:( i cant see bluetooth in connection manager of ...

i have nokia 6630
pc suit version 6.4.8
using unbranded pc
windows 2000 sp4
usb bluetooth dongle adaptor
in device manager it shows ISSC bluetooth device
bluetooth device by IVT corporation
when i open my connection manager, there is no bluetooth connection i can use, but only irda, serial and usb are available.
i dont know what bluetooth stack is, but i cannot see bluetooth icon in the control panel either (like in windows XP).
if i use the software provided with the device, everything works fine, but i cant connect my fone to pc suit, as there is no bluetooth option available.
please help

i thought i had the latest version.
but now i have updated my software versions (both pc suit and blue soleil)
my pc suit now shows bluetooth connection and it also proceeds with searching devices, it also lists my fone in the list. but when i select my fone it asks for the passcode, i entered the passcode in the pc but nothing came on my fone (i mean passcode window).
pc suits gives me the msg that this connection is available and u can now use pc suit to browse .........
but when i try any service of the pc suiut it says no fone connected
what now?????

Similar Messages

Why no bluetooth in connection manager ?

PC Suite 6.80.22 cannot connect to my phone (6021) via bluetooth.
When I run the Nokia connection manager, I can only choose infrared, serial data cable and usb data cable.
I do not have bluetooth !
When I use the windows explorer, I can make a connection there and I can manage files (upload, remove, download).
So I am sure my bluetooth device (Trust BT120) is installed and working correctly in my OS (Win2k SP4).
In my device manager, the bluetooth device is reported as a lan device.
I already re-installed the pc suite.
My question is : why don't i have bluetooth in the connection manager ?

Are you using a Mac?
If yes the following is irellevant...just incase..
Connecting the Phone to a USB Bluetooth Dongle. Using PC Suite.
Yesterday, I stayed up all night to figure this out. I called nokia support to see what they can do, and apparently the new drivers from Sitecom (the BT adaptor that I use) creates a "Cloak" over the Microsoft ones. (This is only if you have SP2!!)
Required for these steps:
~PC Running Windows XP on Service Pack 2. (how do I know if I have Service pack 1/2? Go to Start > Controll Panel > Classic View (on the top left corner, or if you already are then ignore this) > System. In system it will say which serivce pack you are running.
~PC Suite version 6.80.22 or later.
~Bluetooth Adaptor + Drivers for it
~Nokia Phone supporting a bluetooth In/Out connection.
~Patience (this may take half an hour depending on your PC Spec) (Took me 15 minutes)
So here is what I did:
First of all close all programs that you dont need running.
Start > Controll Panel > Add Remove Programs > Sitecom drivers
Remove ALL Sitecom (or which ever company's you use).
Reboot Computer.
Next put the CD/Floopy in the PC or folder that you downloaded have ready on your desktop, containing the drivers required for your adaptor.
If a autorun comes up cancel it.
Plug in your bluetooth adaptor to a permanent usb port! The port you plug it into will be the only and only port that you can run bluetooth from, dont ask me why. So use a good safe place. (I put mine in the back of my PC, not the front.)
Windows will now say that it has found new hardware. It will ask you if it can search the internet for drivers, click > Yes This Time Only.
It will search and wont find anything.
Now it will ask you if it can search for drivers on the PC, click : Yes, and tell it where the drivers are located, CD/Floppy, Folder. eg: E:\Sitecom/drivers/XP
Let it install. It will finish, then suddenly re-open.
Run the same step as above again. (dont ask me why..it just installes some more drivers.)
Finally it will finish and say that your software is ready to be used.
DONT TRY TO USE IT! THE SOFTWARE REQUIRED ISNT RUNNING YET. DONT RUN PC SUITE EITHER! DONT QUIT PC SUITE, AND DONT TRY TO USE THE CONNECTION MANAGER.
REBOT the PC.
Now when you go into PC Suite > Connection Manager, you should find a new connection. In my case:
Bluetooth (Sitecom)
and the old bluetooth connection looks like this:
Bluetooth (Microsoft)
The connection is very fast and stable. You can browse the phone as if it is cable connected which is awsome. Transfer speed depends on your adaptor, but it averages between 1 - 3 Megabites Per Second.
Hopefully this works for you too!
Good Luck,
Tal
I own a 5210, 5140 and now..the new 3250. Symbian 60 Series OS 3.0 ..just the best.

