I cant open - restore window window opens then it does not respond

i cant open - restore window window opens then it does not respond

Welcome to the forum.
Do you mean the entire GUI of PrPro, or just one of the Panels?
I would look into Resetting the WorkSpace first, to see if that clears up the issue.
If not, I would trash the Prefs for PrPro, to see if it's from a corrupt Prefs file.
If you still have no luck, then perhaps post much more detail, so that we know what you are faced with, and probably a screen-cap of what you are seeing.
Good luck,
Hunt

Similar Messages

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
But first check the product requirements.

Nano was working perfectly until I had to reformat for windows computer. Now, it does not respond well to touch.

I recently purchased a ipod nano and briefly had it synced with my macbook pro. I recently sold my macbook pro and had to reformat ipod nano. Since then, the ipod nano does not respond very well to touch commands and sometimes goes into apps that I did not select. It is impossible to switch from page one to page two one app screen.
Thanks,
acdc1996

Hey acdc1996,
Welcome to Apple Support Communities! Even if you have a different generation of nano, you'll want to check out the troubleshooting steps in the following article as most of them would still be applicable:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Have a great day,
David

I can open itunes but then it does not respond

I can open itunes and it opens right up. Then i get the blue loading circle for like 5 minutes then after it just freezes. It doesent respond to being clicked on in the taskbar or clicking a song. It doesent crash its just not responsive? I have windows 7. Also i signed in on another account and it worked just fine just had no music on it. I tried reinstalling it already and nothing happened or changed.

Try starting iTunes in safe mode by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

Adobe Reader Does Not Respond in Windows 8

I need to do a simple edit of a pdf. I've been editing pdfs using nothing but the free Adobe reader for years. Now I got a new laptop - 64 bit Windows 8 and I installed the current reader. I need the Adobe reader for other programs I work with. I have noticed that the adobe reader is slow to open and constantly says "not responding." I also cannot get it to respond so that I can fill in a form (i.e., a basic edit), which I could always do. Please tell me how to fix this!

I figured it out! I have Adobe Reader XI on my desktop. I opened it up. I went to Edit/Preferences/Security (Enhanced) and disabled the "Protected Mode at startup." My Adobe pdfs now respond and I can edit them without issue.
Date: Tue, 28 Jan 2014 10:28:26 -0800
From: [email protected]
To: [email protected]
Subject: Adobe Reader Does Not Respond in Windows 8
    Re: Adobe Reader Does Not Respond in Windows 8
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
Do you have Adobe Reader Touch for Windows 8? Or Adobe Reader XI for Windows desktop?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6061471#6061471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6061471#6061471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6061471#6061471. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Some times firefox does not opens facebook and google pages and this does not happen for other sites. Iam Currently using windows xp and using 3.6.3 Firefox version.Please help.

Some times the fire fox does not open google and facebook pages but it does not happen for other sites. Iam currently using Windows xp and iam using Mozilla Fire fox 3.6.3 .Please help
== URL of affected sites ==
http://www.facebook.com,www.google.com

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

Weird issue: my ipod lost all its music, itunes does not respond to ipod, and itunes itself becomes unresponsive, and then I cannot open itunes again after I forcefully close it

I just don't understand how all these problems roll into one issue. One day my ipod was unresponsive so i reset it and then all the songs disappeared. That happended before, but it became fine after I connected to itunes, but once I connect it to itunes it pops up but itunes is loading for etenrity and does not respond. If I close if forcefully then itunes won't open at all. cursor indicates loading for a second and then stops.
What is this?

When i said reboot, I meant "restarts my Ipod".
I tried installing driver to no success. What could be wrong? My Ipod just doesn't communicate with my computer since the latest Itunes was installed.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Hello The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try t

hello
The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try to open it is no use. OS Y 10.10.2 (14C1514)

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

Database could not be opened. May be caused because database does not exist or lack of authentication to open the database.

Hello,
I've been running the DMV 'sys.event_log', and have noticed that I am getting a lot of errors about connection issues to some of my SQL Azure databases saying "Database could not be opened. May be caused because database does not exist or lack of authentication
to open the database."
The event type column says: 'connection_failed' and the event_subtype_desc column says: 'failed_to_open_db' both are associated with the above error message.
I know that these databases are on-line as I have numerous people connected to them, all of whom are not experiencing any issues. My question is, is there a query that you can run on SQL Azure to try and find out a bit more information about the connection
attempts?
If this was a hosted SQL solution it would be much easier.
Marcus

Hello,
As for Windows Azure SQL Database, we can't access the error log file as On-premise SQL Server. Currently, it is only support troubleshooting the connection error with the following DMV. The SQL database connections events are collected and aggregated in
two catalog views that reside in the logical master database: sys.database_connection_stats and sys.event_log. We can use sys.event_log view to display the details if there is error occurs.
Just as the connection failed describe, it may ocurrs when user didnot has login permission when connect to the SQL Database. If so, please verify the user has logon permission.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

When i open firefox it runs in background but does not open. if i disable the internet connection immediately it opens. each and every time i do this when i start work. what kind of problem is this

i am using windows xp profession sp3 os
when i open firefox it runs in background but does not open(see through task manager or one message "firefox is already running in background" when i again click the icon.)
if i disable the internet connection, immediately it opens. each and every time i do this when i start work. what kind of problem is this
== This happened ==
Every time Firefox opened
== i every time starts firefox

I had the same problem and it was because of my firewall settings, which I had set to block all activity and forgot to reset it.

I cant open - restore window window opens then it does not respond

Similar Messages

Maybe you are looking for