized, you still see the Connect to iTunes Screen, then this article provides some additional steps for updating your device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
An Apple TV update was processed (Steps 1 and 2). The Apple TV device then did not indicate it was on. I press the remote button to turn it on and nothing happens. What is wrong? What do I have to do? I even replace the battery on the remote to insure it was working.
Welcome to the Apple Community Glenn283.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.
Angela Richens wrote:
It is all attachments not just pdfs.
Then most likely it is not caused by Adobe Reader.
Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ... -
When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5
Look in your Applications folder. Is there a Mac OS X Mavericks installer in the folder? If there is then select it. Press COMMAND-I to open the Get Info window. See if the size of the file is around 5.3 GBs. If it is then try double-clicking on it to run it. If you cannot run it, then you have an incomplete download. Try it again. It's a very large file, and unless you have a really fast pipe it can take longer than 45 minutes to download.
-
I bought a book on iTunes (a small pamphlet on upgrading to Mountain Lion) and I double click on it and nothing happens. iTunes store does indicate that the file was downloaded.
I am not a hundred per cent sure but my guess is that you have to sync that pamphlet to an iPhone or iPad to read it just like ebooks
-
I click a box on a website and nothing happens. When I hover over the button "javascript:void(0); appears on the left"
same issue
-
Just got an iPad. Have created an Apple ID but can't log into the apps store. Press sign in and nothing happens. Any advice?
Have you just created the Apple ID? If so it's possible you may need to activate it after receiving an email? Have you checked for an activation email? I can't be sure if it does send one or not as did mine ages ago.
You may also find this useful if you continue to have problems: http://www.apple.com/support/appleid/
Regards,
Steve
Maybe you are looking for
-
B&W have first rev board and wanting to up machine with new 7000 Radeon
I have a first rev board G3 B&W with the ATI 128 rage card and on this card it has a DVD decoder card on it. What I am wandering is that when I remove the 128 rage card with the dvd decoder card on it. Will I loose the DVD use on my dvd cd rom with t
-
How to access request content using MultipartMessage Object
I want to take a file from the Client and upload it as a FileInputStream on the server. I have a simple form as follows: <form action="scan" name="scan_files" method="post" enctype="multipart/form-data"> <input type="file" name="file1"> <input type="
-
Problem with Atf, Image distortion
I got a problem with image Distortion Here my atf in atf viewer: [IMG]http://i.imgur.com/d75aU.png[/IMG] Heres my atf in FLashPlayer using 11.4.402.287: [IMG]http://i.imgur.com/H2vEV.png[/IMG] notice the red pixel in the green part of the texture. Im
-
Is anyone else afraid of the new 14,338 word iTunes license?
I opened iTunes today, went to purchase a song and was presented with a new iTunes (Australia) license which scared me a little, the thing is over 14 thousand words, of which I don't have a great deal of time or effort to read. Why is it so long? Cou
-
JasperPrint: how to join many JasperPrint's
Hi there! I'm sorry to bother you, but I have a situation here and I need your help. Well, how can I join many JasperPrint's? Like this: I have "a.jasper" and "b.jasper" but I want only a single JasperViewer. Can you help me? Thanks, Helder Arruda