Decktop 6.2, HotSync not see Bluetooth as Connections option, Vista 64-bit

I got a new Dell Studio XPS with Vista Home Premium 64-bit and discovered that I could not perform a USB sync with my Treo 755p (Verizon). Since bluetooth sync was recommended, I purchased an IOGear Bluetooth 2.0 USB Micro Adapter (GBU421) and allowed Windows to discover the device. When prompted by Windows to insert the disk to install the driver, I went to the IOGear website and downloaded the most recent software (WIDCOMM bluetooth software version 5.5.0.4400 released 03/11/09 for Windows XP & Vista, 32 & 64-bit). Prior to installing this software, I had done a "clean" uninstall of all Palm files as directed in these forums and did a restart of the computer. I installed the bluetooth software & configured it to be "discoverable" and did another restart. Finally, I downloaded Palm Desktop 6.2, installed it and restarted the computer again. However, HotSync Manager does not see Bluetooth as one of the Connection options. My Treo 755p does "see" the computer when configuring bluetooth. Is there any hope that I may be able to sync this computer with my 755p or am I forced to look for a different smartphone? Any suggestions would be greatly appreciated. Thanks.
Post relates to: Treo 755p (Verizon)
This question was solved.
View Solution.

bonz1973: It worked! I am so relieved & happy after so many hours of frustration. I want to thank you so much for your reference to messages #353 & #354 on "Vista 64 Hotsync solution found!" I want to share some of my experience that may help someone else. My comments are in [ ] and take off of those from edwardek.
1. Installed Palm v4.2 [I found that I did not need to do this]
2. Installed Palm v6.2
3. Installed Palm Outlook 2007 [ didn't do this part either since I use Outlook 2003]
4. Installed Bluetooth apps
5. Inserted the ... dongle in the USB port #6
[edwardek claims that he needed to use USB port #6 but my computer does not have a USB port #6. Instead it divides the many USB ports into Hubs. What' more important is that some software sets up the Bluetooth to transmit on a COM port. Mine was COM3. To see how your adapter software installed your Bluetooth devise, check the Device Manager in the Control Panel. It does list "Bluetooth Devices" where you can find the Device, right click, choose Properties, and see which USB port the Bluetooth adapter is in. However Device Manager also listed my Bluetooth under "Network adapters" and "Ports (COM & LPT)" which is important because I had to configure HotSync using Serical port COM3. I think it depends on the Bluetooth software you get.]
6. In your PC tray (at the bottom of your PC display), Right Click Hotsync Manager and select "Settings" [Yes, you need to configure your computer's HotSync method.]
7. Wait a long time (2 minutes) and the Hotsynch Manager window will be displayed. In that window click "Connection" and when the window opens click "USB" (a checkmark will then appear), then click COM (a checkmark will appear), under this you'll see a pick list drop-down menu showing all the ports. Select COM6.
[I didn't have to wait at all for HotSync to display. Yes, check both USB and Serial connections and at this point a dialog box showed the Serial connection was COM3, matching what was in Device Manager. I suspect that some software actually creates a Bluetooth option that shows up in the Connections list like the instructions from PALM specify. My software didn't set up the Bluetooth device is this way and so I was totally frustrated by not finding Bluetooth on the Connections list.]
8. Next set up your Bluetooth application and make sure it is paired with your Treo (I'm assuming everyone knows how to do this but in essence you make sure the Bluetooth application sees your Treo (your name) and that your Treo sees your PC (the PC name). [Before this step you have to configure your Treo so Bluetooth is ON and VISIBLE and you can see your computer as a Device. I had a shortcut to my Bluetooth software in the PC Tray beside the HotSync icon. Once I had the Connections set for USB and Serial in step 7 and the Treo set up to be Visible, the computer saw my Treo using the name I had given the Treo.]
9. From your Treo start the HotSynch, then on your Bluetooth application (Bluesoleil) right click on the Treo device and select connect. You should then see that the 2 devices are connected and the exchange begins. [Yes, start the HotSynch from your Treo.]
It worked for me and hope this helps you sync your Treo and your Vista 64-bit. Thanks for everyone's input and help.

I cant see bluetooth option while trying to transfer media files.

Hi all,
I have a Blackberry Torch 9810 with OS 7. I dont know what happened but all of a sudden I am unable to send files through bluetooth. I cant see any option of bluetooth in the send options menu.
I tried to deseclect port service in the bluetooth options and saved it. Againg selected port service and saved it. I also restarted my device while doing this. But still I am unable to send files via bluetooth.
Can some one help me please. Thank you.

Please restart the phone by removing and placing the battery back while the device is ON. This process fixes the application modules in it without losing any data stored. Let us know if you still experience the issue after this.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Downloaded ios 8.1.2 and now my wifi is not sliding to on.. I also cant use bluetooth or connect to icloud please help!

Recently downloaded ios 8.1.2 and now my wifi button will not slide to on and I also cant use bluetooth and icloud any ideas on how to fix this?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Cant see usb HDD connected to AE(n)

I accidentally unplugged power from my HDD while it was connected to my AE(n), and now I cant get the HDD to be recognized by the AE, or when connected directly to a computer with usb. Thankfully the HDD has firewire ports also, so i am able to access the drive that way. Any suggestions how to get this HDD to be recognized via usb again? Thanks in advance!
Mac OS X (10.4.9)

Yes, it is using a USB chip that the TC cannot talk to without a hub. This is due to lack of drivers I think.
I posted a thread to which I have no answers.. but if you would like to fill in the details I think it will explain what is happening.
https://discussions.apple.com/thread/5912861?tstart=0

USB drive connected to airport i cant see it??

Hello all, i have an airport extreme. network is all setup fine. I have a USB drive connected to the airport setup for timemachine backups. What i would do is turn it on every week for the day and all my mac would backup to it. Last night i turn it on for my backups and none of my macs seems to be able to find it. Well today right out of the blue the imac suddenly sees it and runs a backup. But i cant see it with the macbook pro. I double checked the setting on the airport and dont see anything out of place. I can however see the drive in finder but when i click on it system tells me it cant connect. Any suggestions?

WesternCanuk wrote:
Apple is now forcing me to purchase a time capsule as they do not support puggin in a USB drive.
it's not new. this information has been available for some time.
Now this worked perfectly
it did (and does) so for many users. it just means is that, if you run into problems (as you do now), there will be no support from Apple.
I now have to physically connect my usb drive to each of my computers to have them back up?
no. you'd connect the drive to one machine and let the other Macs back up to it via your network.
printer i suppose ?
yes. and HD's for sharing files across your network - just not for TM backups !
JGG

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

Verify Step 2 and 3 mentioned in the article.
http://support.apple.com/kb/TS1538

Cant see SQL Server tab on the New/Select Database Connection

Hi All,
I cant see the SQL Server tab in the new database connection window. I have added the SQL Server jdbc driver using the Tools->Preferences->Third Party JDBC Driver, but all I can see are the the Oracle and the Access tabs.
I am using version 1.5.4.
Any pointers is highly appreciated.
Regards,
Anish.

Hi,
I have SQL Developer Version 1.5.4 Build MAIN-5940.
I downloaded JTDS from SQL Developer Migration page and unzipped.
I added the driver in SQL Developer through tool/perference/database/third party vendor
I still cannot see SQL Server tab.
What else do I need to do to see the tab?
Thanks.
Tracy

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Cant see external Hard Drive connected to TC

Hey Guys
Love my TC but still cant get it to work as I want. I will list my challenges seperatley.
The first one is I have a hard drive connected by USB but I cant see it in Finder? I can see everything on my TC but not the connected HD.
Thanks in Advance
AC
(Its the latest TC with latest software)

What Bob suggested should work.
You can also plug the USB drive into a Mac.. Mac OS can read NTFS but not write to it. You could then copy the files to the TC. My experience is Mac reads NTFS very slowly..
You do want to get the PC working I think, by ethernet to the TC and copy the files.
If this is just temporary that is fine.. using the TC for a data store and mixing with Time Machine is not such a great idea.
IMHO USB drives are cheap.. go and buy a new one. So you can copy the files direct from one disk plugged into your computer to the drive correctly connected to the TC or to the Mac.. Keep the old USB as a backup or format it and use it for something else.

I cant see the option BW on connections voyager

Hello!!!
I have been installed the integration kit for SAP, but I can´t see in the Central Management Console specialy in the connections voyager the option to connect with BW SAP, how can I see the connection,
thanks
regards

Hi -
You should be able to see Voyager Connections at CMC home screen. If you are not seeing Voyager Connection means you need to check below stuff. Thanks!
1) It could be licencing issue. Make sure you have added correct licence key. Voyager licence comes separately.
2) Check weather Voyager Service is running or not. Go to CMC --> Servers -->Server Categories --> Voyager --> Multi-Dimensional Analysis Services Server.
Regards,
Anesh B

When i connect my i phone with pc i cant see it in windows nor in i tunes

when i connect my i phone with pc i cant see it in windows nor in i tunes

Does it even give some sign that the cable was plugged in? Don't know with i4's but my i5 will do a characteristic beep, indicating that it has begun charging. If no signs of life occur, may be that the cable or its connectors are damaged and need replacement.

How do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!

how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!

You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10

:( i cant see bluetooth in connection manager of ...

Similar Messages

Maybe you are looking for